If my video was helpful and you want to support my work, you can do it by buying me a cup of coffe. The price of one "coffe cup " was set at the minimum value of 1$. Your support is optional, but for me every penny counts, because I earn a little bit above then the minimum wage :) www.buymeacoffee.com/redigitt or www.patreon.com/redigitt My Most Appreciated Videos 01 No video signal, Easy PC fix in 10 steps ruclips.net/video/i_7XUd-x0Dw/видео.html 02 Newborn puppies in the backyard ruclips.net/video/l3yvXCWnnI8/видео.html 03 How to Fix Digital Scale Lo error message ruclips.net/video/5n6nF3MFq5A/видео.html 04 Stopwatch timer 12 hour 720p ruclips.net/video/taTfMdJn_oA/видео.html 05 60 Minutes Countdown Timer Alarm Clock with Huge BANG!!! ruclips.net/video/Aha4DMf6MQQ/видео.html 06 How to Remove - Reset - Clear BIOS Password on a HP Compaq dc7800 ruclips.net/video/zJ_qF6y3QAQ/видео.html 07 Stopwatch Digital Timer 24 Hour counter ruclips.net/video/AoBb_McenvQ/видео.html 08 30 Minutes Countdown Timer Alarm Clock with Huge BANG!!! ruclips.net/video/QksZ7lhwQH4/видео.html 09 How to Fix Car door key won't turn or car door key is hard to turn ruclips.net/video/aAPvbPHAAis/видео.html 10 How to fix Non-System disk or disk error for HP Compaq nc2400 ruclips.net/video/KNVf9Xj48HY/видео.html 11 How to enter in BIOS change the boot order HP Compaq dc7800 ultra slim desktop PC ruclips.net/video/7SIK9xY7hu4/видео.html 12 Lidl - AURIOL radio controlled alarm clock unboxing - setting up - testing ruclips.net/video/eu0KUB4ESFM/видео.html 13 Testing ULGD 5.0 A1 Car battery charger from Lidl ruclips.net/video/IYv4S19QOJQ/видео.html 14 How to replace the key battery for Chevrolet Captiva ruclips.net/video/vTB-25OWt2A/видео.html 15 10 How to update BIOS for HP Compaq dc7800 USDT requested video ruclips.net/video/Ewx-3SM-JaU/видео.html 16 How to install Windows 10 on HP Compaq dc7800 USDT PC ruclips.net/video/e55uDPo4bEo/видео.html 17 Testing Visbella Headlight Restoration Kit ruclips.net/video/0UtVw0tCglo/видео.html 18 Remington HC5035 Hair Clipper unboxing and first impressions ruclips.net/video/NIZlolz9rmo/видео.html 19 Toshiba Satellite C50 BIOS key and Fast Boot Menu key ruclips.net/video/8Fkj-e_hphA/видео.html 20 How to upgrade the CPU for Acer Aspire 5315 laptop ruclips.net/video/9jpt2ibr-jc/видео.html
I like to make first an ISO from the original Windows XP CD and I load that ISO ( you wear/scratch the CD minimal in this way) in the Virtual Clone Drive and from there I load in the nLite program......if you don't get right from the first time, then you can load again the files from the original Windows XP ISO in 10 seconds, otherwise you have to copy from the original CD and it takes another 4-5 minutes, depending if the CD is scratched and how old is the optical drive. I like to preserve my CD's, never know when do you need it again. You can load in the nLite program directly from the Windows XP CD to.
