Thanks for the video, awesome work as always! May God bless you! P.S. It's sad that the orange fluffy assistant can't show up. No kitty timestamps, we only got memories now.
Congratulations to the son, graduating from "apprentice" to "journeyman!" 🧑🔧 I like watching both of you, but am also happy to see the son is able to do more 😊
Pretty sure you can put an angle on the holder and push your knife or whatever you want to grind on this holder so you can use with one hand for the handle and the other just in push on the holder. Anyway nice work as usual :)
My favourite channel. They make in a different way, even though they now use more technology . Subscribed for years... Loved the first era, and love it now as well.
That was well done ... I didn't know you could sandblast a grindstone! How do you decide when to fix a wooden handle or just remake it? I love all of your videos with the enduring spirit of Avril. We still miss him 💔 but we'll keep watching 😸... Thank you! - Muddypaw 🐾
Co to jest do odrestaurowany ale jeżeli chodzi o rączkę to nowe drewno się zastosuje mi się że bejcuje i epoksyduje lakierem przezroczyste i jest to w ten czas na wieki Pozdrawiam serdecznie.👍👍👍👍👍
Na końcu widać że się spieszyłeś. Podkładka jak i śruba trzymająca kamień wygląda jakbyś pomalował rdzę. A sam kamień ma bicie. Winne mogą być same podkładki lub sam kamien który można wyrównać z pomocą innego kamienia. Wiem że potrafisz lepiej. Nie śpiesz się!
Well, I didn't like this restoration. You're usually more thorough 🧐 You didn't even apply half a coat of primer; you painted directly with electrostatics, and the holes are visible. The interior shouldn't have been painted (you could have cold-blued it if you wanted), and you also painted the holes where the steel shafts pass through. Ultimately, it's a nice restoration, but you're a professional, so let's hope for better results next time. Bye, and keep up the good work. P.S. Whoever sent it took 20 seconds to dust it off, but instead they sent it with cobwebs all over it. Maybe they thought it was Halloween.
![Gucci Mane - Crash Dummy [Official Audio]](http://i.ytimg.com/vi/m65MJSC1Jto/mqdefault.jpg)
Thanks for the video, awesome work as always! May God bless you!
P.S. It's sad that the orange fluffy assistant can't show up. No kitty timestamps, we only got memories now.
Avril would have approved 👍🏻😸
🥺🥹
😭
16:02 third hand assistance xD
Avril would be proud of this one.
Masterful work, as always.
Has she gone to the litterbox in the sky?
I like how he kept the original stone
I went to high school with a Rusty Grindstone. I wonder if this is the same guy.
🤣😂
@SeventhSwell Ah, Rusty. I think he's related to Candy Roller from a previous episode. 🐾
@meanderingwithmuddypaw 😂🤣
Congratulations to the son, graduating from "apprentice" to "journeyman!" 🧑🔧
I like watching both of you, but am also happy to see the son is able to do more 😊
Классный видос безо всякого мыла. Аппарат надёжный, помню пацаном у нас дома такой был, ножи точили. Спасибо братан за видос.
I like the bit where you grew an extra arm
Nice to see the young man has learned much from his father.
Who's his dad?
Glad to see you putting more videos out really missed your videos and channel. Have a wonderful day.❤😊
Amazing job!!! Avril would have loved this!
❤️❤️❤️👍🏻👍🏻👍🏻
Good job Labd beautiful restoration well done
Nice grind stone to have.
You should “dress” the stone so that the surface is round and flat across the face. A diamond tool or a harder stone would work.
Très très beau travail de restoration ! 👍🏻👍🏻👍🏻
Pretty sure you can put an angle on the holder and push your knife or whatever you want to grind on this holder so you can use with one hand for the handle and the other just in push on the holder. Anyway nice work as usual :)
Wonderful work, man! Really well done!!! 😃
Stay safe there with your family! 🖖😊
I always enjoy your videos!
It looks great and you did a wonderful job restoring it as well!!!!
I enjoyed your video so I gave it a Thumbs Up
Merci pour cette cette vidéo de restauration 👍 Mon grand père avait la même meule et étant petit, j'y ai passé du temps à m'amuser avec 😊
9:15 😱 I would die
That is an interesting and nice old grindstone. Good job, you two.
I see you have your nose to the grindstone. Beautiful job. Thank you for sharing and see you soon.
Nice!
Great resto👍
My favourite channel. They make in a different way, even though they now use more technology . Subscribed for years... Loved the first era, and love it now as well.
Love it
Please, go on with your works and videos ❤
@HandToolRescue would enjoy. Thank you for your craft ❤️
Always happy to see a new video
Perfect work 👍👍👍
Another nice resto job. I'm glad you were able to save the wooden handle, but I'm sure another one could've been made.
