It’s binding somewhere in the track, if the window moves at all, the motor is free and the motors not binding because it would trip the switch and have to be reset each time. It maybe something like debris or part of the rubber gasket is out of line. If the gaskets where the window slides are clear, you’ll need to pull the trim panel off to see where it’s blocked. Best of luck
This is going on with me too. Have a 2016 4Runner. The dealership wanted over $2,000 to replace the regulator and motor. That's ridiculous. Im going to grease it up and get it. Hopefully I'll start moving freely afterwards.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
after a tint install my back window now doesn't go down. Hoping a wire harness is just unplugged.
This is what was wrong with mine I tried the break trick with no luck but did notice how sticky the gears were.
We enjoyed, thanks
My window went down and won’t come back up, it tries to but it’ll only come up about two inches and then it’ll go back down
It’s binding somewhere in the track, if the window moves at all, the motor is free and the motors not binding because it would trip the switch and have to be reset each time. It maybe something like debris or part of the rubber gasket is out of line. If the gaskets where the window slides are clear, you’ll need to pull the trim panel off to see where it’s blocked. Best of luck
This is going on with me too. Have a 2016 4Runner. The dealership wanted over $2,000 to replace the regulator and motor. That's ridiculous. Im going to grease it up and get it. Hopefully I'll start moving freely afterwards.
Did this fix your issue?
Yes, once I freed the motor up it’s worked like a champ since.
it’s a t25 not t45