Finally I’ve found the channel I need, I am going to build a PBR to produce Bio Mass to use in a Methane Ingester( aka Digester), to add to the kitchen/Gardn etc plant scraps. My aim is to make enough Bio Gas to fuel a Camper van type Cooker, I was thinking of setting up a Passive Solar Panel in my Window, to use the heat to help the Fermentation, by running a Pipe around the Ingester to transfer the heat. Then I thought why not combine the PBR with the Passive Solar Panel, by using a Flat PBR panel and pass the Solar heat collector pipes through the PBR panel. So I can use the same window for both heating water and growing Algae Bio Mass. soz bit of a rant, been researching Algae Carbon Sequestration, and Bio Gas for last 3-4 years, and am excited about its potential. 🌎✊🏽🌻
Thank you very much Scotty, it was very educative to understand how the system works and what are the components in the basic system but I do have one question related to microalgae biomass production, let's say that we have a water tank of 1m³ which I believe makes 1000 liters of water we put algea into water with the air pump and other components such as solar panel and sensors, in this water tank how long algaes can survive and how can we clear the biomass or transfer the biomass from the tank to somewhere else? I'm waiting for your feedbacks! My very best regards and thank you again for the video!
Placing all the data in a data base and print it out would be the simplest way I think and maybe an algorithm to find the best combination of elements.
Is it possible to commercialize this? You could be a very rich man if you are able to do that and more importantly you could better the world and take in enormous amounts of co2!
not a lid but it will be sealed to run up into sensors and then be able to vent to atmosphere, probably with some sort of one way valve to make sure its all going one way, and not outside interreference effecting the readings
Thankyou for Subbing, make sure to watch the playlist, I will go through videos on ways to make your own, I wouldn't suggest making this unit as it is based of testing and data needs which you probably wont need.
I have, if you see my community post about the videos I was creating for recording the data ect. As much as I would love to just have the algae growing straight away it won’t show much if I don’t have the proper equipment in place to record data. From that list I’m about a couple videos away from next steps build.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Finally I’ve found the channel I need, I am going to build a PBR to produce Bio Mass to use in a Methane Ingester( aka Digester), to add to the kitchen/Gardn etc plant scraps. My aim is to make enough Bio Gas to fuel a Camper van type Cooker, I was thinking of setting up a Passive Solar Panel in my Window, to use the heat to help the Fermentation, by running a Pipe around the Ingester to transfer the heat. Then I thought why not combine the PBR with the Passive Solar Panel, by using a Flat PBR panel and pass the Solar heat collector pipes through the PBR panel. So I can use the same window for both heating water and growing Algae Bio Mass. soz bit of a rant, been researching Algae Carbon Sequestration, and Bio Gas for last 3-4 years, and am excited about its potential. 🌎✊🏽🌻
Nice job Scotty! Fingers crossed it all works :)
Thanks. We will have to wait and see :)
subbed
this is exactly what I wanted to do
Best of luck
Thanks for subbing, still getting part together, everything is a bit slow at the moment but it will happen
Wow I didn't know this even existed. Very informative video 👍 subbed
Thanks, hopefully it all goes to plan
Thank you very much Scotty, it was very educative to understand how the system works and what are the components in the basic system but I do have one question related to microalgae biomass production, let's say that we have a water tank of 1m³ which I believe makes 1000 liters of water we put algea into water with the air pump and other components such as solar panel and sensors, in this water tank how long algaes can survive and how can we clear the biomass or transfer the biomass from the tank to somewhere else?
I'm waiting for your feedbacks!
My very best regards and thank you again for the video!
Could we put these things in Catalytic converters and have the algae soak up the CO2?
Can you please give more description about how to measure the amount of oxygen and the sensors used and there mounting
Very interesting project! Look forward to seeing more content.
Where can we get this algae
Placing all the data in a data base and print it out would be the simplest way I think and maybe an algorithm to find the best combination of elements.
Hi Sir
Can you tell us .
What algae do they use.
I am from India 🇮🇳
I will be testing different types so I will update with the best type
@@ScottyDIY Thankyou Sir
Is it possible to commercialize this? You could be a very rich man if you are able to do that and more importantly you could better the world and take in enormous amounts of co2!
Waiting for the results ... Good luck 🤞
are you going to put a lid on the containers?
not a lid but it will be sealed to run up into sensors and then be able to vent to atmosphere, probably with some sort of one way valve to make sure its all going one way, and not outside interreference effecting the readings
How much money it can take to make this.
Not sure how much it will cost but I will try making one as cheap as possible
I want to save the world using your invention
Good idea bro 😊😊
Thank you sir
No problem, Thanks for watching!
update on this?
Hi, i just posted a community post on an update including the videos on sensors for testing and recording data. More videos coming !
that would get rid of chlorine, but not chloramine. Get an RO filter
very cool, i subscribe !
Thankyou!
Should be installed in coal power plants
So awesome!
Hey man, I'm working on a project similar to this. I'm hoping if you have the time to discuss of potential partnership.
Me too
How to make it
Subbed
Thankyou for Subbing, make sure to watch the playlist, I will go through videos on ways to make your own, I wouldn't suggest making this unit as it is based of testing and data needs which you probably wont need.
You haven't made any more videos regarding this smh would have subbed otherwise
I have, if you see my community post about the videos I was creating for recording the data ect. As much as I would love to just have the algae growing straight away it won’t show much if I don’t have the proper equipment in place to record data. From that list I’m about a couple videos away from next steps build.
you're cute