matek opticalflow complete setup# matek optical flow sensor # lidar sensor

set debug mode=flow raw
set inav_ allow_dead_reckoning=on
set nav_ max_ terrian_flow_alt=200
set nav_max_surface_altitude=200
set nav_ mc_vel_z_p=150
set nav_ mc_vel_z_i=250
set nav_ mc_vel_z_d=25
set nav_ mc_pos_xy_p= 80
set nav_ mc_ vel_xy_ p= 50
set nav_ mc_vel_xy _ i= 40
set nav_ mc_vel_xy_ d= 60
• opticalflow with arduc...
• Micoair opticalflow se...

[@Sam-gr8pl]

Bhout achha video banya apna.. ye net per pehle video hai jo optical flow ka pura setup bata ta hai... just odered mine cant wait to test itThank you! Gps bypass command khy hai Arming k liye?

[@dronetechnology2772]

Just put ur stick to down side right and than arm( throttle stick)

[@dronetechnology2772]

I ordered from rc dhamaka and one more side u can ordered inside fpv

[@Sam-gr8pl]

Thank you@@dronetechnology2772

[@Cc19Bhokar]

I’m using this sensor with bee35 whoop and I set sensors alinement to cwflip180 but when activating hold mold quad goes high

[@dronetechnology2772]

I already explained everything that fly in home only and if u want to fly outside there is parameter

[@dronetechnology2772]

Don't mix gps with optical flow ur quad shotsup

[@Cc19Bhokar]

@@dronetechnology2772 I’m flying in home too

[@Cc19Bhokar]

@@dronetechnology2772 gps is not installed

[@dronetechnology2772]

It's not possible

[@vijay_gacche]

From where have you got the sensor

[@dronetechnology2772]

From site RC dhamaka

[@vijay_gacche]

@@dronetechnology2772 sadly sold out there

[@dronetechnology2772]

Try inside fpv

[@dronetechnology2772]

Robofusion.net u will get in almost 10 days

[@dronetechnology2772]

Reliable site china based

[@Terry_Fritz]

Thank you for adding the CLI commands in the comments. I have been working with Optical Flow on INAV for over three years and seem to learn a little more every time I find a new video on RUclips. I have a new SpeedyBee 35 quad and the results look promising with Optical Flow. It keeps me busy anyway. Cheers and thanks again. 🦘

[@dronetechnology2772]

Thanks

[@vijay_gacche]

Done all set up on sb mini f405 not arming even not any flag like navigating safe

[@dronetechnology2772]

Which firmware did u flash inav or arducopter

[@vijay_gacche]

@@dronetechnology2772 inav

[@vijay_gacche]

@@dronetechnology2772 first tried on inav 7 but quad doing weird things I broke up 3pairs of props

[@vijay_gacche]

But flying well on 7.1

[@dronetechnology2772]

Ok now what is the problem u r facing

[@PickMe_Gaming]

its not working on my drone

[@dronetechnology2772]

When u connect the battery to quad sonar sensor will become blue or not

[@PickMe_Gaming]

@@dronetechnology2772 yeah it become blue

[@PickMe_Gaming]

@@dronetechnology2772 then I testing it it look like going up then down again and again? do you have idea for that issue?

[@dronetechnology2772]

@@PickMe_Gaming what is the scale value u had when u calibrate optical flow

[@PickMe_Gaming]

@@dronetechnology2772 I get this scale value when I calibrate optical flow
scale value: 4.063