Great job!!! Thanks so much!!! I have a 65 inch and I was thinking about this one but I don’t want mine to overlap…. So thanks so much for the attention to detail in the explanation 👍🏽👍🏽👍🏽👍🏽👍🏽 God bless!! I’m here on Thanksgiving 2021 🍁🍁🍁
For those wondering, this stand is 50" wide. A 58" Samsung is 51" wide. You can mount up to a 55" Samsung without overlap. This is the best stand you can buy for $149.
does anyone know where I would get a replacement for the wall mount? all the wall mounts online are only for well... walls. cannot find any that wrap around the pole of the tv stand... I really need one
I just got this a few days ago and when I tried setting up the middle part one of the screws wouldn't go in all the way even though it was the right one
Can you tell me how to fix tv position up to down and down to up. My daughter changed the position. My tv is all the way down . I don’t know how to fix it
Thank you for this video! Very informative. I know this was posted couple months ago but if you see this.. Do you know the true dimensions? I plan to buy this but I want to make sure the height is tall enough and the width is wide enough for my needs.
I have no clue if you will respond but did you have to put in the black fittings inside the tv? Or no? Because I have my 65” but the spacers that’s supposed to go inside out to big so wondering if you used them or just screwed in the bolt that fits
I'm having issues with screwing in the bottom part of the bracket pieces LR&LL on the back of my 50 inch tv. Are the spacers supposed to fit into the hole? The spacers I received don't fit into the hole.
Just finished assembling mine. It’s a really sturdy stand. I was really skeptical of how it would hold my 65” but it worked out well. Had a bit of trouble setting up the mounts to the tv since there aren’t really any videos specifying on how to do it plus the instructions aren’t really clear for that part. Overall it’s a really nice stand. Very satisfied. Just hope I assembled and mounted it correctly. Hopefully there aren’t any complications in the near future 😅
How did you get the spine to stand up straight & not leaning? Mine spine arrived yesterday & was confused why it was leaning forward & the bottom part is tight.
@@RealestKhalil just make sure everything is facing in the right direction, when I thought I had finished assembling mine I double checked everything and I still had to take a few things apart to make them face how they were supposed to. The spine was straight and sturdy when it was assembled I didn’t have any problems with it, if it is leaning im not sure why but like I said just double check everything and also make sure you add and tighten the hardware exactly how it is supposed to.
@@RealestKhalil hey man did you find a solution to the leaning part just set mine up and having the same problem I have a 65 inch tv too and I’m having the leaning problem of the tv as well
Ok needed to see how much gap the tv was from the glass.. I have this stand but got a larger tv. I'll have to find a workaround. Like the stand too much to get another one
The television looks pretty close to the top shelf... Is it possible to raise the TV even higher than that? I would assume a 65-70" TV would be larger in height
yeah there are 4 mounting options for the height of the television, it looks like he has his on the lowest setting. I have my 55 inch on the second lowest setting and it fits a center channel speaker underneath it without issue. Source: I just set up mine.
I recently bought this same stand last Saturday but in the "ash wood" finish it's a beast and sexy sleek and elegant in my place. surprising how light it is to move it around with ease. I didn't have exact screw driver you used in this video took me a 2 hours and 20 minutes alone to assemble it
@@DarthVader964 there not difficult to pop em onto the slots press and hold each one until slide into shelf frame. It’s a bit of a workout popping them onto each shelf for placing each glass shelf
@@PassportBrosBusinessClass any way you can confirm i can mount a 200 x 200 vesa standard? I'm worried there is not enough gap to mount the TV center. About 6.5 inches between mounting bars
The instructions say that if you have difficulty installing the suction cups to use the provided hex wrench. That took a long time. I used the side of a wrench to pressure the suction cups through the metal shelves. That worked super fast!!!
I had to use one of the smallest screw drivers in my tool set to help guide the lip of the suction cup in....worked like a charm! I used the 2.5x40mm screw driver.