Hi, got a Panasonic Toughbook, CF-30, it's quite old. When I try to boot the operative system I got the same blue screen as you. I don't want to lose the existing programs so don't want to reinstall windows. Is there a way to install these drivers without losing the programs already installed? Not sure if I have the same issue but it's quite similar
1.Aloha, you should go in the BIOS settings and verify your HDD mode. IDE(Compatible) or SATA (AHCI) or in RAID mode. If you installed without SATA drivers the WINDOWS XP, then it should be in IDE (Compatible) mode the HDD. If you installed with SATA drivers the WINDOWS XP, then it should be in SATA (AHCI) mode the HDD. Also check the date and time in the BIOS, probably the BIOS battery is to low and your BIOS was reseated to the default values Like in this video at Storage Menu -> Storage Option -> SATA Emulation ruclips.net/video/7tMEwWjjJNM/видео.htmlsi=lYhjGz9lDesaHfev 2. Or maybe your RAM memory has bad sectors, if you have more then one stick you should try to remove one , test in both slots each memory or run the memtest from CD or USB. 3.Or your HDD has bad sectors. Thank you watching, If my video or advice was helpful , then please don't forget to share, like the video and maybe subscribe, please keep me postad and good luck.
Thanks for your prompt reply, the panasonic laptop is not mine, a friend gave it to me. It has dual boot, in one win 10 and the other win xp I think. Win 10 works ok but win xp doesn't, when I try to boot it I get the blue screen, and I thought there were missing drivers. So I entered BIOS and Says AHCI, but I cannot change anything. So again not sure if the issue is related to drivers. By the way the BIOS is Phoenix. How can I troubleshoot this?
If the Windows 10 is booting, then you can acces the windows xp partition you should copy there the SATA drivers Access the Windows XP installation and go to C:\WINDOWS\system32\drivers Look for the files named something like this: iaahci.cat iaAHCI.inf iastor.cat iaStor.inf iaStor.sys you can search for drivers here pc-dl.panasonic.co.jp/dl/search?q=&button=&dc%5B%5D=002001006&p1=116&p2=1160042&oc=001005&lang=002 www.intel.com/content/www/us/en/download/18521/intel-rapid-storage-technology-ahci-for-windows-xp-for-intel-nuc.html
Hello, do you know if sata drivers are usually included in the motherboard’s driver disc? Unfortunately my motherboard (Intel DZ77SL-50K) doesn’t have any drivers listed on the manufacturer’s official website.
Hello, I didn't find for your motherboard the SATA drivers, but I find for the Asrock Z77 Extreme motherboard www.asrock.com/mb/Intel/Z77%20Extreme3/#Download which basically has the same chipset download.asrock.com/Drivers/Intel/SATA/Floppy_Win7-64_Win7_Vista64_Vista_XP64_XP(v11.2.0.1006).zip I hope this will help you, but for your motherboard probably the Windows 7 is more suitable. Thank you for watching, if my video or advice was useful, please consider to share and subscribe, good luck.
@@redigitt thanks for looking into that for me! I do have the disc included with the motherboard, do you think the SATA drivers are included in the disc?
Yes, you need to search for something like SATA Floppy Image or Floppy driver and usualy is a .zip file and for sure contain a Txtsetup.oem and the F6 Readme file where explains how to use the file, you need to press the F6 key to load the drivers from the Floppy disc....but if you integrate with Nlite the SATA driver, then you don;t have to press the F6 key.
Aloha, I don't understand your question. 1. If you want to add a second HDD to storage files, then you simply mount the second HDD, if the HDD is new and has no partition , then in Disk management you need to inicialize the HDD, make partitions and format the partitions. 2. If you want to install a second HDD with another OS, then you can unplug the first HDD from the motherboard, install the operating system on the second HDD, plug the first HDD to the motherboard then you choose from BIOS from which HDD to boot the PC. 3. There are methods to have dual boot menu, but unfortunately I never used in Dual Boot, so I can't help you with that, you need to search for dual boot. Thank you for watching, if my video or advice was useful, please consider to share and subscribe, or if you think I deserve it and you want to support my work, You can do it by buying me a cup of coffee at the minimum value of 1$.
Not possible to install all drivers but still you can just run xp on the newest hardware by using modded xp SATA driver from Intel. But there is no guarantee that it works on every system. Also running a 32 bit OS on latest x64 processor is just like using ferrari as garbage dumping vehicle. The hardware and OS must be somewhat equally capable. Pentium 4 was best suited for xp though Pentium 3 as well as upto i3 2nd gen were both capable of running xp. There is overlap zone too where many OS can be run equally well on a system. P4 can run windows 9x and DOS too.
