Looks super in the air and I’m not a expert, so I always learn something from you . Thanks for sharing your experience and knowledge with us. And it’s good that you’re sharing when you do mistakes. You are always telling us the truth. So keep up your super work
You might want to set the Flaps deployment to "independent" and set the Full Flap to 3 sec, if you're set on your other settings deploy time. It'll tame the balloon, but slow the plane down really nice on approach. Sweet woody! 👍
With such a sharp rise in the cost of foamies I have been buying mainly balsa planes. Granted I am an old school builder so not intimidated by balsa planes. :)
i have nothing but balsa planes and i love them, ive had two foamies in the past and they flew horible im only 15 and have been in the hobbie a year but have waaaaayyyy tooo many planes my mom wants to burn them, LOL Balsa planes rule!
Ain't NOTHING flies like Balsa and ply. Even carbon fuse and wing planes don't fly as nice as balsa and ply. There's something special about balsa and ply builds and once you get used to flying them you won't want to fly anything else.
Saaayyy jay, what if someone's budget went up from the volantex stuff? What would.you recommend for a good, fun, reliable beginner ish plane? Do U reckon the warbirds are still the good option? Or like a timber ? Thanks!
So, if you like warbirds, the 400mm eachine/volantex, try the UMX line. The timber ultra micro is okay, but takes a bit if experience. Try the ultra micro conscendo!
@dynevor6327 That's an opinion. Bigger isn't always better. Only if horizon hobby would put proper servos and reciever boards like the ar410e in ultra micros.
@Pancakerman3 also depends. Do you have a flying field near you? Or a park? If, like me, the nearest flying field is 3 hours away. So I just take my ultra micros to the nearest park. But sure, if budget allows and you have a field to fly at, a big plane isn't a bad option.
@@Anomic_Hunter202 That is also an opinion. Try building or if beyond you go ARF. Foamies are built cheap and cost is out of proportion. Try Seagull Models, VQ Models for starters as an ARF and use the best equipment that you can afford. Bigger definitely flies better and can handle more conditions, the couple of foamies that I have gather dust.
Warum so schnelle Landegeschwindigkeit?? Selbst ohne Klappen, mehr Motordrosselung musste doch gehen. Das Ding hat bestimmt niedrige Flächenbelastung und unkritische Flugeigenschaften. Der Preis für so ein winziges Modell ist schön etwas salzig...
hey jay, i dont know if you remember my comment but i was asking about a 30mm going into a cheap f16 from your temu video, i just ordered one and its getting here wendesay so ill let you know how it goes then
Sorry but ARF's don't make you a builder. You pieced a puzzle together. Unless you built it from scratch can you call someone a builder. And what is bolsa?
Looks super in the air and I’m not a expert, so I always learn something from you . Thanks for sharing your experience and knowledge with us. And it’s good that you’re sharing when you do mistakes. You are always telling us the truth.
So keep up your super work
That was a great maiden flight,and I love the green on the plane it looks awesome,great job
You might want to set the Flaps deployment to "independent" and set the Full Flap to 3 sec, if you're set on your other settings deploy time. It'll tame the balloon, but slow the plane down really nice on approach.
Sweet woody! 👍
Great looking plane your flight was awesome great video
gorgeous plane! i wish i had half the flight chops you do! haha
Love the green!
You didn't build it, you assembled it. I ❤ all things Cessna!
Love how this Cessna flys and performs Jay, I’m getting over 10 minutes on a HRB 5200 and landing with 3.80 on the checker, great video man👊🏼👊🏼
That’s a nice size wing 😂😂 STUNNING PLANE😍😍 That green is amazing
Yes balsa is always better and even better with fourstroke.
I like how the old becomes new, I have been building balsa for nearly 50 years with a concession to balsa sheeted foam wings on a few.
amazing manuevers
Put some rubber tires on it. Rolls smoother and sounds better on landing. DUBRO’S are nice!
I always prefer balsa planes. I like custom builds! And your right balsa does Fly better.
