Hi, can you let me know of the difference in the light bulb, when adjusting the volt on the avr card. And should you get the same both ways, lower and raise the volts. And how the lights are supposed to be lit, is the one one you are testing now a good or faulty one. Thanks.
hi thanks for the great work I'm asking if i can disconnect one of the sensing input 7 or 8 until the motor tourn on high speed 1500 then connect it back to have full output directly? Would that harm any of the avr or generator?
the engine must run in pre-heat and idel speed for 36 seconds in same time it gives 25 hz with 190 volts and I'm afraid that it will damage some equipments so I want a way to disable the avr until the 36 pass and the engine speeds up to 1500
F+/F- kiyanne Dc out ekka neda ethanata LED 230 bulb ekka neda set kral thiyenne e bulb wada kranne kohomda poddk kiyala denawada wada kran widiha vedio dannko
Sir! When the AVR receives 230V, the dc current emitted from both (f +) and (f-) decreases, and the light in the bulb decreases. When increased, the bulb glows brightly. He can also take the AC power that comes out little by little when he gives us more or less power to the Amcher coil or exitor winding. With control.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Hi, can you let me know of the difference in the light bulb, when adjusting the volt on the avr card. And should you get the same both ways, lower and raise the volts. And how the lights are supposed to be lit, is the one one you are testing now a good or faulty one.
Thanks.
Good job 👍
Thank you for the demo
Hi,
pleas why is my AVR putting out only two phase and making the neutral as phase on a three phase gen
hello can you make a video for this charging a 72v battery? let see if what amps stable on charging.
1.5kw wage genarator ekakaka avr eka weda karana heti kaya dennako .
Nice educational 👍👍👍
May i know what type of Avr are you using?
hi thanks for the great work
I'm asking if i can disconnect one of the sensing input 7 or 8 until the motor tourn on high speed 1500 then connect it back to have full output directly?
Would that harm any of the avr or generator?
the engine must run in pre-heat and idel speed for 36 seconds in same time it gives 25 hz with 190 volts and I'm afraid that it will damage some equipments so I want a way to disable the avr until the 36 pass and the engine speeds up to 1500
You checking DC volt bulb is DC or ac bulb sir. F1, F2
This is AC bulb 100%
Mas mau tanya mas avr saya kok lampu LED x masih walaupun hz 50 mas mohon infox mas
Ac bulb? Light via the exciter output?😱
You must check the DC voltage of f- and f+
capillary ජෙනරේටරය panel data set in ටිකක් තියෙන මං එවන්නද
F+/F- kiyanne Dc out ekka neda ethanata LED 230 bulb ekka neda set kral thiyenne e bulb wada kranne kohomda poddk kiyala denawada wada kran widiha vedio dannko
Aka dc bulb akak neda....
Na AC
ethanata voltage kiyak enawada kiyala denagaman video dannwda abirupana video poddk therenne nane
my dc output stays on 131v dc. please help
check mx 341 ?
Avr. Single phase 220volt ac supply avr ki output 300 volt dc voltage veri nehi hote kia falut hai
something seems unusual on this video. How can u regulate voltage on a LED or compact fluorescent bulb? i stand to be corrected.
Exitor Output Voltage is regulating.
Sir!
When the AVR receives 230V, the dc current emitted from both (f +) and (f-) decreases, and the light in the bulb decreases. When increased, the bulb glows brightly. He can also take the AC power that comes out little by little when he gives us more or less power to the Amcher coil or exitor winding. With control.
Hi sir, I didn't understand, what about AVR DC output ?
sahoo oy out eka dunna bulb eka ac/dc da.
AC
Nonsense only music and screw driver😩😞
110v ජෙනරේටරයක් 220v කරන විදිය වීඩියෝවකින් දාන්න.
මල්ලි avr එකක් ක්රියාකාරීත්වය නැති වෙන්නේ මොන හේතු නිසාද කියන්න පුලුවන්ද?
Build up Voltage එකක් Suply යනවද බලන්න..
Vistara karla දෙන්න
කියලා දෙන්න, නොදන්නා අයට දැනගන්න
မီးစက်မညိမ်လို့ပါလာရောက်ပြုပြင်ပေးသူရှိပါမလား
Aap ke pass abr pilate hi
ඔහොම පෙන්නුවම විතරක් හරිද ඔක විස්තර කරලා කියලා දෙන්න😡