Sir in T3, we can only use smaller pole as if place the plank on top same as you did, but instead of tying rope on bigger pole we can tie one end to left end of balli and place balli as 90(horizontal to ground) with the pole just ahead of balli. Tie other end of rope over the plank to the other end of balli. Tie very hard all stuff and the pole will not allow the balli to move back and so not allow plank to lift from backwards. And so will be a stable solution
Hi bhaiya I got one idea for 3rd one You can make a loop in the shape of 8 between 2 poles and use center part as the base for the plank however a bit risky as the ropes to be tied tight
in the last task i have an idea > as we are given two poles one balli and patta and rassi so 1. tie the balli in the bigger pole horizontally tightly from the inner side 2. now put the plank on the small pole and the plank one end below the balli which we have tied earlier hope this is good idea for it because as you explained in the video and the idea given is difficult to tie the plank to that pole
It's workable, but there is no significant use of balli, like we are using the same plan as before but only using additional balli which have no significance and it makes a simple idea more complex
Sir in the very last structure, we can use the smaller pole as the base for the plank and the balli can be used to press the plank when a person will move over it. What I mean is that the balli will be kept parallel to the bigger pole and put perpendicular on the plank like this ' I_____' one person or two people can press the balli firmly when one perspn is crossing over the plank.
Sir in T3, we can only use smaller pole as if place the plank on top same as you did, but instead of tying rope on bigger pole we can tie one end to left end of balli and place balli as 90(horizontal to ground) with the pole just ahead of balli. Tie other end of rope over the plank to the other end of balli. Tie very hard all stuff and the pole will not allow the balli to move back and so not allow plank to lift from backwards. And so will be a stable solution
awesome and lucid please make more videos
Wow very helpful sir 🫡 go ahead you are doing fantastic work ❤️
This software is so good! Please make more videos it has really helped me in understanding 🙏
which software is this?
Hi bhaiya
I got one idea for 3rd one
You can make a loop in the shape of 8 between 2 poles and use center part as the base for the plank however a bit risky as the ropes to be tied tight
Great idea brother
But placing the rear end of the plank under the cross junction of the rope will make the rope slide up on the rear pole.
T3 me Balli ko neeche diagonally bhi laga sakte hai, for added support...
Great effort 👍
Pl come with more videos
Please make more video on defferent defferent ssb task
awesome bro keep doing it
You done a good job
In 2 structure put plank under l projection and put plank on the top side of l projection
in the last task i have an idea >
as we are given two poles one balli and patta and rassi
so
1. tie the balli in the bigger pole horizontally tightly from the inner side
2. now put the plank on the small pole and the plank one end below the balli which we have tied earlier
hope this is good idea for it because as you explained in the video and the idea given is difficult to tie the plank to that pole
may not be stable!
It's workable, but there is no significant use of balli, like we are using the same plan as before but only using additional balli which have no significance and it makes a simple idea more complex
Sir please upload such videos on movable structures also...
Brother abhi sir Navy main hai ❤
Please come with more videos
Please upload more videos
Awesome bhai
Pls upload more videos
You made really grt thing
U r doing so well, then why quit?
Please upload more sir it's helpful
Brother abhi sir Navy main hai ❤
Or banao bhai
Add more videos
Hello sir command task ke liye bhi video bana doo
Love ❤❤❤❤❤❤
Sir third structure mai Bali or rassi k sath T shape bnaa skte hai jo plank ko stable rkhe ga upr sa
Brother abhi wo Navy main hai ❤
Sir in the very last structure, we can use the smaller pole as the base for the plank and the balli can be used to press the plank when a person will move over it. What I mean is that the balli will be kept parallel to the bigger pole and put perpendicular on the plank like this ' I_____' one person or two people can press the balli firmly when one perspn is crossing over the plank.
Brother abhi sir Navy main hai ❤
@@GTOtasks3d please convey my best regards to sir. This video helped me a lot in my recent SSB and even I got recommended recently for Army.
@@akshanshkhokhar2272 Did you take any coaching?
Are bhai aur bhi video daalo please
Brother abhi sir Navy main hai ❤
Very helpful
Brother abhi sir Navy main hai ❤
Please bring more videosssss
Brother abhi sir Navy main hai ❤
bhaaai ji aur video upload karo aise hi please
Bhai please layiye aise 3d models very very helpful
Bhai aise 3 d models aur kaha mil sakte hai?
Brother abhi sir Navy main hai ❤
Bhai ji, plz upload more video like this
@@GTOtasks3d aagye navy se k nahi?
Kya bawaaal chiz banai hai bhai 🎉
3rd wale mein 2 idea hai