Salutare, probabil nu ai apasat CTRL (CTRL+A) ca sa selectezi toate driverele ruclips.net/video/DAB1uFPERDY/видео.html si se poate incarca si pe rand daca apesi de mai multe ori Insert, numai ca dureaza mult mai mult procedura de incarcare a driverelor. Toate cele bune, Andy.
I have the "GIGABYTE B450M DS3H rev 1.0" motherboard, but in their site they have drivers for Windows 7, 8 and 10 only. How can I port the drivers from Windows 7 to Windows XP. (When I took it it had Windows XP x64 in HDD which died.)
Me not function error code setup could not determine the type of one or more mass storage devices installed in your system or you have chosen to manually specify an adapter currently Setup will load support for following mass storage device(s). I click enter wait 5 seconds and see blue screen Please. Help
You need to download the SATA drivers from the official motherboard support page. Of course, you can add more SATA drivers and then you can use the installation CD for other motherboards to.
Not all old computers can boot from a USB flash drive. I had better experience when I disconnected all optical drives and HDD's and left only one HDD, I used USB 2.0 flash drive, preferably smaller capacity than 4 GB and sometimes you have to wait 10-30 minutes to start to boot from the USB and maybe you have to try several times to boot from USB flash drive. That's why I prefer to install Windows XP from CD, from DVD it installs faster because the reading speed is higher. .
You can try to: 1.Use a PC 5.25" CD, DVD drive with a USB to SATA Adapter for 3.5" HDD, with external power adapter 2.Make a WindowsXP bootable USB drive or you copy in a folder to the D partitiion the Windows XP files and lunch the installation from a bootable USB drive - this I didn't tried with Windows Xp, but it worked with Windows 98 till I made a bootable CD disk. Good luck.
Aloha, if you watch the video 2-3 times and then you folow step by step the video is not that hard. Thank you for watching, if my video or advice was helpful , then please don't forget to share, like the video and maybe subscribe.
Aloha, you can use any CD burner, I used the CDBurnerXP because it's free and has a portable version. Thank you for watching, if my video was useful, please consider to like, share and subscribe, have a nice day.
I just realized it...made the SLIPSTREAM Folder under C now....but, Virtual Clone - opens in the Settings and does nothing??? Did 3 times ...Copy/Grab XP Original ISO Image....stored in the Root Directory and others too....but, nlite just does not find them......I can see them in the Folder though? I do not have your email and could send you pictures? If I click the XP ISO Folder for the heck of it - it says Make sure the Selected Folder or Drive contains the 'i386' or 'AMD64' Directory??? and proper Windows Installation Files...nLite is for a pre-install environment only??? BUT, if I close all programs and click at any of the three XP ISO Images - Windows XP opens up? By the way my Folder called SLIPSTREAM is under My Documents and not under C: Windows like you did - does it make a difference? From 6:25 to 6:40 ....too fast....what u did with Virtual Clone no idea!
You should double click on the Windows XP.ISO, then the ISO will load in the Virtual Clone Drive( you will have a second CD-ROM on your PC), you open the nLite program, press the Browse button and search for the second CD-ROM(virtual Clone Drive) and click on the Virtual Clone Drive and then you gave the saving location, in my video is the "XP for SATA" folder. If the video is to fast you can change the playback speed in the settings, the gear icon to 0.75 or 0.5, good luck.
@@redigitt o.k.....and, @ 8:20, in the HP SATA Folder, there is the Main Folder with 2 sub folders, with the 32bit and 64 bit. Do you copy ONLY the 32bit files at the end or the Files in the Main Folder plus the 32bit Files at 8:20? Kindly confirm.
Aloha, - before the installation your HDD was ok? why did you tried to reinstall the Windows? - you can see in the BIOS your HDD, maybe the HDD is bad - You can test with Windows 7,8,10 if it is recognized or not - maybe you didn't integrated the driver for your laptop chipset - do you have mechanical HDD or SDD? - could you name your HP laptop model?
