Thank you, thank you, thank you!!! This was a tremendous help. I had no idea how to put it together once I had the pieces cut out. This was extremely helpful!!!
I love the idea of the little glue bottle, that's so clever. It is incredibly messy if you don't have something like that and ends up ruining the paper
Thank you for making this video and sharing your knowledge. This is my 2nd card I have made with my Cricut and I was lost with Cricut's assembly instructions. Your instructions were so clear and easy to follow, my card turned out beautifully! Subscribed to your channel and look forward to learning more from you! 😍
I am so happy that my video helped you create this card! It’s one of my favourite Cricut cards and the instructions can be confusing sometimes. Thank you for subscribing. More videos coming soon!
Difficulty cutting is usually one of three things. Clean blade, correct setting and cardstock. I sometimes have to try different settings. Intricate works well for these type of cuts. I use recollections 65lb cardstock For most of these.
I cut this today from cricut design space...It didnt cut the light pink mat and only half of the light green mat for the envelope. It cut the envelope side, but not the other side
That can happen. Sometimes design space has a glitch. If you are cutting via blue tooth, you can lose connection during a cut occasionally. You can hide any parts you don’t need to cut again and then cut the ones it missed or didn’t complete. It’s annoying but it happens. Blades can get stuck and stop a cut too 🤷♀️ The first time I did this card, I used a cardstock that didn’t cut well at all. It’s all a bit if trial and error but the results can be amazing 🤩
@@trid2687 don’t know if this will b helpful at this point but. I had a similar issue, and what I did was change the size of the paper from 12x12 to 8x11 and it then gave me all the pieces I needed, after I just changed it back to 12x12 and they magically all appeared!
Hello 👋 This size, no due to the smaller width of the Cricut joy. The envelope is one piece and needs a 12x12 mat which it fills. However, if you were to reduce the project size so that the card was smaller and only as wide as you can cut on it, then it should be possible. I don’t have the joy (yet) but I believe it can cut 4.5 inches wide. So if the card was made that tall and you ungrouped and moved the inside parts on to smaller mats, I don’t see why it wouldn’t. If you have trouble with this, let me know and I will see what I can do to help.
I made it for our granddaughters 28th birthday. She is going to love it. Thank you so much for sharing this wonderful project.
You are so welcome!
Thank you, thank you, thank you!!! This was a tremendous help. I had no idea how to put it together once I had the pieces cut out. This was extremely helpful!!!
@@carolpaul-emile4070 oh I am so happy it helped! Love this card.
Thank you so much for this! Your instructions were exactly what I needed to put this card together!
I am so happy it helped
You to create!
I love the idea of the little glue bottle, that's so clever. It is incredibly messy if you don't have something like that and ends up ruining the paper
@@AbbASongs1 very true!
Thank you. You are a life saver. Clear and concise explanations!
Glad it helped!
Love the coring tool tip
Thank you so much for this. I’m about to cut this project and the instructions included in DS are confusing. Thanks for the tips!
Thank you for sharing this one! It is not an easy one. ☺️
Thank you for the video! THis was fun!
Glad you enjoyed it!
Thank you for making this video and sharing your knowledge. This is my 2nd card I have made with my Cricut and I was lost with Cricut's assembly instructions. Your instructions were so clear and easy to follow, my card turned out beautifully! Subscribed to your channel and look forward to learning more from you! 😍
I am so happy that my video helped you create this card! It’s one of my favourite Cricut cards and the instructions can be confusing sometimes. Thank you for subscribing. More videos coming soon!
Thanks so sharing I loved the video. This is such a beautiful card
I love this one, i think i might have to make a few of them to have on hand :)
@Cat Slade so I can probably make these without a Cricut right?
A beautiful card. I wanted to mention that you cannot print the instructions and supply list from within Design Space.
Thanks for the tip!
Awesome!! Thank you
Beautiful
Beautiful card!! Do you have an envelope recommendation?
It’s a Cricut design and the envelope is included in the project. Look for it in design space under pop up cards. :)
Where do you svg?
The svg is available in Cricut Design Space.
Lovely card, but I gave up ...SOO difficult to cut out 😪
Difficulty cutting is usually one of three things.
Clean blade, correct setting and cardstock. I sometimes have to try different settings. Intricate works well for these type of cuts. I use recollections 65lb cardstock
For most of these.
I cut this today from cricut design space...It didnt cut the light pink mat and only half of the light green mat for the envelope. It cut the envelope side, but not the other side
That can happen. Sometimes design space has a glitch. If you are cutting via blue tooth, you can lose connection during a cut occasionally. You can hide any parts you don’t need to cut again and then cut the ones it missed or didn’t complete. It’s annoying but it happens. Blades can get stuck and stop a cut too 🤷♀️ The first time I did this card, I used a cardstock that didn’t cut well at all. It’s all a bit if trial and error but the results can be amazing 🤩
Same with me. Logged right out and it still didn't show up.
@@trid2687 don’t know if this will b helpful at this point but. I had a similar issue, and what I did was change the size of the paper from 12x12 to 8x11 and it then gave me all the pieces I needed, after I just changed it back to 12x12 and they magically all appeared!
How’s it going!
Thanks for watching!
Hi Cat! Can you create this card with a Cricut Joy?
Hello 👋 This size, no due to the smaller width of the Cricut joy. The envelope is one piece and needs a 12x12 mat which it fills. However, if you were to reduce the project size so that the card was smaller and only as wide as you can cut on it, then it should be possible. I don’t have the joy (yet) but I believe it can cut 4.5 inches wide. So if the card was made that tall and you ungrouped and moved the inside parts on to smaller mats, I don’t see why it wouldn’t. If you have trouble with this, let me know and I will see what I can do to help.