@@thewrenchinglounge update! Installed mine earlier this week. Your instructions definitely filled in the gaps where the kit instructions left room for interpretation. Once again, I can’t thank you enough for this upload.
Hey, just found you and your channel. Love the content, super helpful. Has any one ever told you that you sound just like Brian Windhorst😂😂 not a bad thing lol
Glad you liked it. The exhaust is just a pieced together deal with flowmasters under the car and 12" bullet resonators toward the back. I've got a new 3" exhaust going on in a future video.
hi there. i just bought this exact same kit and was wondering what wire did you cut from the harness? mine didnt come with no instructions nor programing steps.
I bought it of ebay. Here's a link but please make sure it's the right fit for your year and model. www.ebay.com/itm/184715074638?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=gBTj4TBzTmm&sssrc=2047675&ssuid=drVB3EUrRQ-&widget_ver=artemis&media=COPY
For me the purple wire spliced into the Pink/DkGreen wire in the ignition harness and the White/Yellow wire spliced into the Violet/Brown in the same harness. But make sure you look through the install instruction on Flashlogic's website for your specific car.
I bought PCM from flagship it's been giving hell it's stalling it's my 2 one from them , you know we're I can get a good PCM? I'm also going to do rear polyurethane arm bushings.
For the most part. It uses a harness that gets plugged inline with 1 ignition plug. The only part that doesn't make it a 100% plug and play module are the 2 wires you have to splice into the 2nd ignition harness.
I'm not sure. I know an OEM remote start will not work if you have a check engine light. I don't know if the flashlogic looks for a check engine light.
Hey man so when you go to connect the purple and yellow and white wires to the first harness which other wires do you connect them to ? Or where do they go put ?
man this video helped out alot i used mpc not flashlogic and it installed the exact same way ive also noticed the speed of button push doesn't really matter as much on the mpc Thank you also for the radio tip it really helped
I bought it of ebay. Here's a link but please make sure it's the right fit for your year and model. www.ebay.com/itm/184715074638?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=gBTj4TBzTmm&sssrc=2047675&ssuid=drVB3EUrRQ-&widget_ver=artemis&media=COPY
I bought it of ebay. Here's a link but please make sure it's the right fit for your year and model. www.ebay.com/itm/184715074638?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=gBTj4TBzTmm&sssrc=2047675&ssuid=drVB3EUrRQ-&widget_ver=artemis&media=COPY
1:01 good to see you back 👏
My man!!! Thank you for the upload. I have had this kit sitting in my garage for two years now LOL.
Glad I could help!
@@thewrenchinglounge most definitely! As soon as I get a warmer weekend I’ll definitely be installing mine.
@@thewrenchinglounge update! Installed mine earlier this week. Your instructions definitely filled in the gaps where the kit instructions left room for interpretation. Once again, I can’t thank you enough for this upload.
Hell yea!!!!! This is going to be my year on youtube. I have so many parts and projects planned for the car. Stay tuned!!!!
@@thewrenchinglounge can’t wait!!!
Thanks dude grabbing one for my 05 and 06.
Did you?
👀 fr trynna find out thinking bout doing to my 05
@@300BLACKOUT5.7it works i just installed the mpc version on my 05
@@300BLACKOUT5.7did it work silver 05 here
Liked the video I subscribed love helpful videos like a normal person
Hey, just found you and your channel. Love the content, super helpful. Has any one ever told you that you sound just like Brian Windhorst😂😂 not a bad thing lol
Thanks for that video. That exhaust sounds sweet. What kind of catback is that? Stock?
Glad you liked it. The exhaust is just a pieced together deal with flowmasters under the car and 12" bullet resonators toward the back. I've got a new 3" exhaust going on in a future video.
hi there. i just bought this exact same kit and was wondering what wire did you cut from the harness? mine didnt come with no instructions nor programing steps.
Good job
been wanting remote start on my 05 C. do you happen to have the link to this kit?
I bought it of ebay. Here's a link but please make sure it's the right fit for your year and model.
www.ebay.com/itm/184715074638?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=gBTj4TBzTmm&sssrc=2047675&ssuid=drVB3EUrRQ-&widget_ver=artemis&media=COPY
@@thewrenchinglounge i sure hope that the one i oredered will work as well. i got a different one. same company just looks different i guess.
Hey I was wondering what wires did you wire up the purple and white and yellow wire to on the harness of the first plug ?
For me the purple wire spliced into the Pink/DkGreen wire in the ignition harness and the White/Yellow wire spliced into the Violet/Brown in the same harness. But make sure you look through the install instruction on Flashlogic's website for your specific car.
@@thewrenchinglounge thank you for the reply very appreciated 🙏
Did you have to use the weblink cable as well?
Nope, When I purchased it the seller asked for the make and model of the car and pre-programmed it for me.
@@thewrenchinglounge Mann that’s nice of them, I got mine installed and have to wait for the dang cable
I bought PCM from flagship it's been giving hell it's stalling it's my 2 one from them , you know we're I can get a good PCM? I'm also going to do rear polyurethane arm bushings.
I can't help you with the PCM question. Sorry :(
Flagship has a lifetime warranty send it back I just ordered one from them waiting for it to get here now
Flashmasters from ohio
Dealership only warranties for 1 year big money
Is it completely plug & play?
Which model is your car?
For the most part. It uses a harness that gets plugged inline with 1 ignition plug. The only part that doesn't make it a 100% plug and play module are the 2 wires you have to splice into the 2nd ignition harness.
And I installed it on my 2007 Chrysler 300c SRT8
@@thewrenchinglounge Thank you so much for your reply 🫶🏼.
will it still work if you have check engine light?
I'm not sure. I know an OEM remote start will not work if you have a check engine light. I don't know if the flashlogic looks for a check engine light.
Was it the yellow and white wire that you clipped?
Yep the white/yellow wire (next to the white/gray wire) coming off the VS2 plug.
Hey man so when you go to connect the purple and yellow and white wires to the first harness which other wires do you connect them to ? Or where do they go put ?
where did u get the metal srt8 pedals at??
They were on the car when I bought it 10 years ago.
man this video helped out alot i used mpc not flashlogic and it installed the exact same way ive also noticed the speed of button push doesn't really matter as much on the mpc Thank you also for the radio tip it really helped
Glad it helped
Link to where to buy it at ? Thanks
I bought it of ebay. Here's a link but please make sure it's the right fit for your year and model.
www.ebay.com/itm/184715074638?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=gBTj4TBzTmm&sssrc=2047675&ssuid=drVB3EUrRQ-&widget_ver=artemis&media=COPY
Where can I buy the kit for the remote start can somebody share the link
I bought it of ebay. Here's a link but please make sure it's the right fit for your year and model.
www.ebay.com/itm/184715074638?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=gBTj4TBzTmm&sssrc=2047675&ssuid=drVB3EUrRQ-&widget_ver=artemis&media=COPY
Wonder if trunk/hatch release works in Magnums.
Hey man any tips for break dust on my 06rt no brembo breaks
Hey, where did you get those SRT8 pedel covers from?
They were on the car when I bought it 8 years ago.
2005 dodge magnum
How can I put that in my car Sir
He just showed you
It would have been easier just to take the ignition cylinder out its 1 less screw lol
Interesting..... I didn't see this screw. If I have the lower dash apart again I'll take a closer look.
Does this make the car easier to steal for these dumb criminals out there? I want this but don't want to make it any easier for them.
I don't believe so.