BEST CHEAP PROJECTOR MOUNT: HOW TO INSTALL ON CEILING & WALL, UNIVERSAL DIY INSTALLATION TUTORIAL
HTML-код
- Опубликовано: 26 авг 2024
- Product link: amzn.to/3hz1NtG
Today it's about the Universal Adjustable Projector Stand. I will use it to mount my LED projector on the wall. You can find a video on the projector on my channel. The stand consists of 4 adjustable arms, a telescopic rod and a mounting plate. First I install all four arms on the projector. For this I use M5 screws. This stand can be used for almost all projector models because the arms are freely adjustable in length and angle. 3-point screw-in projectors can also be installed. You have now installed all four arms. The projector's angle, tilt and swivel can be adjusted by this hinge. Now I put the mounting plate on. Both ceiling and wall can be installed. I chose the wall because that way I could center the projector in front of the screen. It is now important that the board is positioned precisely according to the screen. I measure the exact center of the screen on the opposite wall. Since the projector lens is not centered on this device, I measure the distance from the center of the lens to the center of the device. It is 10 cm. Therefore, the wall mounting plate must slide to the side by 10 cm, so that the lens subsequently hangs in the middle of the screen. I measure the distances to the ceiling and walls and use a water level to level the board. I draw the drill holes with a pencil and use a simple electric motor with a 6mm masonry bit to place the four holes. I also use a vacuum cleaner to suck up drill dust. I use the 6mm wall plugs and screws provided to attach the bracket. The stand, according to the manufacturer, is supposed to hold up to 55 pounds. Now the included telescopic rod can simply be installed and secured with four screws. This ensures a fully extended penis of 65cm or 24 inches. The equipped projector can now be easily mounted on the front and also secured with four screws. The procedure is the same as for ceiling installation. After installing the projector, the telescopic rod can be precisely adjusted and fixed with a screw. When all the screws are tightened, the bracket is solid and does not wobble. For less than $30, you can get a sturdy universal mount that's worth your money every time. I am satisfied with the result and look forward to a relaxing night watching movies. If another monitor is to be installed after some time, the stand can still be used. I hope this video helped you with the assembly. The product link for this slide can be found in the video description. Please leave a comment I appreciate every thumbs up. On my channel you will find many useful videos.
#projectormount #homecinema #streenmount