Rebuild and install Delonghi air conditioning on a 2-hose system. Window connecting pvc window

Поделиться
HTML-код
  • Опубликовано: 6 сен 2024
  • It's the best you can do with a portable air conditioner.
    Anything else is a waste of electricity.
    You should also convert the window to be able to close it airtight. This helps immensely to keep the cool air in the room.
    Hard foam board Protex: www.bauhaus.at...
    Twin-wall panel ECO-UV 10mm: www.bauhaus.at...
    Twin-wall panel ECO-UV: 16mm www.bauhaus.at...

Комментарии • 31

  • @ikemkrueger
    @ikemkrueger Год назад +1

    Sieht sehr sehr professionell aus! Top! Die einzige Verbesserung die mir da in den Sinn kommt ist, vielleicht die Schläuche von aussen zu isolieren, damit die Hitze die durch die Schläuche geht, nicht den Raum erwärmt.

    • @OnlineHelpNoProblem
      @OnlineHelpNoProblem  Год назад +2

      Hallo vielen Dank 👍 Normal muss nur der untere Schlauch gedämmt werden denn dieser wird ordentlich warm 👍

    • @karyu2666
      @karyu2666 2 месяца назад +1

      @@OnlineHelpNoProblem meinst du den oberen? dort wo die warme Luft nach draußen befördert wird?

  • @thomasschlesinger5867
    @thomasschlesinger5867 Год назад +3

    Saubere Arbeit, danke fur die Anregung 👍

  • @PeterPan-tc5su
    @PeterPan-tc5su Год назад +2

    sehr sauber gelöst

  • @mosn635
    @mosn635 2 месяца назад

    Sehr gutes Video. Hast du nach dem Umbau überhaupt keinen Unterdruck mehr? Ich habe einen ähnlichen Umbau, jedoch immer noch einen sehr leichten Unterdruck. Ich bin mir daher nicht sicher, ob die Box für die Luft von außen nicht vollständig dicht ist oder ob das normal ist.

    • @OnlineHelpNoProblem
      @OnlineHelpNoProblem  2 месяца назад

      Hallo normall sollte kein unter oder überdruck da sein den sie holt luft von aussen und die selbe luft haut sie wieder raus. 🤷‍♂️

  • @aldenhozbo3000
    @aldenhozbo3000 9 месяцев назад

    Hey, gutes Video! Ich wollte nur Nachfragen, wie hast du den "Radius" bei 9:40 ausgemessen? Einfach Daumen mal Pi oder wie?

    • @OnlineHelpNoProblem
      @OnlineHelpNoProblem  9 месяцев назад +1

      Ja den raus daumen mal pi machen das er zur Form passt und die obere und untere Platte nach der Biegung anschneiden 👍

  • @HA-hr3qx
    @HA-hr3qx 2 месяца назад

    Ich würde das mit dem Umbau auch gerne machen, aber habe noch 2 Fragen:
    1. Funktioniert das Ganze auch mit: DeLonghi Klimagerät Pinguino PAC EX130 ECO REALFEEL
    2. Wenn man den Adapter hinten festklebt, verliert man dadurch die Garantie?

    • @OnlineHelpNoProblem
      @OnlineHelpNoProblem  2 месяца назад +1

      @@HA-hr3qx hallo
      1 wenn der aufbau der selbe können sie das auch machen wenn dieser anders ist dann bitte paar fotos.
      2.
      Also wenn sie da wo der kleber hinkommt Maler klebeband wie ich anbringen dann kann der kleber danacht restlos ohne Spuren entfernt werden 👍

    • @floowigg
      @floowigg 2 месяца назад +2

      Bietest du auch ein Service an, gegen Bezahlung natürlich? Der Adapter alleine würde reichen. LG

    • @samhain_88
      @samhain_88 2 месяца назад

      ​@@OnlineHelpNoProblemich habe die selbe Klima. Würdest du mir so ein Teil ausdrucken können mit dem 3D Drucker?

