over the years you have taught this 72 year old how to test and fix some lap top problems.. I am still learning to go further through your most excellent video's.. Thanks for the fun Sorin!!
I came into this channel with no knowledge of how to fix a laptop. But what I've leant so I can't even begin to describe it or mention it. Sir you're a LEGEND 💯🎉🎉🎉
Well done Sorin good job as always! I want to say hello to Mike your special customer as I did watch the earlier video and Mike and I worked together for many years so it was good to see him appear on your channel after all these years
I can tell even without that spare board Sorin would have mastered it again probably he would have injected something like 3.3 v or 1 v at that LDO output to follow the current anyway. Great job Sorin.
Hi Mr Sorin, The IC is ISL9538H, the datasheet is for ISL95338 and the video title indicates ISL 95388. Nevertheless, the video goal is clearly achieved 👏 👌
Foarte bine, am avut și eu o problemă mult mai complexă în care IC era im scurt plus un CI ESD in scurt și BQ era mort... Nu vedea bateria, nu încarca, dar până la urmă l-am rezolvat schimbând toate cele trei cipuri. Sunt grele aceste reparații mai ales când nu ai piese de schimb și nici placă donator.
These videos are amazing. I have very low experience, but thanks to your videos, I was already able to fix two devices, both of which had problems with power supply (faulty caps and shorted diode) I think I would also be able to fix a broken laptop, but didn't get my hand on any yet. I had once diagnosed a laptop and I think even correctly, but didn't want to spend any money on it since it didn't have any value.
@@vandehoek - Holding the power button pressed for 15 seconds - Bios update - loading setup defauls - in case of a bluescreen --> RAM test if RAM is ok and bluescreen appears even after a fresh installation of Windows, board has an issue.
@@Fokas_World What exactly is the issue you encounter? The device should be switched off and power supply disconnected. Just try it. Nothing will be deleted or something. Maybe the device will do some power cycles itself and then boot up.
Did the power supply clicked when the charger was plugged at 23:38 or something else clicked? Also towards the end at 26:54 there was another click, even though the current doesn't exceeds the power supply limit.
Hello, i have same laptop, but i have different problem, its charging fine and works on battery too, but its cut cpu frequency to 0.4ghz, and it looks like one phase of power on cpu is not working, maybe you had such situation and know where could be problem?
Have the exact same issues with a dell and msi gaming laptop, where it detects the charger but refuses to charge the battery, for the msi only when i remove the battery and the reset the cmos then it would charge the battery but it i remove the charger and then plug it back again it will no longer charge, the msi would detect the but will not charge and the battery will not rundown when in use and plugged in...
MAster sorin, this is pretty nice repair video, please I need help I try to get thermal cam but it is crazy expensive to get to me in Nigeria, sometimes I can't see some bad Ic due to they don't produce much heat I can't see it with petrol to fix it. I need help.
Here's some help and advice. You have to do what everyone else does and work hard and save some money every week until you have enough to buy new equipment. When I first started repairing I used IPA and a small brush to highlight overheating components, it was about 10 years before I got a thermal camera and that was because the prices had dropped and they were no longer a luxury. I started my business 20ish years ago with a borrowed soldering iron, an old multimeter and a set of cheap screwdrivers and upgraded when I could afford to. People will only give you money if you repair their items, they don't give it you for free...
I have this laptop with no power after replacing the isl chip it works but not picture on internal screen it shows on hdmi but not the internal one even i tested the screen on a same laptop and it worked fine Also i have backlight working but no image Any help
Laptop plugged in and charging so it's probably not a good idea to install the drive. Tut tut...... I'm surprised more people in the comments haven't pointed this out although I've done the same before🤣🤣 but I shouldn't!!
I've been watching your videos from the beginning and I'm learning a lot from you. Thank you very much for teaching!!!! I wish you as many successful repairs as possible and joy in what you do. Much health to you and your loved ones.
over the years you have taught this 72 year old how to test and fix some lap top problems.. I am still learning to go further through your most excellent video's.. Thanks for the fun Sorin!!
I came into this channel with no knowledge of how to fix a laptop. But what I've leant so I can't even begin to describe it or mention it.
Sir you're a LEGEND 💯🎉🎉🎉
Me too, how wonderful is Sorin :)
Well done Sorin good job as always! I want to say hello to Mike your special customer as I did watch the earlier video and Mike and I worked together for many years so it was good to see him appear on your channel after all these years
King of repair for learner is Mr Sorin our legend and teacher
I can tell even without that spare board Sorin would have mastered it again probably he would have injected something like 3.3 v or 1 v at that LDO output to follow the current anyway. Great job Sorin.
Hi Mr Sorin,
The IC is ISL9538H, the datasheet is for ISL95338 and the video title indicates ISL 95388. Nevertheless,
the video goal is clearly achieved 👏 👌
I can't believe this. I am working on the exact same chip with the same issue! Unfortunately, I don't have a spare.
Foarte bine, am avut și eu o problemă mult mai complexă în care IC era im scurt plus un CI ESD in scurt și BQ era mort... Nu vedea bateria, nu încarca, dar până la urmă l-am rezolvat schimbând toate cele trei cipuri. Sunt grele aceste reparații mai ales când nu ai piese de schimb și nici placă donator.
Ooo România Power 💪
@@zZFlaviusBoss 😂👍
I think I will fix my today it's 2 days now,I got a hint,.
Thank you sir for this wonderful work, I really appreciate🎉 ❤
One of the problems with the INTERSIL 9538H is that the microcontroller does not charge the battery. Thanks for the video
These videos are amazing. I have very low experience, but thanks to your videos, I was already able to fix two devices, both of which had problems with power supply (faulty caps and shorted diode)
I think I would also be able to fix a broken laptop, but didn't get my hand on any yet. I had once diagnosed a laptop and I think even correctly, but didn't want to spend any money on it since it didn't have any value.
