Right here's the perfect starting point: ruclips.net/video/Ay9pTLa3mSE/видео.html Not sure if it's still around the videos from 6 years ago in New Zealand.
I remember being showed you by a friend, in high school. That was when you just had the lambo and the 3 rotor in your garage. It's crazy to see how far you've come. Thanks for making these videos. EDIT: I too am lost in the sauce. Getting off work to this. The sounds alone in this are orgasmic.
Literally been waiting for this moment for years. I can only imagine how excited you are to share this moment with us! I’ve never liked a video before I’ve even seen it until right now!
It was a real treat to see this car in person at SEMA 2019. Admittedly I was completely ignorant to the build the whole time and was semi familiar with Rob as a RUclipsr. After looking up the build on Rob's channel when I back to the hotel room really was something else to see. Keep up the passion because the excitement you showed from the short test drive is so nice to see👍.
I live 20 minutes from Rob's shop and a week ago it was still 90 degrees during the day. We have had santa ana winds a few times and the next two days will bring a bunch of rain (1-3 inches). It is really cold outside right now, almost 1am, at 50 degrees :)
Thered no way a mortal car guy could handle two 3 rotors singing in unison. Better put it in a truck and call it fat lady cause when it sings hearts will stop.
AriLeblance they can easily engage and disengage the power to the front Currently it’s only rwd Rob has stated this Furthermore they wouldn’t give it 40* of steering if he didn’t have plans to fucking seeeeennnnnnndddd ittttt
I’m so proud of you guys, I’ve been with this build about every step of the way, and I starting tearing up when I saw her Rolf out of the garage, thank you for this amazing build and journey, and I’ll continue to watch this beast evolve
ruclips.net/video/Bpne1Vhhwkg/видео.html. There is a 12 rotor in this video. 11:45min. Rob it's your next project. Screw a small turbo 6 rotor, go big or go home with a turbo 12 rotor!!
I'm not crying, YOU'RE crying, Shut up. That was pure, unadulterated awesome. Truly a thing of beauty. I can't imagine how excited you must be when all of us are this giddy!
At3:30 when you have no words, can’t explain! In all congratulations on how far you have come, a lot of us can’t wait to see you ripping through the gears ⚙️ 👍🏾❤️👌
9:07 - 9:18 sounds aggressive like an Aventador, when it slowing moving through some space, throttle being taped. Also this is awd setup, in tire size makes the car look bigger beefer, & looks fantastic being lowered with suspension as well. For sure it’s in a special category like lambo, if not better because of how Rob has customized to be the only one in the world.
Congrats! You have done it! The sound of that beast is just insane! Had a smile on my face during whole the video! Thanks man and I hope to see it in person one day🤘
@Swampy I must have imagined that smoke coming out of the exhaust which is obviously massive amounts of unburned hydrocarbons probably mixed with a healthy dose of carbon monoxide.
@Swampy Yes and partially burnt oil is a very clean and healthy thing to breathe. You might want to look up what "unburned hydrocarbons" means. The point about China or India is moot and textbook deflection. This car clearly emits massive amounts of harmful exhaust emissions and it is no where near compliant with emission regulations. Whether or not India is worse you would not want every car in your city running like this, it wasn't that long ago that LA was permanently covered in a cloud of smog and they didn't even need many rotaries on the road, just very lax emissions regulations for regular piston engine cars which are still no where near as bad as this, if every car in America was a rotary (like this one, without any real emissions control systems), well I hope you like asthma, lung infections and cancer.
My opinion.. This is the best sounding car.. in the world. I don't need to have heard em all to know perfection. This is it. Its nearly beyond subjective opinion given the appropriate context. Its a visceral, raw, untamed symphony of craftsmanship, and human ingenuity, melodically on par with any orchestral piece of classical music. Congratulations on life rob.
I think you are my biggest inspiration in the engine building game because you 1: Get shit done 2: You do whatever the hell you want 3: You do crazy shit no one has ever done before I got done with my racing tractor that I've been building for just over a year so it's a TEA 20 from 1955 and I built the original engine with shaved head (4,5mm), professionally ported head, re ground cam and stiffer valvesprings. It worked like a charm and I got fourth place in front of swapped turbo diesels even with stock intake, exhaust and carb. Keep doing what you are doing and you will continue to be the best video creator on RUclips
I'm so happy to see this thing come together, maybe not in time to race Rob Spaghetti but perfection takes time. I respect the fact that you don't cut corners and when you do you'll go back to tight them up and its usually because your viewers want to see something.
