Be sure to Anchor it to the slab guys. Once concrete is cured anchors need to be installed. A good strong wind storm and the paint booth will be next door.
If you haven't done so; make sure you anchor it down. Also silicone (seal) all around the base to the cement. You don't want rain to build up under it and raise the humidity. I'd also consider a peaked roof so water can't pool up on it too. You could make a large overhang above the fans to help protect them also.
When you silicone gaps, make sure you go back with some winded in a bowl and dip your fingers in it after you wipe the excess from the gaps. You guys have it all globbed on there.
For anyone that does car repairs we all know getting your own paint booth and a space to work on your projects is a dream come true congratulations guys 👏
Paint booth is looking great - Would be a major benefit to the back and forth from the main building to build another room off the rear for a paint store/ mixing room. - Paint the ramps underneath, looks like bare steel, and won't be long before the rusty water starts to spread over the concrete. -Paint a roof sealer on the outside of the roof, protect the longevity of the Silicon sealer and assist with leak protection
Congrats on having your own paint booth. It's absolutely incredible how far you've come over the past few years. I started watching you before you had the garage at your Mom & Dad's house. You would set up a canopy over the car you were working on to stay out of the sun. Excited to see where your continued hard work and dedication takes you going forward.
Probably the happiest and most excited I’ve seen Eleazar in awhile. You guys got a whole compound going on! Now you can move the frame machine beside the paint booth and have more room inside for the toys!
@@whumphagreed, a building over top is a must. Great investment for the property and for protecting their other investments. Either a nice metal building or if they wanted to “up the ante” they could build something out of brick/block/stone. I’m not sure how things work in TN but If I’m not mistaken having a masonry building on your property increases the value as it’s considered a permanent structure and built to be stronger and more weather proof than wood or metal.
They said they're putting a Carport over it,and some of the slab.Once Simeon's place is done,he'll move a couple rides there.He has a 4-5 car garage there.They Won't be putting the frame machine outside.
So great to see how far you have guys have come and your Pops involved every step of the way. Lost my father this year and its great to see your pops so happy to always be helping you guys. Been a fan since the corvette under the tent in the driveway
Guys the paint booth needs to be in a building, they are not meant to exposed to the elements, not to mention it will be literal oven in the summer, the paint will flash before it hits the surface, and in the winter just the opposite, the paint booth y'all used in the past is enclosed for a reason , mainly to have a stable environment to paint, and if you haven't already you may need a small source emissions permit for the paint booth, depending on state environmental laws
@@tnolan3176 Still need to check on that, the fines the DEQ levels for non compliance is in the thousands and they will enforce it, speaking from my position at my facility
Love your channel 2 young men putting in the work nice to see, I am 60 and still love building cars and now I am teaching my son and he loves it we both watch your channel every day , great content great people , pops is a work horse
He said “that sucker was just absolutely salvaged” 🤣🤣🤣🤣🤣🤣🤣 I started dying laughing I was waiting to see what y’all said about it and that was funny asf
So amazing seeing you guys finally getting your own paint booth, now you’ll always have a clean and readily available booth. Looking at what seems to a fair amount of rust on that whole motor housing and motor shafts I’m hoping you got a decent price. Very happy for you guys! 👍👏
Guys I am just in absolute awe of what you guys can do!! You built homes, very complicated cars, your workshop and now a paintbooth!! Truly high 5s and salutations to you! Amazing!! Have been following you guys in silence since the built of Pop's Dodge truck! Each project is mesmerizingly interesting although admittedly at the beginning of each, not sure if possible but, its always completed! Congrats!!
Look absolutely sick guys!!, you guys have come a long ways from where yall were, keep up the awesome work, can't wait to see this and the Lamborghini finished!!
You know that flat roof is going to be a big problem. No where for rain and snow to run off. That booth was meant to be installed inside a building. You need a canopy over the entire building and fan housing. Maybe even a shell over the whole project. You need some professional advice before it’s too late and more expensive.
THIS building will be the greatest addition to the Goonzquad industrial complex. You guys have done so many amazing things in your short time and it has been well worth it I am sure.
