@@RitikVerma321 1 hapta hua duke 200 mein sleeper clutch diyahua he mein 4 months pehele bike kharida to ab to Duke 200 ka kuch din bad sleeper clutch milega ktm service mein to sleeper clutch lagake kuch to problem nehi hogana jaise ki upka clutch free nahi hei or bike vibration hei ? (Per main original duke 200 ka lagaunga duke 200 mein)
Hello bro !! Do u still have this 160 4v with custom slipper clutch from 200 4v ????? If yes , is it working smoothly still !!?? What changes did u feel in performance and fuel efficiency after this installation ?? Would you suggest me to try this in my rtr 160 4v ???? Plz reply.🙏🙏
Bro, after installing slipper clutch in my apache 160 4v, I'm feeling that the gear shifting is so hard and even I can't neutral my bike. And when I press the clutch leaver, my rear wheel still spinning. Is there any tips or tricks to install slipper clutch on apache 160 4v ? Please reply. I owe you. Thanks in advance.🙂
Bhai maine aaj apne 180 me lagvaya same slipper clutch gear to bahut smooth ho gya but baki to sab same hi h engine breaking aise hi h jab down shift kar rha hu any idea plz reply
Where can we buy those clutch plates For all the bike enthusiasts There's no problem installing slipper clutch on your 160 4v it's working perfectly. It has costed me around 3000 rupees Including installation It's a different experience riding a slipper clutch
I Have just installed the slipper clutch on my 160 4v bs4 I had harder downshifts and The clutch is not performing closing action Did you face the same problem at first
Bro i too tried to install the slipper clutch in my RTR 160 4v 2020 model but after installing the clutch even when I press the clutch the bike still moves i don't know what's the issue Can you pls tell me how to solve this
@@RitikVerma321 is that happened in your case as well? Also gear shifts are too hard some times gear was not shifting that's why I removed and placed the stack assembly
@@deep04ff28 no buddy not at all Gear shiffting becomes hard if not installed properly Many people are facing the issue I also installed in my 4v . It was waste of money After few days of installing I adjusted clutch wire and chain then the shfting becomes hard. If you are thinking slipper clutch will make you fly, don't install it, there is not such advantage of it. Things about slipper clutch shared in internet are not that much impactful in real life I suggest you to not install it. Cost of slipper clutch-2500 in 2023
@@vallishaik6314 bro kyuki isme engine ki side open hoti hai or ye kaam aap khud ki mrzi se krwaoge toh warranty khtm hojati hai agr aapki bike new hai toh..
Me recommend nahi karunga ki aap isko apni bike me install kare kyuki kuch bikes me iski fitment sahi nahi bethti jisse ki over race jaisi problems aati hai
Bhai Gixxer SF250 mei kaunsa slipper clutch lagega, if any
Bro does it fit in 160 2v 2016 model ?
The existing bearing fits in clutch housing or do we have to use new bearing ( no. 6201) ?
I have also seen it installed in some Rtr 2v bikes, But may have to change the bearing.
Bhai hero xtreme 125r mein kya hero karizma xmr 210 ka slipper clutch laggega?
@@Deeptech988 kuch nhi kaha jaa skta
Bhai Avenger 220 mein konsa slipper clutch use kare?
Brother 160 2v 2016 model pe apply kr skte h kya
@@GoldiTiwari-x4l kar sakte hai lekin sahi se kaam karga ya nahi kuch nahi kehh skte
Will it fit in Keeway CR152 regular clutch? 🙏🏽 thanks
Not sure
Pulsar 220f me konsa sleepier clutch lagega?
Pulsar 250f ka hoga baiya?
Nahi hogato konsa hoga?
@@gaurabpaalit06 agar new generation ki pulsar 220f me slipper clutch aa rha hai toh hi lag sakta hai lekin confirm nahi hai.
@@RitikVerma321 ok
That's my dude🔥
Thank you bro 🙏 keep sharing 🙂
Ktm duke 200 main sleeper clutch use kar sakte hei kya
Yeh vala nahi lekin jo duke 200 ke liye aata hoga vo lag skta hai
@@RitikVerma321 1 hapta hua duke 200 mein sleeper clutch diyahua he mein 4 months pehele bike kharida to ab to Duke 200 ka kuch din bad sleeper clutch milega ktm service mein to sleeper clutch lagake kuch to problem nehi hogana jaise ki upka clutch free nahi hei or bike vibration hei ? (Per main original duke 200 ka lagaunga duke 200 mein)
@@ShahidAfridi0 agar apki bike new hai toh rhene do koi jarurat nahi slipper clutch ki
@@RitikVerma321per keu nahi
(bohat bura lagrahe hei jabse pata chala ki duke 200 mein sleeper clutch dediya tabse)
@@ShahidAfridi0 koi baat ni bhai manual clutch ki bhi alag hi baat hai
Hello bro !! Do u still have this 160 4v with custom slipper clutch from 200 4v ????? If yes , is it working smoothly still !!?? What changes did u feel in performance and fuel efficiency after this installation ?? Would you suggest me to try this in my rtr 160 4v ???? Plz reply.🙏🙏
Brother, try it at your own risk because it does not fit properly in some Apaches. I have installed it in my bike only as an experiment.