Amazing. I hope when this projects is finished, all the specs, parts, and blueprints are open sourced. I would love to build a replica someday if I am ever rich.
What a day to burn into your brain. All that blood sweat and tears culminating into this day... Crazy beautiful sky, rain coming down after it breathes life. This thing is like you summoned a mythological creature. Congratulations man, can't wait to see more of it.
The rotary sound was fun when I was in school. I dreamed of the first Mazda RX-7 car. I fell in love seeing the Mazda RX-7 in the fast1 movie with Tokyo drift and in the end after I graduated from college, the dream came true. Now I have a Mazda RX-7 sprit R last edition even though in my country the price is two times. Greeting from Indonesia🇲🇨
Although i dont know you personally, we can all see the passion that went into this dream of a car. You are an Inspiration to everyone that has a project car to get up off their asses and get it done, thank you for that
It’s so enjoyable to see the happiness in his face. The bliss he was feeling after such a long time working on the project. This is what happens when you don’t give up!!
Watching the progress in every video and then hearing it alive and healthy is the most satisfying thing Rob. Will we see more fine tuning of the steering hiccups, wastegate solution, boost piping etc?
You're doing the 787B proud with that glorious brap through a side exit exhaust. This isn't even my car and I'm so thrilled to see it moving under its own power.
actually there are historical records of cave drawings of a man beside a stripped rx7 found on Neanderthal habitats that is believed to be rob building his car
I still can’t believe its actually running and that he’s driving it after all this years. I feel so proud!
i can't believe he finally got a haircut.
Rob: "Has anyone turboed a 6 rotor"?
Every YouTubue Comment in 10 years: "Wheres the 6 rotor Rob".
Right here's the perfect starting point: ruclips.net/video/Ay9pTLa3mSE/видео.html
Not sure if it's still around the videos from 6 years ago in New Zealand.
@@NoMoreBsPlease ruclips.net/video/b4V_4LENH8M/видео.html turbo 6 rotor here in south africa
Cameron Wolfford yes they have lol
rob will trust no one to ship a 6 rotor he will hand craft it from billet titanium
@@Noobish588 that car/motor is not turbocharged. At least not in the video you provided.
"perfectly emissions clean its got a catalytic converter and everything" had me dying
Definitely no cats for sure lol
@@zachdillon275 uh, yes it does, bc they said so
Plus this is in California lol. A CHP is salivating to pull him over! lol
@@palillo2006 Michigan plates, doesn't need to be smogged. Its how Hert gets away with the Twerk-Stallion.
@@lynex83 anyone can still get in trouble if driving in califas no matter which state plate they have technically yes but not so often
We came for the four rotor, we stayed for the rain on the windshield.
Ah I see you’ve not put any floor panels in it yet so you can Fred Flintstone it if it breaks down during testing. Smart.
They fell off. Danger to manifold.
big brain plays
It’s so he can push it to get into gear when he’s by himself
@@TheAdatto i understood that reference lol
He raced Ja Rule. Always happens when you do that.
Oil: *exists*
4-rotor: I’m bouta end this man’s whole career
I remember being showed you by a friend, in high school.
That was when you just had the lambo and the 3 rotor in your garage.
It's crazy to see how far you've come. Thanks for making these videos.
EDIT: I too am lost in the sauce. Getting off work to this. The sounds alone in this are orgasmic.
Rob:Builds insane 4 rotor
Also rob: stock steering wheel because money
Awesomeness r6 Gaming 😁 gotta keep a piece of the original car lol
No it's so he can still say it's a FD RX-7... "See look at the steering wheel, that's stock FD!" Ha ha ha
Nevermind the carbon axles and shaft.
Because money? Or because he needs dat airbag for extra safety.
Awesomeness r6 Gaming prioritization 😂
Literally been waiting for this moment for years. I can only imagine how excited you are to share this moment with us! I’ve never liked a video before I’ve even seen it until right now!