Loving the content I have been enjoying all of your video's. It is awesome to see how happy you guy's are building your own paint both. Great job as always with all your builds. Love your channel and content. ❤
I recommend you coat that shiny roof with "silver RV paint" great protective and cuts down on reflective properties so it doesn't interfere with Aircraft flying over. yes, that is a thing. love the booth. what an upgrade.
@@jpf1978 What does your PPL have to do with common sense, a reflective surface blaring into the sky near or within range of operation airfield should be minimized to not allow glare to interfere with Aircraft in the area, now has been several years sense i read this cation, but it does exist. so, you're saying that reflective glaring object reflected into your vision while flying wouldn't bother you. the risk is low, but still a risk. Also, the paint would help reduce the heat that tin box is going to absorb and weatherproof it. 99% of all paint booths that I've seen installed are in doors. under watertight building.
So proud of y’all I remember when I first started watching when the video is you were on the side of the road with the RV on fire and the guy got mad at you. It’s been a minute but y’all are great. Keep up the good work.
I am so happy for you guys, you all deserve it, your own epic paint booth. Man that Lamborghini Aventador is gonna look freaking sick. Nice job, i hope you do the electrical work as well.
I've seen them outside but generally under a lean-to attached to the main shop. Main reason people don't have them outside is you have to push a bare steel car from the main shop into a paint booth without getting it wet or dusty or contaminated with tree sap and whatever which means you can't transfer a car in humidity, rain or wind.
Let’s go!!! I’ve been watching you guys for a while now, since yall were working from your parents garage. To the house yall remodeled, Now yall have your own paint both! Sheeeesh!
Hope you secure that to the ground/pad. A big storm will pick it up and destroy it. Also, secure the ramps, drive tires could spit those ramps out pulling a car in.
Not sure why you wouldnt take the time to move one light panel to the other side and swap a couple other panels around so the light is distributed evenly across the booth with 4 light panels on each side.
Because they don’t care. It will probably have to come down since I doubt they got a permit for that huge concrete slab messing up all the drainage that the county made them setup.
WHOOOHOOO FIRST COMMENT, LOVE YOU GUYS!! 🎉 Absolutely crazy to think of how far y’all have come to the even crazier builds your working on now! Been supporting y’all for a while now and never disappointed, always quality, living the absolute dream!
Congrats on the new paint booth. I've been watching you guys since the Mustang build. You guys always rock!! I enjoy the content very much. (I'm stationed in Japan, Military, so I cant really get anything from the Goonzquad store, Im not sure if you ship overseas, but I enjoy the content all the same). Keep being awesome!
Soooo happy for you guys!! Just make sure you do get a pro electrician. Great seeing ur dad enjoying food in the Porsche!!! That was awesome!!! Glad you posted! Can't wait for the next 1! Keep up the great work!! Can't wait for an update on the R8. Make sure you always have a good time!! 👍👍👍😊😊😊🙌🙌🙌🙏🏻❤
Wow this is really another great milestone achievement in your continuous build journey. Hard work is paying big dividends and that sure looks like a 1st class paint booth to me. Might need to get someone to bore a hole under your driveway to run the electric cable unless you cut it open from the top. Nice money maker!
As always, a very good video, I hope that everything continues to go very well in the repairs, and the best thing is that they make it entertaining to watch, I send a big greeting to everyone from Chile. ☮️
Will those filter grates support a car ? Also if the air flow in the booth is a down draft the flters in the floor need turned over. The air flow should hit the white side first. Keep up the good content !
Although this may be true, it’s not a good idea to assume the orientation of the filters based on colour, without first consulting the filter media specifications.
My first impression would be the filters shouldn't be under the wheels. Maybe they were supposed to go along the wall and the three sections in the middle would have the flat steel panels.
@@danielmarek4609hat’s exactly where you want it ( near the middle) so when you bag a car it pulls the sheet to the car like a vacuum you don’t want it near the sides as it will make the sheet flap off the job
Congratulations guys well deserved. Now you need to build a paint mixing room, with the paint shaker machine, that always keeps the paint shook up, & sponsored by PPG and Sickens!
Coming along nicely, boys! Do you think it would have been better to have the side door on the other side? It could attach to a little paint-mixing shed. Oh well, it's already assembled! Looks great.
