Is writing the 'report definition' out after the simulation possible? I have .dat files that could check the value, but I can not find a way to write it out.
Hi and thank you for your question. Please use “Report Files” just below “Report Definition” in the project tree. In Report file you can create a file based on any Report Definition that you have created. Should you have additional questions, please reach out to us at info@simutechgroup.com or explore the SimuTech Skills Center skillscenter.simutechgroup.com/ssc/landing-page
Hi atahussainpk, feel free to drop us a note at info@simutechgroup.com if you're interested in our consulting services and we'd be more than happy to help! Otherwise there is the ansys student community to find posts/articles: studentcommunity.ansys.com/
how to plot IV curves and power curves for PEMFC fluent for various step values like 0.7v then 0.6V, then 0.5v and so on? ......when we start running iterations like 100 or so can it be changed while the iteration is running or need to do one by one then transfer data to excel and plot the graphs myself?
Thank you for your question! Please send a note to info@simutechgroup.com if you are interested in our consulting services or you can check out the Ansys student portal at studentcommunity.ansys.com/
I am trying to plot the moment about the shaft of my reactor vs time. So I created a report definition for the moment and put the axis as 0,0,1 (z axis) and the moment centre as (0,0,0) which is the centre of the bottom of my reactor, and selected the shaft's named selection. But the moment doesn't reach a steady state constant value after sometime (although I plotted turbulent kinetic energy as a function of time, and it reached a steady state value constant value). Can you please tell me how can the moment's value be made to reach a steady-state value?
Hi Ashutosh, feel free to drop us a note at info@simutechgroup.com if you're interested in our consulting services and we'd be more than happy to help! Otherwise there is the ansys student community to find posts/articles: studentcommunity.ansys.com/
Hi Thank You so much for your tutorial. But can you explain on how do I read an OUT file? because I want to read and move the results to excel. Thank you
Hi Stefano, feel free to drop us a note at info@simutechgroup.com if you're interested in our consulting services and we'd be more than happy to help! Otherwise there is the Ansys student community to find posts/articles: studentcommunity.ansys.com/
How to display updated contour of results, such as temperature contours, during solution, rather reporting an average, max, min, etc. My goal is to see how temperature solution develops for the entire domain rather selected areas.
Thank you for the comment mazamin. If you are interested in our consulting or mentoring services, please send us an email at info@simutechgoup.com or you can check out the Ansys learning hub here: www.ansys.com/services/ansys-learning-hub
Hi Aishwarya, feel free to drop us a note at info@simutechgroup.com if you're interested in our consulting services and we'd be more than happy to help! Otherwise there is the Ansys student community to find posts/articles: studentcommunity.ansys.com/
Hi Krishnaraj, feel free to drop us a note at info@simutechgroup.com if you're interested in our consulting services and we'd be more than happy to help! Otherwise there is the ansys student community to find posts/articles: studentcommunity.ansys.com/
Hi Akash, feel free to drop us a note at info@simutechgroup.com if you're interested in our consulting services and we'd be more than happy to help! Otherwise there is the Ansys student community to find posts/articles: studentcommunity.ansys.com/
Mahn, you are a lifesaver, I have been looking how to do this, your video was really helpful. thanks a lot
Thank you..... Thank you sooo much . You saved our valuable time now I can sleep peacefully, trying to figure this our since last 1 hour.
Glad it helped
Very informative tutorial. Thank you
Thank you for your comment!
found out it very useful. Thanks for sharing your knowledge.
hi i found in my results after the simulation the eddy viscosity i want to see also the molecular viscosity. How can i do it ?
How do we split the plots into different screen to view multiple plots at the same time?
Is writing the 'report definition' out after the simulation possible? I have .dat files that could check the value, but I can not find a way to write it out.
Hi and thank you for your question. Please use “Report Files” just below “Report Definition” in the project tree. In Report file you can create a file based on any Report Definition that you have created.
Should you have additional questions, please reach out to us at info@simutechgroup.com or explore the SimuTech Skills Center skillscenter.simutechgroup.com/ssc/landing-page
What is the version of Ansys software you used?
Hi atahussainpk, feel free to drop us a note at info@simutechgroup.com if you're interested in our consulting services and we'd be more than happy to help! Otherwise there is the ansys student community to find posts/articles: studentcommunity.ansys.com/
how to plot IV curves and power curves for PEMFC fluent for various step values like 0.7v then 0.6V, then 0.5v and so on?
......when we start running iterations like 100 or so can it be changed while the iteration is running or need to do one by one then transfer data to excel and plot the graphs myself?
Thank you for your question! Please send a note to info@simutechgroup.com if you are interested in our consulting services or you can check out the Ansys student portal at studentcommunity.ansys.com/
I am trying to plot the moment about the shaft of my reactor vs time. So I created a report definition for the moment and put the axis as 0,0,1 (z axis) and the moment centre as (0,0,0) which is the centre of the bottom of my reactor, and selected the shaft's named selection. But the moment doesn't reach a steady state constant value after sometime (although I plotted turbulent kinetic energy as a function of time, and it reached a steady state value constant value). Can you please tell me how can the moment's value be made to reach a steady-state value?
Hi Ashutosh, feel free to drop us a note at info@simutechgroup.com if you're interested in our consulting services and we'd be more than happy to help! Otherwise there is the ansys student community to find posts/articles: studentcommunity.ansys.com/
can you show how u set your reference values?
Hi Thank You so much for your tutorial. But can you explain on how do I read an OUT file? because I want to read and move the results to excel. Thank you
Hi Stefano, feel free to drop us a note at info@simutechgroup.com if you're interested in our consulting services and we'd be more than happy to help! Otherwise there is the Ansys student community to find posts/articles: studentcommunity.ansys.com/
@@SimuTechGroup useless ansewer dipshit
change the extension from .out to .xy and then open it in excel
How to display updated contour of results, such as temperature contours, during solution, rather reporting an average, max, min, etc. My goal is to see how temperature solution develops for the entire domain rather selected areas.
Thank you for the comment mazamin. If you are interested in our consulting or mentoring services, please send us an email at info@simutechgoup.com or you can check out the Ansys learning hub here: www.ansys.com/services/ansys-learning-hub
How to calculate mass flow rate around impeller, how to create surface integral for velocity field please help
Hi Aishwarya, feel free to drop us a note at info@simutechgroup.com if you're interested in our consulting services and we'd be more than happy to help! Otherwise there is the Ansys student community to find posts/articles: studentcommunity.ansys.com/
please help, i cant find the deport defenition window in ANSYS fluent 14.5, please respond
Hi Krishnaraj, feel free to drop us a note at info@simutechgroup.com if you're interested in our consulting services and we'd be more than happy to help! Otherwise there is the ansys student community to find posts/articles: studentcommunity.ansys.com/
What is the software to open .out file
Notepad, Edit Pad Lite, word. just right click with the mouse on the file then choose open with
hi that is good movie/can make movie for how work or creat monitors in fluent for models? /thanks
Thanks man
how to generate data for a specific point
Hi Akash, feel free to drop us a note at info@simutechgroup.com if you're interested in our consulting services and we'd be more than happy to help! Otherwise there is the Ansys student community to find posts/articles: studentcommunity.ansys.com/
My quiz is in 5 hours boys. Wish me luck
Thank You