@@PassportBrosBusinessClass maybe but the overlapping really isn’t an issue at all the tv sits pretty far back on the stand so it almost looks mounted to the wall so the overlap isn’t really an issue the issue is the sturdiness of a stand that’s the only thing that needs to be looked at first wich this stand is very sturdy
@@DarthVader964 some of them were easy but some were a pain but i got out a little screwdriver and kinda went around the part you push in the hole and pushed them in and worked just fine
I had my 55 in on it but upgraded to a 65 in,so I excited and scared to put it on there 🤣🤣 but why did you skip the part the part where you put the bracket on the tv?
Hello I just watched your video, very informative. Even though I'm buying a 75 inch TV I think this will for the bill. The legs are only 25.9 inches apart. And it only weighs 79 pounds. I know it will overlap the sides but I'm ok with that. What do you think?
@@PassportBrosBusinessClass Thanks for the reply. I would be ok with the overhang. How easy or hard was it to put together? I am not the best at building stuff but it looked somewhat easy to install. Thanks again for the reply.
We had this same design and one night at 3 AM we heard a sound like a cinder block dropped from 10 feet to the hardwood floor. When we looked, it was our LCD TV 36" laying face down onto the hardwood floor. The top glass shelf did not crack or break, but the metal brackets and sections gave way. It's not repairable, I tried, so we decided no more glass TV stands and no more TV stand type device for more than $150-$199.99. YMMV
How much did your tv weight? Im thinking about getting one these for my 55 tv but it weights 60 lbs im afraid in the long run the glass will break or the tube holding all weight will break the glass from all the pressure
FORGOT TO ADD: Even during/after the shelf collapse, not a single piece of glass from any shelf broke. I found that to be impossible, but it was true. The metal parts failed.
Great job!!! Thanks so much!!! I have a 65 inch and I was thinking about this one but I don’t want mine to overlap…. So thanks so much for the attention to detail in the explanation 👍🏽👍🏽👍🏽👍🏽👍🏽 God bless!! I’m here on Thanksgiving 2021 🍁🍁🍁
Would a 60” TV be the perfect edge to edge fit? Or is the 55” the perfect fit to not overlap?
will this fit with a 32 inch tv? before i go out and buy a bigger tv just for this stand i want to make sure if i can just keep my 32 inch.
Kinda nervous to let it lean forward without it being attached to a wall, I have a 65 in, any suggestions?
What screw did u use to mount the tv
Mine came but the middle shelf don't fit bolts properly did you have this issue? I had to buy a drill to make them fit..
Good evening Sir....Do you have any video showing where you attached the two wooden end to the metal frame?
But how would you take off the angle bars if you want to change out your TV? Please help ?
Does it lift the TV up and down?
For those wondering, this stand is 50" wide. A 58" Samsung is 51" wide. You can mount up to a 55" Samsung without overlap. This is the best stand you can buy for $149.
Can this hold a 60 lbs tv with the tv mount?
does anyone know where I would get a replacement for the wall mount? all the wall mounts online are only for well... walls. cannot find any that wrap around the pole of the tv stand... I really need one
I just got this a few days ago and when I tried setting up the middle part one of the screws wouldn't go in all the way even though it was the right one
Can you put a gaming monitor aoc 34 in g2 series on that mount?
Mine won’t tilt! How did you get yours to TILT? Mine will swivel but won’t tilt. Even when I loosen the twist knobs. Won’t tilt
What do we do if we don’t have the washers
Does this work on a 43 inch tv
Thanks for an honest and straightforward review! Going to buy this for my 55' Samsung
Good morning how do you get the bar to line up
How many inch tv you put on?? Is fit good
I had to remove tv because I moved. How do I put it back on.
Hi do you think he can hold 70 inch TV?
2:08 good to know, because I wasn't sure if my particular tv would fit on that so incase it doesn't I'll just not use that.
I just received mine today. Thank you much for the video, awesome job!!!!!!!!!!!