Exhaust Filters are in backwards! Flip them and they will last 4x longer. Own a filter service and supply company that maintains about 50 booths a month
Hope you guys build some kind of shed around the paint booth so it's not exposed to the elements. Doesn't look like it would fare well after a few hard storms.
I said the same thing, how do they control the environment, instead Temps will be through the roof with the Sun beating down on that roof and what about the Winter.
@nitebird500 they order everything from China. Nothing against China. They supply a demand. I just don't know why these boys spend stupid money on a dodgy fibreglass body kit then cheap out on a paint booth that's already started to rust in shipping.
Guys, just getting caught up on your show and hear you reference “silicone” rather than Caulk. Don’t use silicone as it is a fish eye generator and you need to use silicone free caulk. Don’t want to be the bearer of bad new but do not use silicone!!!!!
Maybe you should consider putting a extra room or shed next to it that's flame proof and use it as a paint mix prep room/ compressor room etc. as you'll be having to go back and forth to the main hq and could cause fresh paint to get contaminated. Just a thought goonz
Forgot about the air compressor ,,,good point ! Can just imagine painting in that closed up booth on a day its 100 degrees ,,talk about a sweat box ! All metal building sitting on a concrete slab in direct sunlight ,,,DAMN !!!!!!!!!!!!!
outside not newer used silicone, all bugs and animals eat silicone fast off, normal outside used only acryl seal not silicone seal. acryl have lot better weatherproof and bug proof and stay longtime. silicone not stay long.
Great to see the booth nearly finished guys.But i didn’t notice you bolt the ramps to the booth.I’m guessing you did off camera tho.Looking forward to seeing it complete and fully wired up.That first flick of the “ON” switch should be epic.Keep the videos coming guys.Great viewing
Great progress Guys on the paint booth! I would enclose the paint booth as soon as possible. Maybe putting the frame machine on the right side of the paint booth! It looks like there is enough room. Or you could use that room as a paint prep area! Getting a building built around the paint booth opens up a lot of possibilities!
Wow that is a really nice paint booth no young man art be very proud of themselves they're doing a fabulous job I'm always excited the. Seawater next baile's gonna be and they're paint jobs are looking absolutely professional.
The paint booth looks great. I hope the sealant holds up to the weather. Suggestion...spray the roof with white truck bedliner. It will weatherseal it and it will reflect a lot of the heat from the sun.
Anchor it down good boys! Also, hope you sealed up those screws on the flat area of the roof REALLY well!!! Water always has a way of finding its way in!!! Would hate to see a leak in there!!!
Be sure to Anchor it to the slab guys. Once concrete is cured anchors need to be installed. A good strong wind storm and the paint booth will be next door.
fr
Lol, for sure I know they will take care of that.
I’m sure they haven’t done it because the city will make them take it down without a permit
Let it fall
@@fuckused7735dayum what did they do to you?😭
I don't always want to see indoor paint booths built outdoors, but when i do, i tune in to goonzquad! lol
This blows my mind. How can you build a larger structure around it? You would need to repour a slab, and do the grading. What a shitshow.
If you haven't done so; make sure you anchor it down. Also silicone (seal) all around the base to the cement. You don't want rain to build up under it and raise the humidity. I'd also consider a peaked roof so water can't pool up on it too. You could make a large overhang above the fans to help protect them also.
Carport is coming.
Steel building coming soon 45x45 feet
When you silicone gaps, make sure you go back with some winded in a bowl and dip your fingers in it after you wipe the excess from the gaps. You guys have it all globbed on there.
I dont think this booth is meant to be outside like this ! Plus how are they going to control the heat ?
dam we have a genius on RUclips. who would have ever thought to anchor down a building on a concrete slab
For anyone that does car repairs we all know getting your own paint booth and a space to work on your projects is a dream come true congratulations guys 👏
Great content
You guys should build a small room attached to the paint booth for all of your paint supplies
They should of put the side door on the other side so the room could attach at that point for them to walk through after mixing etc..
Something is in the works there trying to buy a building or a car port to go over top of all of it.
