Video Brio 2.0 Italtecnica 2020 English
HTML-код
- Опубликовано: 30 июн 2020
- A brief description of the new Italtecnica pressure switch, BRIO 2.0.
The renewed or implemented essential features are:
- Inspectable non-return valve
- Smart autoreset
- Anti-seize protection
- Minimum operating flow reduced to 2.5 Lt / min
- Reduced pressure drop
- New Packaging and intuitive manual
- External rubber coating for guaranteed IP65 protection
- Supply complete with straight revolving fitting for installation
Brio 2000 is good
Please I need a picture of the electronic components of his broi 2000
Brio installed but it took time to start the pump after open the tap. Why
new brio 2000 has been installed ( not used before) worked but when i stop water flowing it stops but it doesnt work when i let water flow and i need to press reset button
Same problem... and no answer from Italtecnica srl Tribano!
the solution was easy, i found it myself
@@aliakas1402 what have you made?
@@cs38cbr i turned on the pump without opening any tape water until pump stopped then i disconnected the pipe that send water to the home the same time i turnned the the screw clockwise until the pump worked again> that what i remebered
Mine some times work when we open water and sometimes don't pls tell me what is the problem and how to fix thanks
Brio can't work only if the flow is too low, that the water is not able to open the checking valve. Do you have problem of low rate on flow?
merha , ben türkiyeden yazıyorum, brio 2000 m taktırdık 1 yıldır kullanıyoz, su deposu ile evin rarasına bağlantı yaptık, yanlız musluğu açtığımızda su hemen gelmiyor birde su akarken kesilip tekrar geliyor , bu sorunu nasıl düzelte biliriz
hello, servis merkezimizle iletişime geçmeyi deneyin italtecnica@italtecnica.com
Ciao! Perche la mia brio 2000 si ferma solo quanto arriva a 6 bar.? E poi bisogna premere reset.Grazie
Salve, se avete bisogno potete contattarci all'indirizzo italtecnica@italtecnica.com