This is the most post-nut clarity I’ve ever had
So are you confessing you failed NNN?
Anon omouse uhhhh
It was a real treat to see this car in person at SEMA 2019.
Admittedly I was completely ignorant to the build the whole time and was semi familiar with Rob as a RUclipsr. After looking up the build on Rob's channel when I back to the hotel room really was something else to see. Keep up the passion because the excitement you showed from the short test drive is so nice to see👍.
Normal Human Being: "How many Miles Per Gallon?"
Rob: "More than you can afford pal!"
I don’t seem to understand you... did you mean miles per gallon of gas or oil ? Both?
Don't you mean gallons per mile
anonymous what?
anonymous are you speaking English?
"this is actually sunny weather for people in Michigan" So true
Meanwhile, we're still sitting here waiting for the snow from Veteran's Day to melt. I wish we could have some of that "sunny" weather lol
Funny thing about this is that there's no snow in my town up here in the yoop. But we're supposed to be getting 6" to a foot tonight
I live 20 minutes from Rob's shop and a week ago it was still 90 degrees during the day. We have had santa ana winds a few times and the next two days will bring a bunch of rain (1-3 inches). It is really cold outside right now, almost 1am, at 50 degrees :)
Big facts lol
Michigan: its fall!
Michigan 2 days later: its winter now bitches
I've LS swapped like 25 RX7s... and I love this build. Awesome work Rob, this is fantastic. Congrats to all of you guys for the first proper drive.
If the timing is off and it sounds this good I can't wait to see what it's like when the timing is fixed
He fixed the timing
gsppuffer he just fucking said the timing isn’t set.
@@gsppuffer he made it better, but its still significantly off of optimal right now
@@gsppuffer did you even watch the video
Sabba7h it’ll actually sound a bit quieter when the timing is optimised.
Retarded timing makes for a loud exhaust.
Tesla: let's make the world more healthy and have quite electric cars.
Rob: laughs in rotor noises
Hear me out, instead of a 6 rotor: two parallel 3 rotors.
Too dumb to fail.
One in the front one in the back 👀
Make it a W6 rotor....only there is no W....
Same result with twice manifolds. I like it because it's stupid
ruclips.net/video/Q2IFWveYBRs/видео.html
Thered no way a mortal car guy could handle two 3 rotors singing in unison. Better put it in a truck and call it fat lady cause when it sings hearts will stop.
congrats man you deserve it. Hope you get it tuned out and running good soon. Been killing it on this thing.
Can’t wait to see this thing open throttle sideways on a track
Waiting will definitely be involved. 😆
i dont think its going to be sideways
AriLeblance they can easily engage and disengage the power to the front
Currently it’s only rwd
Rob has stated this
Furthermore they wouldn’t give it 40* of steering if he didn’t have plans to fucking seeeeennnnnnndddd ittttt
Regardless, He should just send it for the memes
@@MyLonewolf25 The suspension geometry was based on hoonicorn so I hope there will be some shredding
"Never done hard drugs" key word hard... Just like me after all the rotary noises
Ive never done hard drugs either. Only cocaine and acid. I stayed clear away from that marijuana stuff.
everybody knows heroin doesn't count
Premieres in 24 minutes... Fasterproms AWD s10 first drive video is 24 minutes. Perfect.
I just got done with it and 1 min to go here.
That was my thought exactly lol
Jimmy Davidson lol I just watched that too
Yooo me too
Finnish the DAHM thing
Yea sure rob i totally believe that this car is fully emissions legal, “with catalytic converter and everything”
"Hey Rob, where's the 4 rotor?" Cant tell you how many times I've read that comment. No more
FACTS💯
For real lmao now they can shut up
“Hey Rob, where’s the 6 rotor?” :)
"How many miles per gallon does it make?"
4 Rotors: *"No"*
@Deep hug 2039 if the parts ship ups
At that stage you get SMILES per gallon, not Miles bahaha
@@jamienielson4340 aww you're being too optimistic
i bet it idles a gallon a minute
It burns more oil then most cars burn gas..
“For legal reasons, that was a joke.”