@@redigitt I just got to know why I wasn't able to boot it was because my laptop has insyde crappy bios doesn't let me change sata modes I won't buy any hp products now
Your laptop has a new generation BIOS, Chipset , CPU, BIOS, I don't think the laptop will support the Windows XP in dual boot mode. But, you can use the XP in Oracle Virtualbox www.virtualbox.org/
No luck, second time too.....added the SATA drivers from the Main Folder with plus the 32bit.....by the way I am installing the New ISO on a blank 100 GB....
do you have ultraviewer on your PC? ultraviewer.net/en/ if you want I can connect to your PC and I slipstream for you this is your PC, right? support.hp.com/us-en/drivers/selfservice/hp-compaq-dc7900-small-form-factor-pc/3785403
@@redigitt Oh no...today my grandson 11 years old came and was very proud he made his own PC from scratch...re. BSOD...he said I can fix it for you and by the time I came with my coffee he installed Ubuntu on it!!! I am stuck...as ALL are saying to RECYCLE my XP tower!!!
Aloha, you need to download the SATA drivers from your motherboard support page. Thank you for watching, if my video or advice was useful, please consider to share and subscribe.
when i finished the folder didnt want to open it was the error like this file does not exist can you help or put the iso on a mediafire and give the link i very need an iso
Aloha, I can't upload the ISO, but if you folow step -by-step my video it will work. I don't understand where you got stuck, which step, please leave the time stamp from my video.
Aloha...no luck...same BSOD.....I just copied the 32bit HP SATA drivers, maybe, have to copy the other Files too from its Folder? At 8:35? Also, you are making a Clone of WinXP SP3....mine is WInXP SP0....I always download SP 2 and 3 later ignoring SP 1! Burning another ISO now!
Get windows XP SP3 inbuilt MSDN version. No need to worry about service pack integration. Just check the device ID of SATA hardware and search exact and latest driver for it. Slipstream it using nlite or UBCC and just burn the CD. You will never fail. I am testing the generic driver so that XP can be installed in any Intel SATA device. Afterwards suitable driver may be installed.
en.wikipedia.org/wiki/Opera_(company) "Opera is a Norwegian multinational technology[5] conglomerate holding company headquartered in Oslo, Norway with additional offices in Europe, China, and Africa.[6][7][8] The company's total user base, including users of its desktop browsers, mobile browsers and other services exceeds 380 million monthly active users.[9] In 2016, Opera was acquired by an investment group led by a Chinese consortium.[10] On July 27, 2018, Opera Software went public on the NASDAQ stock exchange, raising $115 million in its initial public offering.[11] "
If my video was helpful and you want to support my work, you can do it by buying me a cup of coffe.
The price of one "coffe cup " was set at the minimum value of 1$.
