When i pulled the oil drain plug on my KVF650 like a whole gallon of gas poured out so im gonna replace the fuel needles but is there anything else i need to? Check like maybe that plastic fuel pump?
Fuel needles are very common to fail and cause this, make sure the needle seats are clean and should solve the problem. You might want to check the fuel valve, it was leaking on the machine from the video. Kawasaki only sells the whole part but you can get a rebuild kit and we have the steps in our free manual. I'll put a link below in case you need it for this or the carbs. www.cyclepedia.com/manuals/online/cpp-153/
I took it apart this weekend and found that the two choke plunger o-rings were installed pinched so fuel was leaking past there and flooding the cylinder then washing down into the crankcase 😢 not good after that i had a heck of a time finding them luckily its all back together now but its definitely ticking now even after a valve adjustment so probably gonna need cams and rockers 😞
I decided to replace the plastic fuel pipes since they looked rough on this one so I just got OEM pipes and o-rings for that. I can't remember exactly where I ordered the rebuild kit from but I think it was branded "QuadBoss"
Very nice
When i pulled the oil drain plug on my KVF650 like a whole gallon of gas poured out so im gonna replace the fuel needles but is there anything else i need to? Check like maybe that plastic fuel pump?
Fuel needles are very common to fail and cause this, make sure the needle seats are clean and should solve the problem. You might want to check the fuel valve, it was leaking on the machine from the video. Kawasaki only sells the whole part but you can get a rebuild kit and we have the steps in our free manual. I'll put a link below in case you need it for this or the carbs. www.cyclepedia.com/manuals/online/cpp-153/
I took it apart this weekend and found that the two choke plunger o-rings were installed pinched so fuel was leaking past there and flooding the cylinder then washing down into the crankcase 😢 not good after that i had a heck of a time finding them luckily its all back together now but its definitely ticking now even after a valve adjustment so probably gonna need cams and rockers 😞
Where did you get the kit from that has everything you need
I decided to replace the plastic fuel pipes since they looked rough on this one so I just got OEM pipes and o-rings for that. I can't remember exactly where I ordered the rebuild kit from but I think it was branded "QuadBoss"
What capacity is your ultrasonic cleaner?
5 Liter, just big enough to fit these carbs in.
@@Cyclepedia thanks. A good balance between price and capacity.
What degreasers did you use in your ultrasonic cleaner and what’s the air screw adjustment 3/4 turn ?