I was like what???? Then he said it two seconds later
I don't think you have smiled so much except for the last 2 videos. Happy for you man. Happy for the team. Thank you for sharing.
there'd better be some brapping this time
Oh there's a lot of brapping in this one
@@ThiagoCariasChannel wasn't enough brapping video is 6/10
*braps intensifies*
@@ThiagoCariasChannel Yes! Yes there was. My need for the braps has been satisfied,
I’m so proud of you guys, I’ve been with this build about every step of the way, and I starting tearing up when I saw her Rolf out of the garage, thank you for this amazing build and journey, and I’ll continue to watch this beast evolve
I’m on a flight as we speak I just saw this video pop up with headphones on and I yelled “OH YEAH” way louder than I realized lmao. OH YEAH
Can't wait to see him dump the clutch and launch into space
ADEBISI ADEBISI it does fly you stupid nitwit.
ADEBISI ADEBISI r/woooosh
@ADEBISI ADEBISI r/woooosh
"While I was in the bathroom celebrating" uhhh... what? 😂
L8 APEX you know what hes doing in there right?
I'm pretty sure we all know what he was doing
rob you fucker, hes failed nnn bc of the orgasmic sounds of the 4 rotor
also check out detroit 2 strokes, idk why but the music they make is amazing
I was at full mast so I know he was
i imagine with the 4 rotors vibrations would cause him to get a little happy.
Rob Dahm 2019: Running & driving turbo 4 rotor
Rob Dahm 2029: Running & driving turbo 6 rotor
Rob Dahm 2039: Running & driving quad turbo 16 rotor
ruclips.net/video/Bpne1Vhhwkg/видео.html. There is a 12 rotor in this video. 11:45min. Rob it's your next project. Screw a small turbo 6 rotor, go big or go home with a turbo 12 rotor!!
If it’s a 4 rotor does that make it a 4 banger lol
@@daevid21 technically it's a 12 banger
You’ve obviously never had a huge project car. Shit takes time.
Virgin
24 roToR
*rob dahm* “this is my FD3S 9 Rotor”
l L0ST_-EXE l I won’t live to be that long
More like *Rob Dahm Junior*
I stumbled across this channel after the rotary vette, and I’m completely hooked. I can’t wait to see what happens next. Congrats Rob!
Perfect timing for an Australian. 11:00 AM premiere!
4pm us west coast
@@IdealContracting 8:11 NYC
@ 4:58 “Perfectly clean legal emissions” 🤣🤣🤣👌🏾 “catalytic converter and everything” 🤣🤣🤣👌🏾. RIIIIIGHT!
3:08
I can't wait to hear the 2 step on this thing and to see you street race in "Mexico"
I'm not crying, YOU'RE crying, Shut up.
That was pure, unadulterated awesome. Truly a thing of beauty.
I can't imagine how excited you must be when all of us are this giddy!
Rob looks like he’s turning into Wolverine without a haircut
Rob, Major props to you and the team - LOVE the sound and appreciate the work it takes to get there!!
I wanna see this and the hoonicorn tied together doing an awd burnout/ tug-o-war
and the hoonitruck to take on the winner
@@MitchFromSyd Now i really need to see this happen
MITCH N u crazy 4rotor for the win
@@kangarojack3814 my bet after all this hard work he don't want to tug war his baby. We're even lucky to see rob take it to trackday.
Ardi Januar it’s truly beautiful but if you build an AWD 4-rotor RX-7 and don’t drive it, you’re keeping it from its true purpose.
At3:30 when you have no words, can’t explain! In all congratulations on how far you have come, a lot of us can’t wait to see you ripping through the gears ⚙️ 👍🏾❤️👌
9:07 - 9:18 sounds aggressive like an Aventador, when it slowing moving through some space, throttle being taped. Also this is awd setup, in tire size makes the car look bigger beefer, & looks fantastic being lowered with suspension as well. For sure it’s in a special category like lambo, if not better because of how Rob has customized to be the only one in the world.
You cant compare a 4 Rotor to a Lamborghini V12
Yeah, the 4 rotor is clearly far superior.
best part was at 2:19 when the neighbor closed his door
They should put a pneumatic closer on that door because there's going to be a lot more of that 😂
Dahm I’ve been dying to see this happen but I’d love it even more if the boost pipes were fitted.