Your support is optional, but for me every penny counts, because I earn a little bit above then the minimum wage :)
www.buymeacoffee.com/redigitt
or
www.patreon.com/redigitt
My Most Appreciated Videos
01 No video signal, Easy PC fix in 10 steps ruclips.net/video/i_7XUd-x0Dw/видео.html
02 Newborn puppies in the backyard ruclips.net/video/l3yvXCWnnI8/видео.html
03 How to Fix Digital Scale Lo error message ruclips.net/video/5n6nF3MFq5A/видео.html
04 Stopwatch timer 12 hour 720p ruclips.net/video/taTfMdJn_oA/видео.html
05 60 Minutes Countdown Timer Alarm Clock with Huge BANG!!! ruclips.net/video/Aha4DMf6MQQ/видео.html
06 How to Remove - Reset - Clear BIOS Password on a HP Compaq dc7800 ruclips.net/video/zJ_qF6y3QAQ/видео.html
07 Stopwatch Digital Timer 24 Hour counter ruclips.net/video/AoBb_McenvQ/видео.html
08 30 Minutes Countdown Timer Alarm Clock with Huge BANG!!! ruclips.net/video/QksZ7lhwQH4/видео.html
09 How to Fix Car door key won't turn or car door key is hard to turn ruclips.net/video/aAPvbPHAAis/видео.html
10 How to fix Non-System disk or disk error for HP Compaq nc2400 ruclips.net/video/KNVf9Xj48HY/видео.html
11 How to enter in BIOS change the boot order HP Compaq dc7800 ultra slim desktop PC ruclips.net/video/7SIK9xY7hu4/видео.html
12 Lidl - AURIOL radio controlled alarm clock unboxing - setting up - testing ruclips.net/video/eu0KUB4ESFM/видео.html
13 Testing ULGD 5.0 A1 Car battery charger from Lidl ruclips.net/video/IYv4S19QOJQ/видео.html
14 How to replace the key battery for Chevrolet Captiva ruclips.net/video/vTB-25OWt2A/видео.html
15 10 How to update BIOS for HP Compaq dc7800 USDT requested video ruclips.net/video/Ewx-3SM-JaU/видео.html
16 How to install Windows 10 on HP Compaq dc7800 USDT PC ruclips.net/video/e55uDPo4bEo/видео.html
17 Testing Visbella Headlight Restoration Kit ruclips.net/video/0UtVw0tCglo/видео.html
18 Remington HC5035 Hair Clipper unboxing and first impressions ruclips.net/video/NIZlolz9rmo/видео.html
19 Toshiba Satellite C50 BIOS key and Fast Boot Menu key ruclips.net/video/8Fkj-e_hphA/видео.html
20 How to upgrade the CPU for Acer Aspire 5315 laptop ruclips.net/video/9jpt2ibr-jc/видео.html
Zabardast cheers from Toronto.....will try it out!
Good luck.
@@redigittIs the Virtual Clone required or not......not sure what it does.....still making ALL the Notes of how to do it....
I like to make first an ISO from the original Windows XP CD and I load that ISO ( you wear/scratch the CD minimal in this way) in the Virtual Clone Drive and from there I load in the nLite program......if you don't get right from the first time, then you can load again the files from the original Windows XP ISO in 10 seconds, otherwise you have to copy from the original CD and it takes another 4-5 minutes, depending if the CD is scratched and how old is the optical drive.
I like to preserve my CD's, never know when do you need it again.
You can load in the nLite program directly from the Windows XP CD to.
@@redigitt Ok...Thanks
Thank you.
You're welcome!
Hi, got a Panasonic Toughbook, CF-30, it's quite old. When I try to boot the operative system I got the same blue screen as you. I don't want to lose the existing programs so don't want to reinstall windows. Is there a way to install these drivers without losing the programs already installed? Not sure if I have the same issue but it's quite similar
1.Aloha, you should go in the BIOS settings and verify your HDD mode. IDE(Compatible) or SATA (AHCI) or in RAID mode.
If you installed without SATA drivers the WINDOWS XP, then it should be in IDE (Compatible) mode the HDD.
If you installed with SATA drivers the WINDOWS XP, then it should be in SATA (AHCI) mode the HDD.
Also check the date and time in the BIOS, probably the BIOS battery is to low and your BIOS was reseated to the default values
Like in this video at Storage Menu
-> Storage Option
-> SATA Emulation ruclips.net/video/7tMEwWjjJNM/видео.htmlsi=lYhjGz9lDesaHfev
2. Or maybe your RAM memory has bad sectors, if you have more then one stick you should try to remove one , test in both slots each memory or run the memtest from CD or USB.
3.Or your HDD has bad sectors.
Thank you watching, If my video or advice was helpful , then please don't forget to share, like the video and maybe subscribe, please keep me postad and good luck.
Thanks for your prompt reply, the panasonic laptop is not mine, a friend gave it to me. It has dual boot, in one win 10 and the other win xp I think. Win 10 works ok but win xp doesn't, when I try to boot it I get the blue screen, and I thought there were missing drivers. So I entered BIOS and Says AHCI, but I cannot change anything. So again not sure if the issue is related to drivers. By the way the BIOS is Phoenix. How can I troubleshoot this?
