Ideally you use a press, I used a mallet and a metal rod. But you need to be very careful you don't damage the bearing you can see in his left hand at 3.15
Hi julianto. When i ooened my compressor. Theres no liquid coming out of the piston head. Your video shows there is liquid. Is that oil? Is that water? It looks black.
Hi Juliano! Thanks for the informative video, how did you remove the motor and piston from the casing? Thanks !
Ideally you use a press, I used a mallet and a metal rod. But you need to be very careful you don't damage the bearing you can see in his left hand at 3.15
Какой объём масла в него заправлять?
The piston rings are made of Teflon. Lubrication-free.
Great video!
Hy Juliano, nice video buddy! can you perform that on my BMW X5 F15 air suspension compressor? how much would that cost? thanks
Hi Leonardo, I can get a complete kit. What country are you?
Ten film nie wniósł najważniejsze części jak oddzielić tłok od wirnika 😢
Are you in the U.S. ?
I'm in Brazil, but I have a supplier that can send parts to you.
فيديو جميل! مشترك.
hi, where I get repair kit for compressor? EB-LV-0010-F0 Thanks
Hi my check valve is faulty ,the one between the piston and the drier chamber can it be repaired or replaced?. can you source one pls?
hello i dont understand russian. what is the purpose of minute 4:28 . is it vacuum? which part?
17bar pressure standard
hello, where u get repair kit for compressor?
Hi, I can get you. You need anything?
@@julianopeixoto8748 yes i need repair kit for this compressor.
@@julianopeixoto8748 where u buy repair kit? internet shop? just send link where u buy it.
Hi julianto. When i ooened my compressor. Theres no liquid coming out of the piston head. Your video shows there is liquid. Is that oil? Is that water? It looks black.
Hi Samuel, the compressor is contaminated with
humidity.You should always check the silica gel.
@@julianopeixoto8748 ah ok. My compressor when i opened mine is dry. But the silica gel is very wet. I dried them. I thought the compressor needs oil.
Здравствуйте, мы поставляем детали пневматической подвески, могу ли я получить ваш WhatsApp, чтобы отправить вам наш прайс-лист? Спасибо.
How did you remove the connecting rod from the shaft? You skipped that bit 👍
Hi my friend, this movie russian. Remove connecting rod, through a hydraulic press. ruclips.net/video/aFa951TgvRI/видео.html 1:08
@@julianopeixoto8748 do you mind explaining it to English? Thanks mate!