Why's he so happy driving a NA car around? Gotta love the no load break in, too. Love ya, Rob.
"i can't believe it's done, it's been so long!"
bad obsession motorsport: "hold my tea and biscuits"
Captain Zoll im not getting the reference
@@BlazeBeats Project Binky
Binky is actually pretty close then they decided to do the escargo to transport it first 😭
My 76 Mazda Cosmos Restoration: "bitch please"
@@The_one_below They were like 'fuk, if we finish Binky then we won't want to start another project and we'll lose all our viewers'
Really happy about this! Rob you've been busting your ass for a while now, really happy about the fact that you've reached success!
I had chills going through my body and goosebumps throughout this whole video0
Congrats! You have done it! The sound of that beast is just insane! Had a smile on my face during whole the video! Thanks man and I hope to see it in person one day🤘
Hear me out...75 rotor!!!
It's what will power Elon musk star ship
So, basically you want 25 three rotors on one car?
Carl Computer Fuck yeah! It’s gonna look a little silly, I’ll admit, but it’ll rip!
This is what will get us to Mars.
I've been watching since the begining and to see how far you've come with this. I'm stoked for you my dude!!!
“This car has perfect clean emissions, catalytic converter and everything...” 🤣🤣🤣🤣🤣
Lmao love me some zero emissions vehicles
lol said the guy with the quadruple rotary blowing visible smog just idling around the parking lot
Alternative facts lol
@Swampy I must have imagined that smoke coming out of the exhaust which is obviously massive amounts of unburned hydrocarbons probably mixed with a healthy dose of carbon monoxide.
@Swampy Yes and partially burnt oil is a very clean and healthy thing to breathe. You might want to look up what "unburned hydrocarbons" means.
The point about China or India is moot and textbook deflection. This car clearly emits massive amounts of harmful exhaust emissions and it is no where near compliant with emission regulations. Whether or not India is worse you would not want every car in your city running like this, it wasn't that long ago that LA was permanently covered in a cloud of smog and they didn't even need many rotaries on the road, just very lax emissions regulations for regular piston engine cars which are still no where near as bad as this, if every car in America was a rotary (like this one, without any real emissions control systems), well I hope you like asthma, lung infections and cancer.
Dahm im from Argentina, there is maybe 5 or 6 rotor engines here! but i love your 4 rotor, i wish you all the luck in the world!
"YOU MADE THE GODS CRY, ROB!" "😭😭😭😇😇😇!!!"
Congrats rob! It’s been a long time coming and happy to be able to watch your progress from afar.
Damn. Feels like just yesterday when a certain shipping company lost your 4 Dorito. Now its almost complete.
My opinion.. This is the best sounding car.. in the world. I don't need to have heard em all to know perfection. This is it. Its nearly beyond subjective opinion given the appropriate context. Its a visceral, raw, untamed symphony of craftsmanship, and human ingenuity, melodically on par with any orchestral piece of classical music. Congratulations on life rob.
Its a fast and furious transmission!
Looks at missing floor pans.....lol
Warning!!!
Danger to Manifold
I think you are my biggest inspiration in the engine building game because you
1: Get shit done
2: You do whatever the hell you want
3: You do crazy shit no one has ever done before
I got done with my racing tractor that I've been building for just over a year so it's a TEA 20 from 1955 and I built the original engine with shaved head (4,5mm), professionally ported head, re ground cam and stiffer valvesprings. It worked like a charm and I got fourth place in front of swapped turbo diesels even with stock intake, exhaust and carb. Keep doing what you are doing and you will continue to be the best video creator on RUclips
1:30am ... i can wait :D
LOL BRO WTF UR LATE
@@Gynkys worth it
I'm so happy to see this thing come together, maybe not in time to race Rob Spaghetti but perfection takes time. I respect the fact that you don't cut corners and when you do you'll go back to tight them up and its usually because your viewers want to see something.
I just bought one of the T-shirts, I can’t wait for it to come in!
I absolutely love fact that everytime you fired her up the captions came up and said "[music]"!!!! Sweet, sweet, 4 rotor music!
Rob: "The timing is lagging"
Me: No its wetarded.
