The outcome of this video may not have been what you expected but from all of this, you can now say "yeah the device wasn't fixable and I may have lost money on it, but at least I tried to fix someone else's mess for a customer who didn't deserve it". Good on you for having a go at it, I have so much respect for you and for what you do.
Thank you 😊 yeah it's not the end of the world. The good thing about documenting these repairs is I do still technically get paid a little bit from RUclips for the video (about £15 but better than nothing) and it shows that not every device is fixable too
Great vid mate. Always sucks when you get a no fix but showing your processes really helps the community. Perhaps if enough people see it, someone may come up with a fix at some point. Nice work 👍
Thanks mate, yeah I like to show some of the no fix stuff because it shows people not everything is fixable and sometimes we just have to give up and move on
No need to apologies Phil, I know these kinds of repairs are a nightmare for techs but for us as viewers they are the most interesting in that they are not straight forward and that it that shows us advanced testing & soldering procedures with the added intrigue of will it work after all the work. Cannot win them all but a great effort in trying to save that board for the customer.
Thanks mate, yeah I don't know if anyone noticed but I have gone a little click bait style lately so nice to have one that technically isn't clickbait lol
@@TheCod3r I was going to mention welding. The cost of having someone weld it (if you don't have the machine) would probably be more than the cost of a new nozzle, but I was going to say that it would be "honorable in the name of repair, and for good luck". But then I thought it would sound silly
@@DenjiW I do have access to a welder but it would mean travelling to my sister's house and dragging it out of the back of my brother in law's shed lol
Love your videos I wish I had skills like you! My Nintendo switch will not charge in the dock or using the official power brick. The weirdest thing is it will charge by plugging it into a computer or by using a Samsung phone charger. I replaced the battery and nothing changed. People are saying it could be the port but it doesn't make sense because it's recognized by a computer. Just wondering if it's one of those chips that you talk about. Have you ever encountered this issue and what was the fix?
Absolutely valiant effort to fix this my friend, I would have given up ages ago 😂 I do have a challenge for you if you choose to accept it, fix my ps3 CECHA00 with no display, I have already sent a message to you but yet to hear a reply as I know you are busy. I have many ps3 consoles I can donate to you which may help to fix my CECHA00, I believe it is a RSX chip re-balling / replacement fault, I just don't have the equipment required to fix it. Hope to hear from you at some point 🤞
Unfortunately I don't work on PS3s mate. If I'm being honest I scroll past PS3 requests now because i was replying to far too many of them and it was taking up too much time. Sorry about that 😕
Question Phil will you still charge the customer for the work you’ve done even tho the console doesn’t work? Great work by the way lots of love from Wakefield
We all have to start somewhere... That's why I purchased crap old broken laptops to practice on. I did the odd simple job for my friends with the pretense that I may not fix the machine and that it may become more damaged. What I didn't do was claim to be a tech, take someone's valuable equipment and then destroy it almost beyond repair like this so called "tech" has done! The board looks like it was left on a BBQ. They must have known they didn't have the skills to pull off even the diagnosis. Never mind the repair. If you can't even flow a solder joint on a ground leg, how can you reasonably expect to flow a new charging port into place etc? Some people are so stupid it hurts.
I am 12 minutes in and I wanna say. I know two things about motherboards and technology. Fuck and all. But even I can see that someone scuffed this up so bad that a real technician is sitting there crying at the thought of how badly this board has been abused.
![OhGeesy x Lefty Gunplay - What It Iz [Official Music Video]](http://i.ytimg.com/vi/L0yzW9t2ixk/mqdefault.jpg)
The outcome of this video may not have been what you expected but from all of this, you can now say "yeah the device wasn't fixable and I may have lost money on it, but at least I tried to fix someone else's mess for a customer who didn't deserve it". Good on you for having a go at it, I have so much respect for you and for what you do.
Thank you 😊 yeah it's not the end of the world. The good thing about documenting these repairs is I do still technically get paid a little bit from RUclips for the video (about £15 but better than nothing) and it shows that not every device is fixable too
Hey everyone. Please feel free to check me out on Twitch.
www.twitch.tv/thecod3r2015
Thank you
Great vid mate. Always sucks when you get a no fix but showing your processes really helps the community. Perhaps if enough people see it, someone may come up with a fix at some point. Nice work 👍
Thanks mate, yeah I like to show some of the no fix stuff because it shows people not everything is fixable and sometimes we just have to give up and move on
No need to apologies Phil, I know these kinds of repairs are a nightmare for techs but for us as viewers they are the most interesting in that they are not straight forward and that it that shows us advanced testing & soldering procedures with the added intrigue of will it work after all the work.
Cannot win them all but a great effort in trying to save that board for the customer.
Thanks mate, yeah I don't know if anyone noticed but I have gone a little click bait style lately so nice to have one that technically isn't clickbait lol
It wasn't destroyed by a Tech, come on...
It was destroyed by a person who thinks they are a Tech.
Haha love it 😂
Sorry Phil, I’m laughing at your pain. 😂 That is one jacked up board.
Had a similar problem with a Switch Lite. It was charging, but not turning on and no display. Backlight coil was dead.