How did you get the suction cups on? They're terribly hard to put in. I put in some with a lighter but it's not working well
@@DarthVader964 I know it's probably too late now, but I saw someone using a little bit of soap to slide them in easier
I have a 65" I just purchased this tv stand! Only problem is! It's still in the box 😆 wish I could just pay to set it up lol
Lol same
I know this is 2 years later but we’re you able to get it mounted. I’m having that same issue now
What size bolts did you use for the brackets at the back of the tv? I’m having trouble mounting mine in the spine
Everything I used came in the package. I think I tested 2 sets till I came up with the right size.
I have the same model assembled myself struggling with a tilt issue tv falls forward …
My tv keeps leaning forward which I don’t like. Any help?
Mounted my 70” and it hangs over maybe 2” each side and very sturdy! 70” fits great listen to the manufacturer
What size is your tv
What are the measurements?
Can you tell me how to fix tv position up to down and down to up. My daughter changed the position. My tv is all the way down . I don’t know how to fix it
My problem is HOW to get the bottom screw in the brackets on TV. The hook covers the bottom hole for screw.Help!!!
Thank you for this video! Very informative. I know this was posted couple months ago but if you see this.. Do you know the true dimensions? I plan to buy this but I want to make sure the height is tall enough and the width is wide enough for my needs.
The only part I'm struggling with is mounting the bracket to the TV helllppp
I have no clue if you will respond but did you have to put in the black fittings inside the tv? Or no? Because I have my 65” but the spacers that’s supposed to go inside out to big so wondering if you used them or just screwed in the bolt that fits
Different TV have different fitting requirements.
Do you know what VESA Mounting patters this stand supports?
I have no idea which screw to use to place on the back my TV to mount to the stand. Confused is not even the word lol
I'm having issues with screwing in the bottom part of the bracket pieces LR&LL on the back of my 50 inch tv. Are the spacers supposed to fit into the hole? The spacers I received don't fit into the hole.
I’m super late to the party, but did you ever figure this out? Having the same issue right now.
What did u use to screw the monitor brackets on
Brandon Cox
I think I just used my torque screwdriver
how do you tilt the tv forward? my stand isn’t tilting
loosen the tilt lever.
How did you put the suction cups in on the bars? It's literally impossible without melting the suction cups with a lighter
I pinched em. Didn't have a problem.
Did you use a restraint strap on tv? To prevent tip over? I don’t feel like using mine
The TV, as you can see sits away from the wall. a Restraint isn't necessary and we've had NO issues.
Does anyone know if you can remove middle shelf I need more room
No
Is the spine supposed to lean forward? I don’t know 🤷🏾♀️ if mine is put together correctly bc the spine leans forward a bit.
No
How did you guys figure out what size screws to use for the brackets?
trial and error
Just finished assembling mine. It’s a really sturdy stand. I was really skeptical of how it would hold my 65” but it worked out well. Had a bit of trouble setting up the mounts to the tv since there aren’t really any videos specifying on how to do it plus the instructions aren’t really clear for that part. Overall it’s a really nice stand. Very satisfied. Just hope I assembled and mounted it correctly. Hopefully there aren’t any complications in the near future 😅
How did you get the spine to stand up straight & not leaning? Mine spine arrived yesterday & was confused why it was leaning forward & the bottom part is tight.
@@RealestKhalil just make sure everything is facing in the right direction, when I thought I had finished assembling mine I double checked everything and I still had to take a few things apart to make them face how they were supposed to. The spine was straight and sturdy when it was assembled I didn’t have any problems with it, if it is leaning im not sure why but like I said just double check everything and also make sure you add and tighten the hardware exactly how it is supposed to.
@@XxJuNiOrxX714 wish I could take a pic & post it on here
@@RealestKhalil hey man did you find a solution to the leaning part just set mine up and having the same problem I have a 65 inch tv too and I’m having the leaning problem of the tv as well
@@ronaldhernandez6065 I’m having this same issue I had to redo it just in case I did something wrong but the spine still leaned forward
My middle glass won’t sit on suction
Can you move and swivel the tv with the built in stand?
You can change the TV angle by untightening bolts.