Good morning sir my name is TAIWO from Nigeria, I love the way you teach, I will like to be lol you sir
We had a lot G5 in our company running. Fix for this problem was pressing "Power +F6" for 30 seconds.
Thanks, do you have more tips for the G5 and G6? I have a lot of these models with almost the same issues.
@@vandehoek
- Holding the power button pressed for 15 seconds
- Bios update
- loading setup defauls
- in case of a bluescreen --> RAM test
if RAM is ok and bluescreen appears even after a fresh installation of Windows, board has an issue.
Do we press power + F6 when laptop is on or switch off first/remove battery?
@@Fokas_World What exactly is the issue you encounter?
The device should be switched off and power supply disconnected. Just try it. Nothing will be deleted or something. Maybe the device will do some power cycles itself and then boot up.
@@Stiffler2k4 this actually kinda worked. thanks soo much
I buy some of Sorin's rosin. I hope it works well. I can't wait to try it out. You have such great videos.
Nice diagnosis
Nice vid mate I've been watching you for about 3 years
This was a one of the nicest vids mate
Love these type of repairs the most ❤
Thanks for sharing, really learning a lot from you
Another proper nice repair💪🏻💪🏻
просто великолепно интересно и информативно.Спасибо Вам
The ldo voltage is internal to the intersil chip. You could check the gate for 25v. Thats what you should have.
Grt job, special salute
Very good work 👍
Yang ang t-shirt na di nakakahiyang suotin! Baka naman..hehe
Good job mate
very nice job
Real master
Well done Sorin🎉🎉🎉🎉
nice work...
I posted on your forum a very similar issue on a HP ZBook Firefly 15. Those ISL chips are as crappy as BQ chips.
Superb ⚡️👌🏻
Don't forget to look at the part designators on the PCB... D6035... that small part is clearly a double diode ;-)
you do not use flux for chip soldering ?
25:15 inserting the nvme without unplugging the charger is kinda scary
Hi Sorin, Why the battery dont charge with 13v direct? Thank you so much.
Dont forget data pin 😊
@@meherhjb7170 thanks Sir
Great work, nice lesson!
The customer use the charger to charge the battery, dirrect charging with laptop charger LOL😂
Did the power supply clicked when the charger was plugged at 23:38 or something else clicked? Also towards the end at 26:54 there was another click, even though the current doesn't exceeds the power supply limit.
I remember this 😁
Cool
how u know from what pin start detect isue bq or intersilk? how to find sequence pin?
Goooood
A fiddly one to fix but Sorin spotted it. excellent and definitely a pizza
Can you tell me your isolate tapes inner diameter? (The blue inner ring inside)
Hello, i have same laptop, but i have different problem, its charging fine and works on battery too, but its cut cpu frequency to 0.4ghz, and it looks like one phase of power on cpu is not working, maybe you had such situation and know where could be problem?
Have the exact same issues with a dell and msi gaming laptop, where it detects the charger but refuses to charge the battery, for the msi only when i remove the battery and the reset the cmos then it would charge the battery but it i remove the charger and then plug it back again it will no longer charge, the msi would detect the but will not charge and the battery will not rundown when in use and plugged in...
MAster sorin, this is pretty nice repair video, please I need help I try to get thermal cam but it is crazy expensive to get to me in Nigeria, sometimes I can't see some bad Ic due to they don't produce much heat I can't see it with petrol to fix it. I need help.
Here's some help and advice. You have to do what everyone else does and work hard and save some money every week until you have enough to buy new equipment. When I first started repairing I used IPA and a small brush to highlight overheating components, it was about 10 years before I got a thermal camera and that was because the prices had dropped and they were no longer a luxury. I started my business 20ish years ago with a borrowed soldering iron, an old multimeter and a set of cheap screwdrivers and upgraded when I could afford to. People will only give you money if you repair their items, they don't give it you for free...
I have this laptop with no power after replacing the isl chip it works but not picture on internal screen it shows on hdmi but not the internal one even i tested the screen on a same laptop and it worked fine
Also i have backlight working but no image
Any help
Did you find the solution to this problem? Tyvm.
I like sonny vaio ❤
❤❤❤
should be recall they all have same problem from g3 and up
Why don't you stick a thermo pad on the part?
The pad makes the part will be cooled faster.
😎
Who knew SSDs were hotswap
Laptop plugged in and charging so it's probably not a good idea to install the drive. Tut tut...... I'm surprised more people in the comments haven't pointed this out although I've done the same before🤣🤣 but I shouldn't!!
wrong IC datasheet
Nice Job Boss
Nicee🔥
9538 still is not 95338! Wrong datasheet again
Nobody noticed on nvme:
WW II N/A
It can charge when computer is of
Hello🤝Good job it's time for pizza 🍕🍕🍕🍕🍕👏👏👏👏👍👍👍👍👋👋👋👋👋
why are there bots chatting in comments section?
I just wanted to ask the same question...
P.S. I just reported all of them.
The bots are interested in electronics repairs too, man. This is like medical information for them.
@@moldo8811 its bad for channel. youtube will think that owner is boosting audience and will blacklist this content.
@@c1q3 yeah I know man. I report them too everytime I see bots.
Only one ram of memory, wow he loose performance because it is on single channel
Cl esd in scurt si bk Era mort
Very good job
I've been watching your videos from the beginning and I'm learning a lot from you. Thank you very much for teaching!!!!
I wish you as many successful repairs as possible and joy in what you do.
Much health to you and your loved ones.
Nice job