Bhai pawar badi hai ki utani hai
Can we install slipper cluch pulser 135 ls ys or no🙄
No or maybe
Bro, after installing slipper clutch in my apache 160 4v, I'm feeling that the gear shifting is so hard and even I can't neutral my bike. And when I press the clutch leaver, my rear wheel still spinning. Is there any tips or tricks to install slipper clutch on apache 160 4v ? Please reply. I owe you. Thanks in advance.🙂
ruclips.net/video/6-tbpilhR7I/видео.html
Bhai maine aaj apne 180 me lagvaya same slipper clutch gear to bahut smooth ho gya but baki to sab same hi h engine breaking aise hi h jab down shift kar rha hu any idea plz reply
Bhai slipper clutch new hai kya ??
@@RitikVerma321 yes brother service centre se box pack lgvai h kal 2600 , total 3000 ki PDI lgva ke
@@Jdlot2212 aapne service centre valo ko nhi btaya yeh problem?
@@RitikVerma321 aaj bat karunga kal late Tak huaa tha kaam
Brother can i install it in my apache rtr 1604v 2021
I would not recommend bro
Bro motovlog pr bhi chahiye video
Haa jarur bro 👍
Yea Kawasaki 250 mai fit hoga...??
Yeh vala nahi. par kawasaki 250 ke liye alag se aata hoga vo fit ho sakta hai
@@RitikVerma321 kaha melyga...?? Any idea ?
@@bhaihussain6271 kawasaki ke service centre valo se pata karo
Where can we buy those clutch plates
For all the bike enthusiasts
There's no problem installing slipper clutch on your 160 4v it's working perfectly.
It has costed me around 3000 rupees
Including installation
It's a different experience riding a slipper clutch
From TVS service center
I Have just installed the slipper clutch on my 160 4v bs4
I had harder downshifts and
The clutch is not performing closing action
Did you face the same problem at first
@@bhanu4365 yes par starting me apko thoda clutch tight rkhna pdega. Uske baad khud se setting beth jaati hai iski
@@RitikVerma321 i tried tightening to the full limit but no change
@@bhanu4365 bro iska matlb aapki bike me suit nahi beth raha hai vo
Bro aap Pulsar gadi ko unicorn tyre instal kar sakte ho
Unicorn ke tyre ka section number kya hai ?
@@RitikVerma321 back tyre 110/90 18inches
@@mallieswar2792 nahi bhai nahi lgega kyuki sbhi Pulsar ka Tyre Rim size 17 inch ka hota hai apke tyre ka section bda hai.
Bro i too tried to install the slipper clutch in my RTR 160 4v 2020 model but after installing the clutch even when I press the clutch the bike still moves i don't know what's the issue
Can you pls tell me how to solve this
Clutch tight rakhna pdta hai kuch din tak kyuki slipper clutch new part hai bike ke liye toh usko varentire hone me time lagta hai kuch din tak
@@RitikVerma321 is that happened in your case as well? Also gear shifts are too hard some times gear was not shifting that's why I removed and placed the stack assembly
@@praveenkumarp8268 bro khi install ke time aapne ek clutch plate alg vale slot me toh nahi lgai thi ?? Jisme single clutch plate lagti hai
@@RitikVerma321 No... We fitted directly like you have done
@@praveenkumarp8268 frr toh kya hi ho skta hai bro
Rs 200 ke konsa lagega
Bhai agar latest BS6 RS200 me slipper clutch aane laga hai toh vo hi vala lagne ke chances honge.
osm
Thank you bro🙏
Apache 200 4v bs4 pressure plate nhi mela rha hai
Dm karo Instagram par
Hi bro I have apache rtr 200 4v bs3 can I install sleeper clutch plz suggest me
You can do it bro, but I will say that let it be as it is.
Bro does it's have some advantages
@@deep04ff28 no buddy not at all
Gear shiffting becomes hard if not installed properly
Many people are facing the issue
I also installed in my 4v . It was waste of money
After few days of installing I adjusted clutch wire and chain then the shfting becomes hard.
If you are thinking slipper clutch will make you fly, don't install it, there is not such advantage of it.
Things about slipper clutch shared in internet are not that much impactful in real life
I suggest you to not install it.
Cost of slipper clutch-2500 in 2023
Bro can you give the link or website link slipper clutch
Bro yeh aapko online nahi milega ye apko Apni City ki Tvs service centre me mil jaayega
@@RitikVerma321 my bike is bs4
@@vallishaik6314 okay bs apki bike ki warranty khatam hojayegi isse.
@@RitikVerma321 Q bro
@@vallishaik6314 bro kyuki isme engine ki side open hoti hai or ye kaam aap khud ki mrzi se krwaoge toh warranty khtm hojati hai agr aapki bike new hai toh..
I think it's 200 4v's clutch.
Yes
Part number please for apache rtr 160 4v bs4 model
Me recommend nahi karunga ki aap isko apni bike me install kare kyuki kuch bikes me iski fitment sahi nahi bethti jisse ki over race jaisi problems aati hai
Apaki bike to thik chal rahi hain na?
@@priteshpatil7027 haaan
Please share part number
@@priteshpatil7027 NF070010
✍👌🤘👍👍❤😁... jai RAM-jeeki, Assalam.Allahu-AKBAR.
Rs200