U can adjusted the shelfs
Does this set up tilt from left to right?
yes
Thanks for doing this!
Getting mine on monday, can't wait to get it!
Thankyou you are a big help.
Do you know if this can support a 65in Curve TV??
The instructions say that it can. Slightly different bracketing procedures though.
Good on you getting it set up
Mines was just not working. The middle shelf was way off. Had to return. :(
That was because which of the 3 holes you use depends on which height of the middle shelf you chose to place it.
Ok needed to see how much gap the tv was from the glass.. I have this stand but got a larger tv. I'll have to find a workaround. Like the stand too much to get another one
Thanks I was lost tell I seen this got it all ❤ together
The television looks pretty close to the top shelf... Is it possible to raise the TV even higher than that? I would assume a 65-70" TV would be larger in height
yeah there are 4 mounting options for the height of the television, it looks like he has his on the lowest setting. I have my 55 inch on the second lowest setting and it fits a center channel speaker underneath it without issue.
Source: I just set up mine.
where can i get the brackets i be tryin to find them for so long
They're in a box within the box. My swivel joint was taped to the outside of the box.
Think u sir just got my today it looks awesome can wait to get together for my 58 in tv
How do I get the actual tv onto the spine? I have everything put together but still having trouble figuring out how to place the tv
Nevermind figured it out! Thanks. I had the plate on backwards lol
Hello,
My tv keeps tilting. Any suggestions?
Tighten the swivel
Great video! In inches what is the highet for each of the two interior shelves?
How long did it take to get it fully set up?
1 hour
I brought mine yesterday for some reason the spine part keeps leaning forward I dont know you gotten it to stand up straight
That shouldn't happen. Are you sure you tightened it correctly?
@@PassportBrosBusinessClass I'm pretty sure I did I spent all day yesterday trying to make the spine straight only thing it does just leans forward.
Oh so it’s not just mines that does that.
Ended up just taking it apart and requested a refund and return.
Have you seen the side tables for the side?
They make a shelf. I haven’t seen side tables
What kind of screwdriver do I need? A particular size?
A standard Phillips, Flat, Hex screwdriver is enough
Can this hold a 65inch qled Samsung tv?
Yes
Thank you very much!!
Great video!
I recently bought this same stand last Saturday but in the "ash wood" finish it's a beast and sexy sleek and elegant in my place. surprising how light it is to move it around with ease. I didn't have exact screw driver you used in this video took me a 2 hours and 20 minutes alone to assemble it
How did you get the suction cups on? They're terribly hard to put in. I put in some with a lighter but it's not working well
@@DarthVader964 there not difficult to pop em onto the slots press and hold each one until slide into shelf frame. It’s a bit of a workout popping them onto each shelf for placing each glass shelf
Please can you help how to hang it up
@@shahedimawal9365 floating spine mount?
Yes sir
What Vesa standards does this stand work with? I can't find this info anywhere.
It’s pretty much universal.
@@PassportBrosBusinessClass any way you can confirm i can mount a 200 x 200 vesa standard? I'm worried there is not enough gap to mount the TV center.
About 6.5 inches between mounting bars
Mines didn’t come with mount how can buy the mount
How can I buy the Bracket
Can
Wires go thru the neck of the stand to hide the wires in cable management
yes
I showed you
Awesome !!!! Thank you
I am planning to move, can we remove those glasses from the rack?
Yes
I can’t get the suction cups into the holes for the shelves...any tips pls??
Push them with thumb force
Forehead sweat on the part that goes in the hole! Bam! They go right in.
The screws are the short for my 55 inch
I have this exact tv stand you can adjust the tv stand too extend too come out some more I have a 65 inch tv
Mine is tipping over and we have a 65 inch
thanks.
It says it swivels.. didn’t see that :(
What size of tv is that
55”
Good vid, thank you
The instructions say that if you have difficulty installing the suction cups to use the provided hex wrench. That took a long time. I used the side of a wrench to pressure the suction cups through the metal shelves. That worked super fast!!!