Hi sweetheart iv found your channel by accident but now I'm hooked. 😊😊👌👌🙏
Awesome thank you
I like seeing the no fix " fails" .. like you say, sometimes its just B.E,R, !
This guy is Awesome,Amazing I fully understand others don't.i repair tvs people thing change this change that job done...
*random piece of glass falls out*
Me: “Oh…oh no”
Hi phil you should ask an attemp fee for boards where the messed with nice repair attempt. Great content. Keep up the good work.
Cheers mate, yeah I need to add it to my terms and conditions to be honest otherwise I can't legally charge repair attempt fees
how do you ultrasonic clean ur pcb? Do you use normal or destilled water? Which cleaner? Thx
I use de-ionized water with IPA then clean the board fully afterwards. I use a DK Sonic 3l cleaner
Fantastic video as always phil mate quick question if you don’t mind what temperature do you run your ultrasonic cleaner for and how long???
no more than 50c for 10 minutes mate :)
Quick question, the jumper wire would 0.02mm be OK to use for the charge port, or would you say 0.06 is the lowest?
Personally I'd say 0.06 or 0.1mm. 0.02 would be a bit too thin especially for power lines
M8, you are a master at soldering, surely you can silver solder that nozzle back together for a permanent fix?
Unfortunately not, it would get too hot and melt again. Welding would be an option though ;)
@@TheCod3r I was going to mention welding. The cost of having someone weld it (if you don't have the machine) would probably be more than the cost of a new nozzle, but I was going to say that it would be "honorable in the name of repair, and for good luck". But then I thought it would sound silly
@@DenjiW I do have access to a welder but it would mean travelling to my sister's house and dragging it out of the back of my brother in law's shed lol
kinda hard to tell from the angle but what tip are you using there? kinda looks like a beveled
Yeah I mainly use a T15-B15 1.5mm bevel tip for most jobs 😁
Love your videos I wish I had skills like you! My Nintendo switch will not charge in the dock or using the official power brick. The weirdest thing is it will charge by plugging it into a computer or by using a Samsung phone charger. I replaced the battery and nothing changed. People are saying it could be the port but it doesn't make sense because it's recognized by a computer. Just wondering if it's one of those chips that you talk about. Have you ever encountered this issue and what was the fix?
Ah, finally understand why the switch light ports cost so much more!
who ever did that to the board should not try and fix anything again what a mess.
Lol I agree, the ps5 video I have coming out tomorrow is even worse 😅
Absolutely valiant effort to fix this my friend, I would have given up ages ago 😂
I do have a challenge for you if you choose to accept it, fix my ps3 CECHA00 with no display, I have already sent a message to you but yet to hear a reply as I know you are busy.
I have many ps3 consoles I can donate to you which may help to fix my CECHA00, I believe it is a RSX chip re-balling / replacement fault, I just don't have the equipment required to fix it.
Hope to hear from you at some point 🤞
Unfortunately I don't work on PS3s mate. If I'm being honest I scroll past PS3 requests now because i was replying to far too many of them and it was taking up too much time. Sorry about that 😕
@@TheCod3r ok thanks for your honesty mate.
If you change your mind let me know 😂
Keep up the good work my friend 👍
Question Phil will you still charge the customer for the work you’ve done even tho the console doesn’t work? Great work by the way lots of love from Wakefield
Nah I work no fix no fee mate so I don't charge if I can't fix the console fully
We all have to start somewhere...
That's why I purchased crap old broken laptops to practice on. I did the odd simple job for my friends with the pretense that I may not fix the machine and that it may become more damaged. What I didn't do was claim to be a tech, take someone's valuable equipment and then destroy it almost beyond repair like this so called "tech" has done!
The board looks like it was left on a BBQ. They must have known they didn't have the skills to pull off even the diagnosis. Never mind the repair. If you can't even flow a solder joint on a ground leg, how can you reasonably expect to flow a new charging port into place etc?
Some people are so stupid it hurts.
I agree mate. Practice on old or unwanted stuff or stuff you buy yourself and that way the customer doesn't have to suffer
they probably think it is a Philips and its a Tri-wing.
Great video.
Pause at 10.24 two components missing top of the picture.
I'm not sure where you're referring to mate to be honest
I am 12 minutes in and I wanna say.
I know two things about motherboards and technology. Fuck and all. But even I can see that someone scuffed this up so bad that a real technician is sitting there crying at the thought of how badly this board has been abused.
8:57 😂😂😂
It's shame you can't Weld it ...to fix it
Yeah I could and I can weld but it just isn't worth it to be honest
Bro do you want to have ago at my osmo mobile pocket , I’ll pay you and get it shipped to u i am based in London
Possibly but it depends how easy it would be to get parts for them mate
Is it only me or is the video stuck on 360 p
I’ve got the same
Yes youtube is being a little bitch today it's supposed to be 4k 🙄
@@TheCod3r will it eventually change to 4k mate? If it does I’ll leave it to watch tomorrow.
@@TheCod3r classic RUclips 😔
360p?
Yeah youtube is acting up at the minute mate it's supposed to be in 4k