Yup - 80-90%, but never 100%.
this is not meant to be outside lol
I love how pops is just chillin like a villain in that Porsche eating a lettuce burger 😂
? What is pop's name
Thats all that unfinished car is good for now !!
@@frankcrenshaw7343 AKA KING
@@frankcrenshaw7343 His name is Yury
@@frankcrenshaw7343Putin
Paint booth is looking great
- Would be a major benefit to the back and forth from the main building to build another room off the rear for a paint store/ mixing room.
- Paint the ramps underneath, looks like bare steel, and won't be long before the rusty water starts to spread over the concrete.
-Paint a roof sealer on the outside of the roof, protect the longevity of the Silicon sealer and assist with leak protection
They said they were going to build a building to cover the paint booth and part of the slab ! Dont understand why they wouldnt do that first !
Congrats on having your own paint booth. It's absolutely incredible how far you've come over the past few years. I started watching you before you had the garage at your Mom & Dad's house. You would set up a canopy over the car you were working on to stay out of the sun. Excited to see where your continued hard work and dedication takes you going forward.
Probably the happiest and most excited I’ve seen Eleazar in awhile. You guys got a whole compound going on! Now you can move the frame machine beside the paint booth and have more room inside for the toys!
not bad of an idea honesly, only if they cover all the new fresh concrete
Genius idea on the frame machine if they get a cover
@@whumphagreed, a building over top is a must. Great investment for the property and for protecting their other investments. Either a nice metal building or if they wanted to “up the ante” they could build something out of brick/block/stone. I’m not sure how things work in TN but If I’m not mistaken having a masonry building on your property increases the value as it’s considered a permanent structure and built to be stronger and more weather proof than wood or metal.
They said they're putting a Carport over it,and some of the slab.Once Simeon's place is done,he'll move a couple rides there.He has a 4-5 car garage there.They Won't be putting the frame machine outside.
@@bryduhbikeguyyes they’ll need the extra security I think!
Pops got the gloves and headband on. Now I know you guys are in good hands! Much love and respect for Pops.
So great to see how far you have guys have come and your Pops involved every step of the way. Lost my father this year and its great to see your pops so happy to always be helping you guys. Been a fan since the corvette under the tent in the driveway
It’s so awesome getting a front row seat to watch two brother build an empire and a legacy for generations to come. Keep on keepin on brothers! ❤
You shouldnt have put the kitchen and fancy sitting area in your workshop, thats where the paint booth shouldve went.
Guys the paint booth needs to be in a building, they are not meant to exposed to the elements, not to mention it will be literal oven in the summer, the paint will flash before it hits the surface, and in the winter just the opposite, the paint booth y'all used in the past is enclosed for a reason , mainly to have a stable environment to paint, and if you haven't already you may need a small source emissions permit for the paint booth, depending on state environmental laws
they are actually building a structure around it.
I agree with everything you said.
Permits permits we dont need no stinking permits !!
@@tnolan3176
Still need to check on that, the fines the DEQ levels for non compliance is in the thousands and they will enforce it, speaking from my position at my facility
@@magi115 lol if they are building a structure around it why would they pour a slab barely large enough for the booth.
Love your channel 2 young men putting in the work nice to see, I am 60 and still love building cars and now I am teaching my son and he loves it we both watch your channel every day , great content great people , pops is a work horse
I honestly love the way you will give anything a go, and pops is always there to help love this channel ❤️
He said “that sucker was just absolutely salvaged” 🤣🤣🤣🤣🤣🤣🤣 I started dying laughing I was waiting to see what y’all said about it and that was funny asf
So amazing seeing you guys finally getting your own paint booth, now you’ll always have a clean and readily available booth. Looking at what seems to a fair amount of rust on that whole motor housing and motor shafts I’m hoping you got a decent price. Very happy for you guys! 👍👏
A pain booth would be horrible
@@FastLaneLyfe Haha yes it would
Guys I am just in absolute awe of what you guys can do!! You built homes, very complicated cars, your workshop and now a paintbooth!! Truly high 5s and salutations to you! Amazing!! Have been following you guys in silence since the built of Pop's Dodge truck! Each project is mesmerizingly interesting although admittedly at the beginning of each, not sure if possible but, its always completed! Congrats!!
