Arcade1up Big Blue 20' upgrade Part 1
HTML-код
- Опубликовано: 10 фев 2025
- #Arcade1up
Here is the 5% OFF discount code: LVDS-GD
For the geek worm adapter.
As promised I said I was putting a 20' in and here it is. This is just the first part since my Geek Worm adapter went out on me. Thanks for checking out the video and part 2 should be up soon. I appreciate each and everyone of you. By the way it was just a picture on the thumbnail for now lol
Geekworm LVDS To HDMI Adapter Board with LVDS Cable (2 Versions
1.5 and 2.0 I am trying both)
geekworm.com/p...
Monitor used
Dell 2007FPB They are hard to find though Check eBay
As promised I said I was putting a 20' in and here it is. This is just the first part since my Geek Worm adapter went out on me. Thanks for checking out the video and part 2 should be up soon. I appreciate each and everyone of you. By the way it was just a picture on the thumbnail for now lol
Geekworm LVDS To HDMI Adapter Board with LVDS Cable (2 Versions
1.5 and 2.0 I am trying both)
geekworm.com/products/lvds-to-hdmi-adapter-board-converter-with-lvds-cable
Monitor used
Dell 2007FPB They are hard to find though Check eBay
Pin this one bro!
I thought i did lol
pls let us know which version works ill order same
@@atulshrivastava2235 I will I promise. I will also say it on part 2 as well.
I've never made the leap to the 20 inch monitors. They do look much better but I know once I switch one, I'll want to do them all. These cabs are already costing me enough money haha. That Big Blue is so much bigger than regular A1U's! Good job on this one and you're right on the edge of 2000 subs! Congratulations! I swear I was just saying the same thing about your 1K milestone.
Yeah you are right lol, it would be like my other video" once you go 20 you will never go back lol. Yeah I am close and I appreciate you for checking out the video. I also was on your stream today by the way lol
@@MadDadsGaming LOL!! Thats a good name for a video. Thanks for checking out the stream!
Yeah no problem and yeah that one has alot of views lol
Nice!!!!
Thanks man, i appreciate you.
That will be sweet!!! Can't wait till part 2!
Thanks man I can't either, I bought both of the adapters just incase one doesn't work lol. I appreciate you always
AWESOME! Can’t wait to see the finished product!
Yeah me either lol. I appreciate you checking out the video.
Nice job! Thanks for showing us.
No, thank you for checking the video out Don.
Love it , I just ordered my big blue today
Cool its fun, hopefully I get my adapters today. I appreciate you for checking it out.
Look forward to part 2!
Yeah I am too lol. Im hoping at least one of the boards work.
Nice video ! I think I feel more comfortable trying to mod my cab after watching this ! Just liked n subbed 👍
Thanks again for the comment and watching the video. I appreciate you and thanks for the sub.
@@MadDadsGaming No problem at all 💪 , I recently posted my home acrade set up , please check it out if you get a chance 🤞
@@CTJason Will do man.
Can't wait for the finish product
Thanks man, i just hope it works tomorrow lol. I appreciate you checking it out.
Good stuff my dude! 20” blades on the impala…call her!!
Lol yep. Thanks for checking out the video I appreciate you.
may the force be with you my dude
Thanks Akuma Rev, I appreciate you for checking out the video.
Nice, looking good!
I appreciate you for checking it out man.
Looks bright and tight.
Thanks man I appreciate you checking it out and for the support.
Looking forward to part 2 MadDads
I appreciate you Dillon for checking out the video.
Looking good dude
Thanks man. I appreciate you for checking out the video.
Good stuff MadDad! I like what you did with the PCB on the side of the cab there. May do that even in my unmodded cab (was literally about to 3D print an inverted case with screw holes for swapping them but this is much quicker lol)
Cool I appreciate you for checking out the video. That is cool and it works for me.
@@MadDadsGaming yeah the simplest way is usually the best
@@TheCodeAlwaysWins ok cool
Yeahhh Lets go
I know right lol. Thanks for checking out the video.
Just an FYI...if you are getting the current generation Geekworm board (which ends with v1.5), you will probably have to use an HDMI to VGA cable and not HDMI to DVI. If you are getting the older generation board (ends with V2.0) Then may have to get a HDMI to VGA converter box. This is what I had to do with X-Men vs Street Fighter and the board for that and Big Blue are similar. And even then there was what i can describe as a 'jittery' effect around the text. Could be they made tweaks to the Big Blue board and works ok now, but in case HDMI to DVI cable does not work, try HDMI to VGA cable.
Forgot to add...if you do use HDMI to VGA, when it first comes up you may have to select auto size on your monitor to make it fit the screen properly.
Great job, looks awsome,. Can you tell me is the resolution picture quality as good on the Dell compared to the stock 1 up monitor? Thanks.
Its way better man, if you haven't seen my comparison video i would tell you to check it out. Thanks for checking out the video and I appreciate you.
Which monitor mount/bezel kit did you use? I like how is uses the factory slots and brackets.
With how much I play this cab, this might be the one I go 20" on ... haven't touched any of my other cabinets since Big Blue dropped, hahaha.
Yeah I had to since I have basically played this more then my other cabinets lol. Thanks for checking out the video.
I was about to pull the trigger on buying Big Blue today with the Target 10% off deal, but they are sold out :(
Dang man sorry about that. I think best buy still has it for Pre order. Thanks for checking out the video.
@@MadDadsGaming Target went back in stock today, got 87 off the price too. Should deliver on the 28th! Prepare to whoop my butt.
@@mr.styles5559 ok I'll be waiting alright
Thanks! What Geekworm worked? v1.5 or v20?
Version 1.5 with the vga to hdmi cable. Check out the other video with the complete install.
@@MadDadsGaming I appreciate you. Not a lot of info out there and I heard getting a good Geekworm is like hitting the lotto lol, nevermind finding the right version. Initially I heard v1.5 works with no Arcade1Up but I'm glad it at least works with this cabinet. Watching your other videos now
@@McGuinness89 I appreciate you for checking out the videos. Yes v 2.0 works with the legacy cabinets and I have a video of it working with the Midway Legacy as well.
@@MadDadsGaming Ok so what they call v20 works with older cabinets and the newer v1.5 works with newer cabinets pretty much. Good to know
@@McGuinness89 yes but i would say try both lol.
so in theory you can add ossc to it to do the scanlines. be careful, depending on what the output resolution is, geekworm may not work. for example it doesnt work with marvel vs capcom
Im going to find out if it works, I did test it with the Geekworm I had but it would show but be distorted. So I ordered both versions to see what happens. I appreciate you for checking out the video. We will see.
@@MadDadsGaming hey man thats what i thought i saw the distorted on marvel vs capcom. i will gladly wait for your experiment. also pls keep up the great work your videos are awesome
@@atulshrivastava2235 Thanks man I appreciate you for the comment and i will let you know.
I have heard that the Geekworm devices tend to add input lag. Has this been your experience with this mod?
Thanks for the vid
I haven't had any lag on my end or noticed it when i was playing but maybe im not seeing it because I have been winning lol. Thanks for checking out the video. The other completed video is in the description or on the channel so you can see for yourself.
Wtf did I just watch
Lol it was the first part of what is going to be needed lol