could you please do a video of how you got this phone working with asterisk? i am stuck with "Discover 10.0.0.60 which is my asterisk freepbx server.. much appreciated.
Ciao, io ho fatto la stessa cosa con un modello 9640 ma mi succede una cosa molto strana...dal telefono avaya non riesco a fare consecutivamente più chiamate, ovvero...la prima va a buon fine...aggancio rieseguo la stessa chiamata e mi da dissuasione...aggancio ripeto e va a buon fine...aggancio ripeto e di nuovo dissuasione. Una volta funziona una volta no una si...una no...e sul debug di asterisk le chiamate che non vanno a buon fine neanche arriva la segnalazione ad asterisk ! Ti è capitato od è solo un mio problema ? Grazie Luca
hi, can you help me pls!!! i need update firmware of avaya 9608, i try using tftp server but i can´t. can you say me, hoy i must update my avaya 9608... Good video!!!
thx!!! i can upgrade my avaya 9608 bro!!! but i have problem, i configure sip domanin, port and transport 5060, but my phone dont log in, i can view acquiring service and not connect to asterisk... thx... Sorry my english is very bad..
Hi, Could you please post how did you configure the phone and the asterisk? I tried to do it but after the authentication I got "acquiring services" message on the phone and "Line Appearance In Use" text in the SIP message. Thanks!
Hello this is my 46xxsettings.txt where 192.168.178.2 is my asterisk SRVR 8.8.8.8 SET DOMAIN 192.168.178.2 SET SIPDOMAIN 192.168.178.2 SET SIPPORT 5060 SET SIP_CONTROLLER_LIST 192.168.178.2:5060;transport=tcp SET SIPREGPROXYPOLICY alternate SET CONFIG_SERVER_SECURE_MODE 0 SET SIPPROXYSRVR 192.168.178.2 SET SIPSIGNAL 1 SET SIP_PORT_SECURE 5061 SET ENABLE_AVAYA_ENVIRONMENT 0 SET PHNNUMOFSA 4 SET SNTPSRVR pool.ntp.org SET GMTOFFSET +01:00 SET DSTOFFSET 1 SET DSTSTART 2SunMar2L SET DSTSTOP 1SunNov2L SET DISPLAY_NAME_NUMBER 1 SET SIG 2 SET PSTN_VM_NUM "*97" SET MSGNUM *97 SET ENABLE_EARLY_MEDIA 1 SET RTP_PORT_LOW 10001 SET RTP_PORT_RANGE 9999 SET SIG_PORT_LOW 5060 SET SIG_PORT_RANGE 1 For asterisk a simple extension but instead of using udp ,use tcp ,this is the secret. transport=tc
+Pierluigi Grossi Hi, many thanks! Unfortunately doesn't work for me. :-( Did you use chan_sip or pjsip? Could you please send us the firmware version of the Avaya phone? I use: S96x1_SALBR6_2_2r17_V4r70.tar And I use Asterisk 13.5.0 Thanks!
+Szabolcs Róta i used chan_sip and firmware S96x1_SALBR7_0_0r39_V4r83.tar. Be sure your asterisk sip server is listening on tcp. For more information: www.linuxsysadmintutorials.com/using-sip-over-tcp-with-asterisk.html
could you please do a video of how you got this phone working with asterisk? i am stuck with "Discover 10.0.0.60 which is my asterisk freepbx server.. much appreciated.
I'm sorry, I haven't got this phone anymore.
You have to setup an http server to host your 46xxsettings.txt with your own sip settings
Try to post it.
I'll help you if you havent figured it out. If you're on discover, you're still on H323.
Ciao, io ho fatto la stessa cosa con un modello 9640 ma mi succede una cosa molto strana...dal telefono avaya non riesco a fare consecutivamente più chiamate, ovvero...la prima va a buon fine...aggancio rieseguo la stessa chiamata e mi da dissuasione...aggancio ripeto e va a buon fine...aggancio ripeto e di nuovo dissuasione.
Una volta funziona una volta no una si...una no...e sul debug di asterisk le chiamate che non vanno a buon fine neanche arriva la segnalazione ad asterisk !
Ti è capitato od è solo un mio problema ?
Grazie
Luca
No ma purtroppo non ho piú occasione di provare;segui la guida di 3cx ed il firmware lí suggerito
hi, can you help me pls!!! i need update firmware of avaya 9608, i try using tftp server but i can´t. can you say me, hoy i must update my avaya 9608...
Good video!!!
You have to use an http server and set on your dhcp server option 242 with ASCII HTTPSRVR=yourhttpserver
thx!!! i can upgrade my avaya 9608 bro!!!
but i have problem, i configure sip domanin, port and transport 5060, but my phone dont log in, i can view acquiring service and not connect to asterisk... thx...
Sorry my english is very bad..
Hi, Could you please post how did you configure the phone and the asterisk? I tried to do it but after the authentication I got "acquiring services" message on the phone and "Line Appearance In Use" text in the SIP message. Thanks!
Hello this is my 46xxsettings.txt where 192.168.178.2 is my asterisk
SRVR 8.8.8.8
SET DOMAIN 192.168.178.2
SET SIPDOMAIN 192.168.178.2
SET SIPPORT 5060
SET SIP_CONTROLLER_LIST 192.168.178.2:5060;transport=tcp
SET SIPREGPROXYPOLICY alternate
SET CONFIG_SERVER_SECURE_MODE 0
SET SIPPROXYSRVR 192.168.178.2
SET SIPSIGNAL 1
SET SIP_PORT_SECURE 5061
SET ENABLE_AVAYA_ENVIRONMENT 0
SET PHNNUMOFSA 4
SET SNTPSRVR pool.ntp.org
SET GMTOFFSET +01:00
SET DSTOFFSET 1
SET DSTSTART 2SunMar2L
SET DSTSTOP 1SunNov2L
SET DISPLAY_NAME_NUMBER 1
SET SIG 2
SET PSTN_VM_NUM "*97"
SET MSGNUM *97
SET ENABLE_EARLY_MEDIA 1
SET RTP_PORT_LOW 10001
SET RTP_PORT_RANGE 9999
SET SIG_PORT_LOW 5060
SET SIG_PORT_RANGE 1
For asterisk a simple extension but instead of using udp ,use tcp ,this is the secret.
transport=tc
+Pierluigi Grossi
Hi,
many thanks!
Unfortunately doesn't work for me. :-(
Did you use chan_sip or pjsip?
Could you please send us the firmware version of the Avaya phone?
I use: S96x1_SALBR6_2_2r17_V4r70.tar
And I use Asterisk 13.5.0
Thanks!
+Szabolcs Róta i used chan_sip and firmware S96x1_SALBR7_0_0r39_V4r83.tar.
Be sure your asterisk sip server is listening on tcp.
For more information:
www.linuxsysadmintutorials.com/using-sip-over-tcp-with-asterisk.html
+Pierluigi Grossi
The firmware, you suggested, works with Asterisk 13.5.0 (FreePBX 13.0.1beta3.62) and pjsip :-)
Thanks for your help!!!