Look absolutely sick guys!!, you guys have come a long ways from where yall were, keep up the awesome work, can't wait to see this and the Lamborghini finished!!
You guys are something else. No one can do this without a deep pocket to spend on parts, tools and place.
Loving the content! Been watching since the mustang, y’all’s dedication and hard work is incredible, keep it up guys
I love you guys, how you just get on and tackle absolutely anything is pretty amazing. Keep going guys
You know that flat roof is going to be a big problem. No where for rain and snow to run off.
That booth was meant to be installed inside a building.
You need a canopy over the entire building and fan housing.
Maybe even a shell over the whole project.
You need some professional advice before it’s too late and more expensive.
I can't wait to see the epic paint jobs that come out of that booth!!
Congrats on the new paint booth. You boys have come along way, since I first started wathing you..
Always great to see the boys and Pops working together. Enjoying the channel. Tks for sharing
THIS building will be the greatest addition to the Goonzquad industrial complex. You guys have done so many amazing things in your short time and it has been well worth it I am sure.
Thank you for all the good content. Keep it up guys!
love the content guys!!!! keep on building your dream cars no matter what!!!!
Love the content! The paint booth looks epic, can't wait to see you guys put it to use! You guys are killing it!
I love the new paint booth, so glad you guy's have your own booth. Good job guy's!
It's great to finally see your owne paint booth. Good job guys 🎉
You can see light getting in all around the top. If light can get in so can dirt and moisture. You have a lot of sealing to do.
I was thinking the same. And that's not even a small gap.
Loving the content I have been enjoying all of your video's. It is awesome to see how happy you guy's are building your own paint both. Great job as always with all your builds. Love your channel and content. ❤
I recommend you coat that shiny roof with "silver RV paint" great protective and cuts down on reflective properties so it doesn't interfere with Aircraft flying over. yes, that is a thing. love the booth. what an upgrade.
@@jpf1978 What does your PPL have to do with common sense, a reflective surface blaring into the sky near or within range of operation airfield should be minimized to not allow glare to interfere with Aircraft in the area, now has been several years sense i read this cation, but it does exist. so, you're saying that reflective glaring object reflected into your vision while flying wouldn't bother you. the risk is low, but still a risk. Also, the paint would help reduce the heat that tin box is going to absorb and weatherproof it. 99% of all paint booths that I've seen installed are in doors. under watertight building.
Man y’all are doing great 👍 congratulations on all the progress!
Need to get a decent car port or post frame to cover the booth and protect it from the elements!
So proud of y’all I remember when I first started watching when the video is you were on the side of the road with the RV on fire and the guy got mad at you. It’s been a minute but y’all are great. Keep up the good work.
Seeing how far you boys have come in the past few years is amazing. Keep it up
I’ve literally have watched you since the atv and bike days y’all never disappoint on the conten🔥
Everything is coming together and it looks amazing 👍🏻🙌🏻
I am so happy for you guys, you all deserve it, your own epic paint booth. Man that Lamborghini Aventador is gonna look freaking sick. Nice job, i hope you do the electrical work as well.
This is so sickkkkkkk if you have been here from the beginning of goonzquad you know this is Sooooo sick. You guys have done it you have it all!!!!!🙏
I really enjoy watching you're new longer format !!
🎉YESS SIR WE OUT HERE 🎉
Good to see you guys get your own paint booth
You guys are awesome! Your work ethic never ceases to astound me!
Pops just being a BOSS. eating a lettuce burger in the Porsche?!?! Flex on everybody pops!!!
I've never seen a Paint Booth not contained inside another Building, hopefully it has its own Hvac system
Natural parts cooker lol
They are putting a giant car port over the entire slab I believe they said in an earlier video.
They should have paid for a professional installation
I've seen them outside but generally under a lean-to attached to the main shop.
Main reason people don't have them outside is you have to push a bare steel car from the main shop into a paint booth without getting it wet or dusty or contaminated with tree sap and whatever which means you can't transfer a car in humidity, rain or wind.
@@michaelhyde641no company will install a non certified Chinese paint booth
Quite the accomplishment, long way since I watched you guys rebuild that mustang way back... wow!!