👏👏👏👏
Lol!
Got to love that rotary sound, it's a whole other ball game.💯👍👍👍
0:24 annnndd uncontrollable smile forms on my face ...
Genuinely pleased for you Rob well done.
When he stopped the car there was only one thing in my head "dahm" 😂
a world first is an undeniable mark in progress. Congrats and I am looking forward to more progress videos.
Amazing. I hope when this projects is finished, all the specs, parts, and blueprints are open sourced. I would love to build a replica someday if I am ever rich.
Poppa Dahm make this happen. I know there was a lot of custom fab but if it was all documented and measured make it available!
Congratulations Rob on your accomplishments! Its awesome to see . I'm a rotary enthusiast as well!!!!
"celebrating in the bathroom" love you dude
omg, the way it echos throughout the complex, ahhhh just beautiful
That ending was brilliant “lost in the sauce” 😂😂
What a day to burn into your brain. All that blood sweat and tears culminating into this day... Crazy beautiful sky, rain coming down after it breathes life. This thing is like you summoned a mythological creature. Congratulations man, can't wait to see more of it.
y'all remember how long this took - atleast its here, but now we can't say he never actually made the 4 rotor RX7
The rotary sound was fun when I was in school. I dreamed of the first Mazda RX-7 car. I fell in love seeing the Mazda RX-7 in the fast1 movie with Tokyo drift and in the end after I graduated from college, the dream came true. Now I have a Mazda RX-7 sprit R last edition even though in my country the price is two times.
Greeting from Indonesia🇲🇨
the car majestically glides on a nimbus cloud lmao
Joined in for your C5 build bc I thought you were insane but this...this is next level, inspiring work Rob, brap hard
"While I was I the bathroom celebrating" 😂😂😂 golden
Although i dont know you personally, we can all see the passion that went into this dream of a car. You are an Inspiration to everyone that has a project car to get up off their asses and get it done, thank you for that
Amazing! Now I can die in piece, so that my body may decompose into great oil for this glorious car.
It’s so enjoyable to see the happiness in his face. The bliss he was feeling after such a long time working on the project. This is what happens when you don’t give up!!
Other than a top fuel dragster that is the best sounding car I've ever heard
Chancey Mclaurin look into some of the F1 cars of the 90’s. Ungodly noises 🤤
Check out The Stradmans channel. He bought a street legal Ferrari race car. It sounds insane!
Look up mazda 787b 700hp na rotary
God that thing rips
Bmw Judd v8 hillclimb. Thank me later.
Watching the progress in every video and then hearing it alive and healthy is the most satisfying thing Rob. Will we see more fine tuning of the steering hiccups, wastegate solution, boost piping etc?
"It's got a Fast and Furious transmission." I LOLLERED!!!!!!!
but.. how fast and how futious?
You're doing the 787B proud with that glorious brap through a side exit exhaust. This isn't even my car and I'm so thrilled to see it moving under its own power.
Dahm i got physics test tomorrow yet im here
Priority done right
Randy_bosss I like the “dahm” pun 😂
Lmao imagine having a physics test tmr. I have one too. Good ole mr smith
It sounds so damn good Rob. Great work on getting it moving under its own power.
When your daily doesn't start but you have an awd 4 rotor in the garage
debit card at the gas station: ight ima head out
I'm so happy for this dude...so many haters doubted...good job rob
"Rob, where is the 4 roto....., oh ok."
Well done Rob to do what you have done in 3 months is amazing
rob always seems like he is stressed and suffering hahaha
4/6 Rotor in a C8 would make for a cool follow up project. Congrats on the progress Rob, keep up the good work.
Hasn’t this guy been building this car since RUclips started?
actually there are historical records of cave drawings of a man beside a stripped rx7 found on Neanderthal habitats that is believed to be rob building his car
Been following you since 2015. Never been happier for you. Congrats dude
Could you imagine Rob getting pulled over in this thing ahshah
Not possible, even in dead stop traffic I bet that turbo can produce enough thrust to lift the car over traffic and keep running
@@nicholaswaskan8776 hahaha thing's bigger than my head
Just bought a shirt to support you Daddy Dahm. Keep up the 4 Rotor shenanigans!!