Les agradecería subir un vídeo de ajustes de los ganchos y barra de aguja de pretinadora kansai especial DLR1508,gracias y felicidades por tan excelentes tutoriales.
Podrían hacer un vídeo símil ar con la máquina kansai special sx6803 ajustes del looper y sincronización de tiempos muchas gracias de antemano por su respuesta!!!
Hello. Your videos are very helpful. I am a sewing worker in Korea. Your product is the DPW-1302-W model. We are referring to the video you uploaded. I have a problem watching your video and I have a question. I made a 5.5mm gap with the looper when the needle position is 1 and 4. However, after setting the distance of 1m and 0.2mm when the needle hole and the looper move at needle position 1, Again, at No. 1 and No. 4, the distance between the looper and 5.5mm becomes narrower. No matter how hard I try, after physically creating a 5.5mm gap, After setting the gap between the needle hole and the looper again, the gap of 5.5mm becomes narrower. Is this normal?
Hi. once looper distance is fixed at needle position 1 and 4, it will not change basically. it might be some other issue. Because it seems you are using very old Kansai Picotting machine. If your looper holder / needle bar is shaking, then please change necessary parts to solve that shhaking. If you are having skip stitch problem, please check and adjust the tension of spring at the looper (parts no. 19-363-2 and 19-362-2).
Thank you for choosing Kansai Special Picot machine. www.kansai-special.com/prod_item_list/10_prod_info_item_handkerc/ Please contact E-mail as follows. hqeigyo@kansai-special.com or www.kansai-special.com/support/ Best regards
Thank you very much for your help!!
Very nice. I'm glad to hear that ! (^_^)
Awesome video
Les agradecería subir un vídeo de ajustes de los ganchos y barra de aguja de pretinadora kansai especial DLR1508,gracias y felicidades por tan excelentes tutoriales.
Thank you sir
Thank u
vary good
Podrían hacer un vídeo símil ar con la máquina kansai special sx6803 ajustes del looper y sincronización de tiempos muchas gracias de antemano por su respuesta!!!
Hello. Your videos are very helpful.
I am a sewing worker in Korea.
Your product is the DPW-1302-W model.
We are referring to the video you uploaded.
I have a problem watching your video and I have a question.
I made a 5.5mm gap with the looper when the needle position is 1 and 4.
However, after setting the distance of 1m and 0.2mm when the needle hole and the looper move at needle position 1,
Again, at No. 1 and No. 4, the distance between the looper and 5.5mm becomes narrower.
No matter how hard I try, after physically creating a 5.5mm gap,
After setting the gap between the needle hole and the looper again, the gap of 5.5mm becomes narrower.
Is this normal?
Hi. once looper distance is fixed at needle position 1 and 4, it will not change basically. it might be some other issue. Because it seems you are using very old Kansai Picotting machine. If your looper holder / needle bar is shaking, then please change necessary parts to solve that shhaking. If you are having skip stitch problem, please check and adjust the tension of spring at the looper (parts no. 19-363-2 and 19-362-2).
Porfavor un vídeo sobre la kansai sx6803 porfavor manual en idioma español !!;muchas gracias!!!
What is thread I can used this for machine
Where can shoping sparepart kansai picot
Passo a passo da troca de filtro da galoneira kansayspecial
is me konsa dhaga lagta hai
Same timing for kansai special DPW 1302-W please reply ASAP
Hello, thank you for your comment.
For product inquiries, please contact us at this address. hqeigyo@kansai-special.com
Where to buy kansai picot machine and how much is kansai picot machine please
Thank you for choosing Kansai Special Picot machine.
www.kansai-special.com/prod_item_list/10_prod_info_item_handkerc/
Please contact E-mail as follows.
hqeigyo@kansai-special.com
or
www.kansai-special.com/support/
Best regards
Over lock all nowlage give me sir
こんにちは。あなたがあげてくださった映像に多くの助けを受けています。
私は韓国で縫製の仕事をしています。
貴社の製品DPW-1302-Wモデルを使用中です。
あなたがあげてくださった映像を参考にしています。
あなたの映像を見て困難が生じ質問をいたします。
針の位置が1,4回の時ルーファー5.5mmの間隔を作成しました。
ところが、1回の針の位置で針の穴とルーパー動くときの1m、0.2mmの間隔を設定した後、
再び1,4番のときルーファー5.5mmの間隔が狭くなりますよ。
いくらみても物理的に5.5mmの間隔を作成した後、
再び針の穴とルーパーの間隔を設定した後、5.5mmの間隔が狭くなります。
これは正常ですか？
Voce teria que ter um tradutor eu so cei falar em portugues
Plzz avading timing
Ayuda