Great job guys!! The booth looks great and we know you’ll be putting it to good use. Can’t wait to see you paint the Aventador.
Let’s go!!! I’ve been watching you guys for a while now, since yall were working from your parents garage. To the house yall remodeled, Now yall have your own paint both! Sheeeesh!
Why do I have a feeling an upcoming video will be "we didn't get the permits or approvals, so we have to tear it down".
We can only hope! 😛🍿
Hope you secure that to the ground/pad. A big storm will pick it up and destroy it. Also, secure the ramps, drive tires could spit those ramps out pulling a car in.
why live area were have hurricane and big storm, normal not go live totally wrong area.
Nice work guys. I really like the hustle on this one, its inspirational.
So glad you guys went back to normal. Thank you.
Not sure why you wouldnt take the time to move one light panel to the other side and swap a couple other panels around so the light is distributed evenly across the booth with 4 light panels on each side.
Because they’re clueless
Because they don’t care. It will probably have to come down since I doubt they got a permit for that huge concrete slab messing up all the drainage that the county made them setup.
WHOOOHOOO FIRST COMMENT, LOVE YOU GUYS!! 🎉
Absolutely crazy to think of how far y’all have come to the even crazier builds your working on now! Been supporting y’all for a while now and never disappointed, always quality, living the absolute dream!
Congrats on the new paint booth. I've been watching you guys since the Mustang build. You guys always rock!! I enjoy the content very much. (I'm stationed in Japan, Military, so I cant really get anything from the Goonzquad store, Im not sure if you ship overseas, but I enjoy the content all the same). Keep being awesome!
Soooo happy for you guys!! Just make sure you do get a pro electrician. Great seeing ur dad enjoying food in the Porsche!!! That was awesome!!! Glad you posted! Can't wait for the next 1! Keep up the great work!! Can't wait for an update on the R8. Make sure you always have a good time!! 👍👍👍😊😊😊🙌🙌🙌🙏🏻❤
You guys killing the game 💪🔥🔥🔥
Wow this is really another great milestone achievement in your continuous build journey. Hard work is paying big dividends and that sure looks like a 1st class paint booth to me. Might need to get someone to bore a hole under your driveway to run the electric cable unless you cut it open from the top. Nice money maker!
As always, a very good video, I hope that everything continues to go very well in the repairs, and the best thing is that they make it entertaining to watch, I send a big greeting to everyone from Chile. ☮️
That's definitely nicer than my first apartment. Great jobs guys! Can't wait to see the paint!👍
Will those filter grates support a car ? Also if the air flow in the booth is a down draft the flters in the floor need turned over. The air flow should hit the white side first. Keep up the good content !
watch them ignore this advice lol
Yes, white on top and green on bottom.
Although this may be true, it’s not a good idea to assume the orientation of the filters based on colour, without first consulting the filter media specifications.
My first impression would be the filters shouldn't be under the wheels. Maybe they were supposed to go along the wall and the three sections in the middle would have the flat steel panels.
@@danielmarek4609hat’s exactly where you want it ( near the middle) so when you bag a car it pulls the sheet to the car like a vacuum you don’t want it near the sides as it will make the sheet flap off the job
Looking bloody amazing guys great work
Congratulations on the new paint Booth. I can't wait to see the first paint job that comes out of it..!!!
YES SIRS LOOKS PHENOMENAL! I remember when yall were working out of the family garage; yall came such a long way! congrats : )
Congratulations guys well deserved. Now you need to build a paint mixing room, with the paint shaker machine, that always keeps the paint shook up, & sponsored by PPG and Sickens!
And a compressor room ! This thing is a long way from being completed !
You guys came along way.
Remember when you guys was in your parents garage
Dreaming about the position where you guys are now
super motivational
Attention to detail and hard work. Love this channel.
I was just in chatt and drove by the shop and saw this!! Yall keep grinding! Saw pops and the pup fiddlin around when we went by!
you a stalker for that one.
Coming along nicely, boys! Do you think it would have been better to have the side door on the other side? It could attach to a little paint-mixing shed. Oh well, it's already assembled! Looks great.