If the Windows 10 is booting, then you can acces the windows xp partition you should copy there the SATA drivers
Access the Windows XP installation and go to
C:\WINDOWS\system32\drivers
Look for the files named something like this:
iaahci.cat
iaAHCI.inf
iastor.cat
iaStor.inf
iaStor.sys
you can search for drivers here pc-dl.panasonic.co.jp/dl/search?q=&button=&dc%5B%5D=002001006&p1=116&p2=1160042&oc=001005&lang=002
www.intel.com/content/www/us/en/download/18521/intel-rapid-storage-technology-ahci-for-windows-xp-for-intel-nuc.html
Thanks I will try and let you know
Hello, do you know if sata drivers are usually included in the motherboard’s driver disc? Unfortunately my motherboard (Intel DZ77SL-50K) doesn’t have any drivers listed on the manufacturer’s official website.
Hello, I didn't find for your motherboard the SATA drivers, but I find for the Asrock Z77 Extreme motherboard www.asrock.com/mb/Intel/Z77%20Extreme3/#Download which basically has the same chipset download.asrock.com/Drivers/Intel/SATA/Floppy_Win7-64_Win7_Vista64_Vista_XP64_XP(v11.2.0.1006).zip
I hope this will help you, but for your motherboard probably the Windows 7 is more suitable.
Thank you for watching, if my video or advice was useful, please consider to share and subscribe, good luck.
@@redigitt thanks for looking into that for me! I do have the disc included with the motherboard, do you think the SATA drivers are included in the disc?
Yes, you need to search for something like SATA Floppy Image or Floppy driver and usualy is a .zip file and for sure contain a Txtsetup.oem and the F6 Readme file where explains how to use the file, you need to press the F6 key to load the drivers from the Floppy disc....but if you integrate with Nlite the SATA driver, then you don;t have to press the F6 key.
Bro how to I install on a 2nd hard drive without happening to the 1st hdd and my device is (hp Compaq 6350 pro sff)
Aloha, I don't understand your question.
1. If you want to add a second HDD to storage files, then you simply mount the second HDD, if the HDD is new and has no partition , then in Disk management you need to inicialize the HDD, make partitions and format the partitions.
2. If you want to install a second HDD with another OS, then you can unplug the first HDD from the motherboard, install the operating system on the second HDD, plug the first HDD to the motherboard then you choose from BIOS from which HDD to boot the PC.
3. There are methods to have dual boot menu, but unfortunately I never used in Dual Boot, so I can't help you with that, you need to search for dual boot.
Thank you for watching, if my video or advice was useful, please consider to share and subscribe,
or if you think I deserve it and you want to support my work, You can do it by buying me a cup of coffee at the minimum value of 1$.
Is it possible to slipstream drivers for a Windows 11 computer so that Windows XP can be installed on such a machine without any installation errors?
Sorry, I don't know.
Not possible to install all drivers but still you can just run xp on the newest hardware by using modded xp SATA driver from Intel. But there is no guarantee that it works on every system.
Also running a 32 bit OS on latest x64 processor is just like using ferrari as garbage dumping vehicle. The hardware and OS must be somewhat equally capable. Pentium 4 was best suited for xp though Pentium 3 as well as upto i3 2nd gen were both capable of running xp. There is overlap zone too where many OS can be run equally well on a system. P4 can run windows 9x and DOS too.
I need help i load the drivers but i cant not select all works with only one selection
Salutare, probabil nu ai apasat CTRL (CTRL+A) ca sa selectezi toate driverele ruclips.net/video/DAB1uFPERDY/видео.html
si se poate incarca si pe rand daca apesi de mai multe ori Insert, numai ca dureaza mult mai mult procedura de incarcare a driverelor.
Toate cele bune, Andy.
