Barra 250z .22 quick thoughts and 250 yard 6 inch steel

Поделиться
HTML-код
  • Опубликовано: 13 дек 2024

Комментарии • 16

  • @stevengoodman3498
    @stevengoodman3498 День назад +1

    Very nice!

  • @pcpkrait6964
    @pcpkrait6964 20 часов назад

    Barra 250z .22 cal long range grouping try jsb knockout slugs 25.39gr 200 yards.

  • @health4430
    @health4430 4 дня назад

    damn less than 1 sec it reaches target at 250 yards thats pretty impressive

    • @Longarc-airshootist
      @Longarc-airshootist  4 дня назад +2

      @@health4430 750 feet @ 250 yards round leaving barrel at 850, with fps loss in flight 1 sec maybe 1.2 is about right 👍

    • @pcpkrait6964
      @pcpkrait6964 20 часов назад

      ​@@Longarc-airshootistGrouping picture not seen.

  • @TangDynasty1983
    @TangDynasty1983 3 дня назад +1

    Can you share what's the diameters of the slugs you used? .217, .218 or even .219? Thanks a lot!

    • @Longarc-airshootist
      @Longarc-airshootist  2 дня назад +2

      I tried the .218 and .217s I was getting the best groups with .217 HN 27 grain and .217 AEA that I was shooting in the video

    • @TangDynasty1983
      @TangDynasty1983 2 дня назад

      Thank you for sharing. That saves me a lot of time. I know what ammo to get now.

    • @Longarc-airshootist
      @Longarc-airshootist  2 дня назад +2

      ​@@TangDynasty1983pellets also shoot great as I'm sure you seen in other more well known channels, just bare in mind, the heavy slugs don't fit the mag and are single load. I would guess up to a 34 grain slug will fit just fine👍

    • @TangDynasty1983
      @TangDynasty1983 День назад +1

      @@Longarc-airshootist Thanks again for the great info. How many shot counts do you get when your reg. is set to 190 bar? And what's your hammer setting?

    • @Longarc-airshootist
      @Longarc-airshootist  День назад

      @@TangDynasty1983 I can't give you a honest answer maybe 10 or 12, I use a lot of air and rounds when I go out so I stay tethered up to my tanks, as far as the hammer spring believe it or not I was getting the highest velocity with it backed all the way out, haven't had time to look into that yet👍

  • @health4430
    @health4430 4 дня назад

    your reg setting at 2750psi?

    • @Longarc-airshootist
      @Longarc-airshootist  4 дня назад +1

      @@health4430 yep 190 bar is 2750 psi 👍

    • @health4430
      @health4430 4 дня назад +2

      @Longarc-airshootist if u turn up to 3k psi u get the max power and anything over that u will loose power so 3k psi is the max u can get out of 250z and 3 and half turn hammer spring

    • @TangDynasty1983
      @TangDynasty1983 3 дня назад

      @@health4430 3 and half turn from the hammer screw backing all the way out, right?

    • @health4430
      @health4430 3 дня назад

      @@TangDynasty1983 all the way in 3 and half turn