Exhaust Filters are in backwards! Flip them and they will last 4x longer. Own a filter service and supply company that maintains about 50 booths a month
Awesome improvement and upgrade for your shop guys ! Congratulations !👏🏻👏🏻👏🏻👍😀
Amazing to see how far your guys have come since the jeep builds keep up the awesome work 👏
Keep up the good work guys wish you the best.
Hope you guys build some kind of shed around the paint booth so it's not exposed to the elements. Doesn't look like it would fare well after a few hard storms.
I said the same thing, how do they control the environment, instead Temps will be through the roof with the Sun beating down on that roof and what about the Winter.
@@1one3_Racing you had to include China?
@@nitebird500yep why wouldn’t he. He’s not wrong since that’s where everything is manufactured. People should be pissed
@nitebird500 they order everything from China. Nothing against China. They supply a demand. I just don't know why these boys spend stupid money on a dodgy fibreglass body kit then cheap out on a paint booth that's already started to rust in shipping.
Guys, just getting caught up on your show and hear you reference “silicone” rather than Caulk. Don’t use silicone as it is a fish eye generator and you need to use silicone free caulk. Don’t want to be the bearer of bad new but do not use silicone!!!!!
Congrats guys, I know its been a dream of yours for a while! Epic!
Sweet Paint Booth guys congrats on finally getting one that is right for the builds.
Maybe you should consider putting a extra room or shed next to it that's flame proof and use it as a paint mix prep room/ compressor room etc. as you'll be having to go back and forth to the main hq and could cause fresh paint to get contaminated. Just a thought goonz
Forgot about the air compressor ,,,good point ! Can just imagine painting in that closed up booth on a day its 100 degrees ,,talk about a sweat box ! All metal building sitting on a concrete slab in direct sunlight ,,,DAMN !!!!!!!!!!!!!
Should have used a non silicone based sealant. Silicone causes "fisheye" in your clearcoat
outside not newer used silicone, all bugs and animals eat silicone fast off, normal outside used only acryl seal not silicone seal. acryl have lot better weatherproof and bug proof and stay longtime. silicone not stay long.
Congratulations for your new paint booth build.. hope you and your family's successful.. from Malaysia 🇲🇾
Looks epic guys can’t wait to see the paint jobs from your own booth
Great to see the booth nearly finished guys.But i didn’t notice you bolt the ramps to the booth.I’m guessing you did off camera tho.Looking forward to seeing it complete and fully wired up.That first flick of the “ON” switch should be epic.Keep the videos coming guys.Great viewing
Would be cool to see a crazy paint job in the following build.
Great progress Guys on the paint booth! I would enclose the paint booth as soon as possible. Maybe putting the frame machine on the right side of the paint booth! It looks like there is enough room. Or you could use that room as a paint prep area! Getting a building built around the paint booth opens up a lot of possibilities!
every video is just a banger KEEP UP HARD WORK!!
Wow that is a really nice paint booth no young man art be very proud of themselves they're doing a fabulous job I'm always excited the. Seawater next baile's gonna be and they're paint jobs are looking absolutely professional.
After the paint booth is finished painting is going be the most exciting content 😂😂
Great progress guys, looking forward to seeing the booth in action.
That's awesome, y'all finally got the paint booth! Congratulations
So happy for y’all brother bless up ⬆️
I bem waiting so long to see y’all owning y’all own paint booth ✊🏿💪🏾
Good stuff boys 🙏 idk how many full circle things are left for you, but this was the biggest one.
Dang guys!!! I'm so happy for you all. Great job. Can't wait for the next video!!
Perfection, as always, from you guys and pops!
The paint booth looks great. I hope the sealant holds up to the weather. Suggestion...spray the roof with white truck bedliner. It will weatherseal it and it will reflect a lot of the heat from the sun.
Anchor it down good boys! Also, hope you sealed up those screws on the flat area of the roof REALLY well!!! Water always has a way of finding its way in!!! Would hate to see a leak in there!!!
i doubt it, you can clearly see daylight in the back left hand corner when they are standing inside at the end of the video.
It will leak for sure, I hope they don't get electrocuted while using the booth in rain.
Congrats on the paint booth and thank you for making me a special birthday video! You guys are the best!
. Congratulations on the booth. And I cant wait to see the car painted inside.