I have the "GIGABYTE B450M DS3H rev 1.0" motherboard, but in their site they have drivers for Windows 7, 8 and 10 only. How can I port the drivers from Windows 7 to Windows XP. (When I took it it had Windows XP x64 in HDD which died.)
Aloha, sorry I don't know, but you can install the Windows XP in a virtual machine like Oracle VM VirtualBox.
Good luck.
There are backported generic sata drivers online if you look around
Me not function error code setup could not determine the type of one or more mass storage devices installed in your system or you have chosen to manually specify an adapter currently Setup will load support for following mass storage device(s). I click enter wait 5 seconds and see blue screen Please. Help
You need to download the SATA drivers from the official motherboard support page.
Of course, you can add more SATA drivers and then you can use the installation CD for other motherboards to.
Ok I wanna try
@@redigitt i start the pc and usb is connected installer doesn"t loading
Not all old computers can boot from a USB flash drive.
I had better experience when I disconnected all optical drives and HDD's and left only one HDD, I used USB 2.0 flash drive, preferably smaller capacity than 4 GB and sometimes you have to wait 10-30 minutes to start to boot from the USB and maybe you have to try several times to boot from USB flash drive. That's why I prefer to install Windows XP from CD, from DVD it installs faster because the reading speed is higher. .
There is a problem, how do i do this, but for Toshiba and without a CD drive since my laptop's CD drive is dead
You can try to:
1.Use a PC 5.25" CD, DVD drive with a USB to SATA Adapter for 3.5" HDD, with external power adapter
2.Make a WindowsXP bootable USB drive
or you copy in a folder to the D partitiion the Windows XP files and lunch the installation from a bootable USB drive - this I didn't tried with Windows Xp, but it worked with Windows 98 till I made a bootable CD disk.
Good luck.
Please can you give me link for download XP with sata drivers?
Sorry I can't.
Very hard
Aloha, if you watch the video 2-3 times and then you folow step by step the video is not that hard.
Thank you for watching, if my video or advice was helpful , then please don't forget to share, like the video and maybe subscribe.
Do I need a XP Burner as I already have ROXIO installed and maybe can use that one?
Aloha, you can use any CD burner, I used the CDBurnerXP because it's free and has a portable version.
Thank you for watching, if my video was useful, please consider to like, share and subscribe, have a nice day.
@@redigitt Have just made all the Notes...will try it out and instead of Partitioning, will later use a blank HDD.
I just realized it...made the SLIPSTREAM Folder under C now....but, Virtual Clone - opens in the Settings and does nothing???
Did 3 times ...Copy/Grab XP Original ISO Image....stored in the Root Directory and others too....but, nlite just does not find them......I can see them in the Folder though?
I do not have your email and could send you pictures?
If I click the XP ISO Folder for the heck of it - it says Make sure the Selected Folder or Drive contains the 'i386' or 'AMD64' Directory??? and proper Windows Installation Files...nLite is for a pre-install environment only??? BUT, if I close all programs and click at any of the three XP ISO Images - Windows XP opens up?
By the way my Folder called SLIPSTREAM is under My Documents and not under C: Windows like you did - does it make a difference?
From 6:25 to 6:40 ....too fast....what u did with Virtual Clone no idea!
You should double click on the Windows XP.ISO, then the ISO will load in the Virtual Clone Drive( you will have a second CD-ROM on your PC), you open the nLite program, press the Browse button and search for the second CD-ROM(virtual Clone Drive) and click on the Virtual Clone Drive and then you gave the saving location, in my video is the "XP for SATA" folder. If the video is to fast you can change the playback speed in the settings, the gear icon to 0.75 or 0.5, good luck.
@@redigitt o.k.....and, @ 8:20, in the HP SATA Folder, there is the Main Folder with 2 sub folders, with the 32bit and 64 bit. Do you copy ONLY the 32bit files at the end or the Files in the Main Folder plus the 32bit Files at 8:20? Kindly confirm.
i integrated all the sata drivers still it is not recognizing my hard disk .. i have a hp notebook laptop
Aloha,
- before the installation your HDD was ok? why did you tried to reinstall the Windows?