I have never had more than a single can of grease. Still, it does not surprise me that your family has a bucket of it.
Thanks for posting
Amazing!!
Great work! You guys need to get a new shop cat. I'm sure Avril would approve. *RIP Avril*
still feel sad about Avril, hopefully they do get a new cat
What are those cool channel locks?
This makes a person feel lighter.😵💫
R.I.P Avril 😭
😭😭
Lovely results.
Excellent!
Beau travail !
Nice
KOMPLIMENT 👍👍👍
Nice job. 🙋🏻
Still prefer fewer edits and longer videos, but I still love your videos
Hello. Can you show us how the paint bakes on the parts? The way it becomes flat and glossy is mesmerizing to watch.
It's good to have three hands)))
Thanks
Nice 😎😎😎👍👍👍
Nicee
I miss the old weathered hande
That was well done ... I didn't know you could sandblast a grindstone! How do you decide when to fix a wooden handle or just remake it? I love all of your videos with the enduring spirit of Avril. We still miss him 💔 but we'll keep watching 😸... Thank you! - Muddypaw 🐾
That stone is all over the place.
3:04 Dlaczego bieżnie łożysk pomalowałeś?
I was surprised to see that they painted the inside?
I would have lost at least 10 balls in the first 5 minutes
Du simple et de l’efficace, que demander de plus ? 🤩👍
Peut-être des mors doux pour l'étau.
wow new vid...XD
Toujours aussi créatif, nous vous souhaitons de continuer à briller.
👏👏👏👍
I will never understand how people can mill screws and bolts perfectly. I know I could never do it.
Some lathes have settings that will cut threads for you!
You go straight to painting after sand blasting you should clean it first then paint it
I thought you'd put new bearings.
Oopsie-doodle! XD
My grandfather had one of these (or something sufficiently similar), and I constantly regret not asking for it after he passed.
Co to jest do odrestaurowany ale jeżeli chodzi o rączkę to nowe drewno się zastosuje mi się że bejcuje i epoksyduje lakierem przezroczyste i jest to w ten czas na wieki Pozdrawiam serdecznie.👍👍👍👍👍
Beautiful work sir! Can you or someone tell me the brand and common name of the socket wrenches used here? Thank you!
😳Hoca
BIG UP 🫡
у меня есть такая мандула родом из СССР
Isn't sand blasting the grinding wheel a form of cannibalism?
La pierre est trop grossière, il faut changer le grain
(15:39) - Трещину в деревянной рукоятке нельзя было заделать?😳
Почему биение диска не устранил?
Почем на старой железяке откручиваются все гайки и винты, а на 5ти летней машине постоянно проблемы?)))
Pas de poli miroir inutile, vous savez conserver l'aspect d'un outil ancien sans le transformer en bibelot clinquant.
1:22 YEAH! for once, someone who actually use the words "bearing" and "balls" correctly! 😍
It's not the same without Avril 😭😭😭
10:10 okay, who put cocoa powder in the handle?
Lo vende
Na końcu widać że się spieszyłeś. Podkładka jak i śruba trzymająca kamień wygląda jakbyś pomalował rdzę. A sam kamień ma bicie. Winne mogą być same podkładki lub sam kamien który można wyrównać z pomocą innego kamienia. Wiem że potrafisz lepiej. Nie śpiesz się!
The body should have more work done before painting
Вот когда дошло до рукоятки, понял смотреть нечего. Получился хлам, мусор.столько трудился и всё насмарку. Зачем?
🤣🤣🤣🤣🤣
I like that you reuse as much as possible even if it's not perfect. Instead of "I make a new one" for everything.
Yup!! 😍
Always Above and Beyond
❤❤❤❤❤❤❤❤❤❤
I have Novaculite sharpening stones up to Surgical Black.
Interesting video, are you going to dress the stone or just let toolmarks bring it into concentric over time?
Зіпсував ніж.🥲
🙏👏👍💪
Excellent job but I would have felt awesome if you had leveled the stone (such a good job but damn just grindr this MF stone bro)
Well, I didn't like this restoration. You're usually more thorough 🧐
You didn't even apply half a coat of primer; you painted directly with electrostatics, and the holes are visible.
The interior shouldn't have been painted (you could have cold-blued it if you wanted), and you also painted the holes where the steel shafts pass through.
Ultimately, it's a nice restoration, but you're a professional, so let's hope for better results next time.
Bye, and keep up the good work.
P.S. Whoever sent it took 20 seconds to dust it off, but instead they sent it with cobwebs all over it. Maybe they thought it was Halloween.
Why black?
doesnt move..... maybe because it has a pin in it
Sorry but I must down-vote. You didn't re-grind the sharpening stone, get it back to a true circle and surface.