  • @nicolaskaufman6039
    @nicolaskaufman6039 Год назад

    Guten Tag, die Box ist genau das richtige was ich benötige. Durch den Unterdruck kommt Luft aus den Steckdosen Kaminofen und sämtliche andere Ritze. Wenn ich ein Fenster kippe kommt die heiße Luft in der Wohnung was total ineffective ist.
    Ist es egal ob ein 10cm oder 15 cm Schlauch angeschlossen wird?

    • @OnlineHelpNoProblem
      @OnlineHelpNoProblem  Год назад +2

      Hallo 15 cm sind besser da tut sich das Gerät leichter 👍

    • @nicolaskaufman6039
      @nicolaskaufman6039 Год назад +1

      Würden Sie mir so eine Box herstellen und nach Deutschland schicken? Ich habe das gleiche Gerät wie Sie.

    • @nicolaskaufman6039
      @nicolaskaufman6039 Год назад +1

      Ich bin Handwerklich nicht so begabt... Natürlich nicht für umsonst

  • @arminpavlik6496
    @arminpavlik6496 9 дней назад

    Servus! Ich hab das gleiche Klimagerät, könntest du mir sowas nach bauen und was es kosten würde?

    • @OnlineHelpNoProblem
      @OnlineHelpNoProblem  9 дней назад

      Hallo es tut mir leid aber mir fehlt leider die Zeit dafür. 🤷‍♂️
      Wenn sie einen geschickten bekannten haben und die Videoanleitung dazu sollten sie es selbst anfertigen können👍

    • @arminpavlik6496
      @arminpavlik6496 9 дней назад

      Okay Trotzdem danke!

  • @andreysamykin1143
    @andreysamykin1143 2 года назад +2

    Intake and exhaust are too close, imho. Also, what's the point to take hot air from outside and cool it down? Why not to cool down the internal air? It will be more efficient but will require to ventilate the room from time to time.

    • @OnlineHelpNoProblem
      @OnlineHelpNoProblem  2 года назад +5

      Just try it and you will see the difference 👍

    • @MrFallout92
      @MrFallout92 Год назад +2

      Since the AC is blowing out air in any case, it'll always have to suck in air from the outside too. The sucked air has to come from somewhere and that somewhere is always the outside.

    • @Hexagramaton
      @Hexagramaton Год назад +1

      The air that it takes in from the nozzle does not really cool the room. All the air that it takes in through the nozzle goes back out into the street through the other nozzle.

    • @drsubtracto
      @drsubtracto Год назад +2

      The way these portable ACs work is that they suck in the indoor air, separating them into two chambers, transferring the heat energy from one to the other, pumping out the cool part indoors and exhausting the hot one outside. This process causes low air pressure inside which is naturally compensated for by hot air from outside trickling back inside through elsewhere in your home. The reason why OnlineHelpNoProblem is doing all this is to eliminate this low indoor air pressure effect by sucking outside air instead and transferring heat from inside air completely to it and then exhausting it back out, thus making your indoor space becoming cooler quicker and stay cool for longer since the outside hot air isn't eager to rush inside due to pressure difference. This is the improved efficiency we need which I think should be built into these portable ACs in the first place but oh well, these manufacturers are stupid, I guess.

    • @arnowelscher9213
      @arnowelscher9213 3 месяца назад

      Hot exaust hose on top of the intake hose problem solved, because hot air moves up quickly.

  • @holgert4231
    @holgert4231 2 месяца назад

    Den Filter kannst des Klimagerätes kannst Du jetzt aber nicht mehr wechseln wenn der Adapter fest verklebt ist.

    • @OnlineHelpNoProblem
      @OnlineHelpNoProblem  2 месяца назад +2

      Der filter ist im oberen bereich
      Dieser kan gewechselt werden 👍

    • @holgert4231
      @holgert4231 2 месяца назад

      @@OnlineHelpNoProblem Ok, danke für die Info. Wollte mir für mein Gerät etwas ähnliches bauen. Fürchte aber, dass ich dann den Filterwechsel blockiere.