After struggling putting 1/2 of them in, I used my forehead sweat on the suction cup nubbings & they just popped in after that! 😆 Works great!
I had to use one of the smallest screw drivers in my tool set to help guide the lip of the suction cup in....worked like a charm! I used the 2.5x40mm screw driver.
LOVED this review!! thank you!!
Is there anyway to adjust the height?
yes, 4 height mounting options for the tv height
@@dbssanchez11 Thank you, I figured it out..I had to lower the brackets that was attached to the back of the tv..
Hey I’m having issues with my 70 in the spine is not catching the weight of my tv it continues to lean please help
As I stated, I don't recommend 70" TV on this model. In fact, your TV probably exceeds the weight limit.
I just bought this for my 70 did you get it to work or do I need to take this back?
This was absolutely handy
How high can you mount the tv?
as high as the spine goes
Bigtruckseriesreview Motorsports and how high is the spine
I have the same tv stand. But I lost the spine bolts to mount on on the spine. 😭
Hardware store
I have a 65 inch on it an it does overlap a little but still looks amazing
Because of the black bezels, it’s acceptable I think.
@@PassportBrosBusinessClass maybe but the overlapping really isn’t an issue at all the tv sits pretty far back on the stand so it almost looks mounted to the wall so the overlap isn’t really an issue the issue is the sturdiness of a stand that’s the only thing that needs to be looked at first wich this stand is very sturdy
How did you get the suction cups on? They're terribly hard to put in. I put in some with a lighter but it's not working well
@@DarthVader964 some of them were easy but some were a pain but i got out a little screwdriver and kinda went around the part you push in the hole and pushed them in and worked just fine
Will it hold a 40 inch
40 Inches looks lame. GET at least 55".
My dude sounds like Keith Lee from WWE! Lol but good stuff bro..imma set mine up tonight
Bask in his glory!
Yo he kinde does
Went out n got the same exact one
I had my 55 in on it but upgraded to a 65 in,so I excited and scared to put it on there 🤣🤣 but why did you skip the part the part where you put the bracket on the tv?
Did you mount it on the wall or stand?
I bought a 50 inch 4k Vizio Smart Cast tv at Walmart and the only tv stands they have is this one.
Hello I just watched your video, very informative. Even though I'm buying a 75 inch TV I think this will for the bill. The legs are only 25.9 inches apart. And it only weighs 79 pounds. I know it will overlap the sides but I'm ok with that. What do you think?
I don’t want too much overlap
@@PassportBrosBusinessClass Thanks for the reply. I would be ok with the overhang. How easy or hard was it to put together? I am not the best at building stuff but it looked somewhat easy to install. Thanks again for the reply.
@@PassportBrosBusinessClass Whalen is a good tv stand for 65 inch tv or 50 inch TVs or 55 inch TVs I have two 65 inch TVs
I just got a 75 inch tv but im having an issue with the tv tilting forward, is it to heavy? Did you have this issue
@@lalow8949 no, i did not have an issue with the TV leaning forward. What TV is this?
Wait, so this doesn’t have to be mounted on the wall?
no
Nope..3 in 1
Mine is mounted on post in middle and it swivels..sturdy all round..very pleased
Y is my tv tilted
We had this same design and one night at 3 AM we heard a sound like a cinder block dropped from 10 feet to the hardwood floor. When we looked, it was our LCD TV 36" laying face down onto the hardwood floor. The top glass shelf did not crack or break, but the metal brackets and sections gave way. It's not repairable, I tried, so we decided no more glass TV stands and no more TV stand type device for more than $150-$199.99. YMMV
You must’ve made some kind of mistake building it. My mothers stand is still going strong since I made this video building it.
How much did your tv weight? Im thinking about getting one these for my 55 tv but it weights 60 lbs im afraid in the long run the glass will break or the tube holding all weight will break the glass from all the pressure
@@kingeleven3820 Mine weighed 23 pounds.
FORGOT TO ADD: Even during/after the shelf collapse, not a single piece of glass from any shelf broke. I found that to be impossible, but it was true. The metal parts failed.