With such a sharp rise in the cost of foamies I have been buying mainly balsa planes. Granted I am an old school builder so not intimidated by balsa planes. :)
i have nothing but balsa planes and i love them, ive had two foamies in the past and they flew horible
im only 15 and have been in the hobbie a year but have waaaaayyyy tooo many planes
my mom wants to burn them, LOL
Balsa planes rule!
NICE
Nice plane, nice flying! Thanks. I live far from the USA, I have never seen that kind of landing strip, is it a tarp on top of sand?
“Nicest” 😊
Nice looking scale rc. Was there a gyro or stabilizer in the plane?
Hi Jay, Nice flying and presentation. Are you digging the new runway?
PNP, yes you do need a few extra things, battery plus charger, TX and RX. It is not marketed as either RTF or BNF.
Where do you get most of your planes
From the manufacturer that send them to him to make videos of. Perks of having 600k subs.
I'm gonna start saying BAWLSA now, sounds better to me.
Looks hard to land or is it just the pilot?
Ain't NOTHING flies like Balsa and ply. Even carbon fuse and wing planes don't fly as nice as balsa and ply. There's something special about balsa and ply builds and once you get used to flying them you won't want to fly anything else.
I never did like the Foamy’s as some call them. Goldberg Models are from my Era!👍🏿
Sheets of balsa, a plan, some templates and start cutting and gluing.
Saaayyy jay, what if someone's budget went up from the volantex stuff? What would.you recommend for a good, fun, reliable beginner ish plane? Do U reckon the warbirds are still the good option? Or like a timber ? Thanks!
So, if you like warbirds, the 400mm eachine/volantex, try the UMX line. The timber ultra micro is okay, but takes a bit if experience. Try the ultra micro conscendo!
@@Anomic_Hunter202 Forget the small stuff, go 1200mm plus, bigger flies better.
@dynevor6327 That's an opinion. Bigger isn't always better. Only if horizon hobby would put proper servos and reciever boards like the ar410e in ultra micros.
@Pancakerman3 also depends. Do you have a flying field near you? Or a park? If, like me, the nearest flying field is 3 hours away. So I just take my ultra micros to the nearest park. But sure, if budget allows and you have a field to fly at, a big plane isn't a bad option.
@@Anomic_Hunter202 That is also an opinion.
Try building or if beyond you go ARF. Foamies are built cheap and cost is out of proportion. Try Seagull Models, VQ Models for starters as an ARF and use the best equipment that you can afford.
Bigger definitely flies better and can handle more conditions, the couple of foamies that I have gather dust.
Hi can you please give the
zohd alpha strike mk lll a try
Plane got rizz, no cap
Needs lights
How do you find such a perfect place to fly😭?
Second one here
What colors does it come in
He explains that in the video.
Hi can you please give the rc plane zohd alpha strike mklll a try please
Balsa is always better , because nothing crumbles like balsa wood model 😢 you only learn that from experience
But very easy to repair, build a new piece, splice in a section. Just put a part new leading edge in one last night.
Can i get one rc plane
How about you work for your own rc plane instead of asking to get one for free
you sure can!
Yes you have to get one before you get the second one.
@@jacksoncazares3272go away
Work for it buddy
Love 😍😉🫵
She looks like a mint🤪
Warum so schnelle Landegeschwindigkeit?? Selbst ohne Klappen, mehr Motordrosselung musste doch gehen. Das Ding hat bestimmt niedrige Flächenbelastung und unkritische Flugeigenschaften.
Der Preis für so ein winziges Modell ist schön etwas salzig...
Can you send me a Cessna
hey jay, i dont know if you remember my comment but i was asking about a 30mm going into a cheap f16 from your temu video, i just ordered one and its getting here wendesay so ill let you know how it goes then
😂
Whoever like this comment I would do a push-up
Sorry but ARF's don't make you a builder. You pieced a puzzle together. Unless you built it from scratch can you call someone a builder. And what is bolsa?
This is not an ARF but a PNP as per the description, hardly a puzzle just a few connections, supply battery, supply and plug in RX and bind to TX.