Ok, for two direct sw between trk1 work. But how configured if tham sw both side (port 5 vlan 20 as untagged), is connected Nettap storage. I need to enable lacp to port 5 or no? And enabled LACP to Nettap side?
There's always going to be at least one VLAN. If you haven't configured any others, then you're using the default. You'll just need to make sure that the default VLAN is untagged across the trunk.
Thanks for sharing....It helps me a lot
Ok, for two direct sw between trk1 work. But how configured if tham sw both side (port 5 vlan 20 as untagged), is connected Nettap storage. I need to enable lacp to port 5 or no? And enabled LACP to Nettap side?
Quick Question - what is there are no VLANS on the network when Connecting a 2920 to a 2530? This a small flat network
There's always going to be at least one VLAN. If you haven't configured any others, then you're using the default. You'll just need to make sure that the default VLAN is untagged across the trunk.
Hola, si se da: display link-aggregation verbose, muestra status: n/a
es esto correcto ??
ARE YOU IN A HURRY MISS?
no sound!
Too fast for explanation.