- you can see in the BIOS your HDD, maybe the HDD is bad - You can test with Windows 7,8,10 if it is recognized or not
- maybe you didn't integrated the driver for your laptop chipset
- do you have mechanical HDD or SDD?
- could you name your HP laptop model?
@@redigitt I just got to know why I wasn't able to boot it was because my laptop has insyde crappy bios doesn't let me change sata modes I won't buy any hp products now
@@redigitt can you make a modified bios for my laptop model 15-bs154tu which allows sata mode change ?
@@redigitt I want to make a dual boot pc with win 10 and win xp
Your laptop has a new generation BIOS, Chipset , CPU, BIOS, I don't think the laptop will support the Windows XP in dual boot mode.
But, you can use the XP in Oracle Virtualbox www.virtualbox.org/
No luck, second time too.....added the SATA drivers from the Main Folder with plus the 32bit.....by the way I am installing the New ISO on a blank 100 GB....
do you have ultraviewer on your PC? ultraviewer.net/en/ if you want I can connect to your PC and I slipstream for you
this is your PC, right? support.hp.com/us-en/drivers/selfservice/hp-compaq-dc7900-small-form-factor-pc/3785403
I work from 07:00 till 20:00 Romania time www.timeanddate.com/worldclock/romania/bucharest, only after that
@@redigitt NP....u tell me your local time, for any day!
I'm here.
@@redigitt Oh no...today my grandson 11 years old came and was very proud he made his own PC from scratch...re. BSOD...he said I can fix it for you and by the time I came with my coffee he installed Ubuntu on it!!! I am stuck...as ALL are saying to RECYCLE my XP tower!!!
Does the driver work on any intel motherboard?
Aloha, you need to download the SATA drivers from your motherboard support page.
Thank you for watching, if my video or advice was useful, please consider to share and subscribe.
when i finished the folder didnt want to open it was the error like this file does not exist can you help or put the iso on a mediafire and give the link i very need an iso
Aloha, I can't upload the ISO, but if you folow step -by-step my video it will work.
I don't understand where you got stuck, which step, please leave the time stamp from my video.
@@redigitt k i found an ISO today and it work but anyway you tutoriale are helpful
Aloha...no luck...same BSOD.....I just copied the 32bit HP SATA drivers, maybe, have to copy the other Files too from its Folder? At 8:35? Also, you are making a Clone of WinXP SP3....mine is WInXP SP0....I always download SP 2 and 3 later ignoring SP 1! Burning another ISO now!
you can slipstream the SP 1, 2, 3 to
@@redigitt ok...will try it too.
Get windows XP SP3 inbuilt MSDN version. No need to worry about service pack integration. Just check the device ID of SATA hardware and search exact and latest driver for it. Slipstream it using nlite or UBCC and just burn the CD. You will never fail.
I am testing the generic driver so that XP can be installed in any Intel SATA device. Afterwards suitable driver may be installed.
sir in my laptop the stop code is 0x0000010D what could be the issue and solution for the same pls make video
Aloha, sorry I don't know, you can search on google www.google.com/search?client=firefox-b-d&q=0x0000010D
You using browser created in Russia... wow...
en.wikipedia.org/wiki/Opera_(company)
"Opera is a Norwegian multinational technology[5] conglomerate holding company headquartered in Oslo, Norway with additional offices in Europe, China, and Africa.[6][7][8] The company's total user base, including users of its desktop browsers, mobile browsers and other services exceeds 380 million monthly active users.[9]
In 2016, Opera was acquired by an investment group led by a Chinese consortium.[10] On July 27, 2018, Opera Software went public on the NASDAQ stock exchange, raising $115 million in its initial public offering.[11] "
@redigitt Oh ok.
where to get sata drivers?
Aloha, from your motherboard support page.
Thank you for watching, if my video was useful, please consider to share and subscribe.