Wow, sure wish I had seen this video a couple of days ago! I had the exact same problem with my Sharp MX-M200D. It would have really helped. Had to figure it out on my own. It looks VERY similar inside. The collar on the resistance roller was broken the same way. I used a gel Super Glue to glue it back together. I see that this part is actually pretty easy to get (it must break for a lot of people). Kind of a time-consuming job taking things apart, and putting them back together. My machine is about 14 years old, so I cleaned and lubricated the gears while I had it apart. I wish I had also changed the fuser drive gear, while I had it apart. That gear is starting to wear out on my copier. As part of this repair, I also took apart the fuser, replaced the rollers, bearings and gear on that unit, lubricating the bearings. Machine works like new, again. Keep thinking it's time to replace a 14 year old machine like this, but I've been able to keep it running, so far.
I have a ARM 205 with exactly the same jam in the upper tray. I followed your excellent repair and good camera by the way. I had exactly the same part broken and was able to repair. My problem now is that only copies half the page. Any suggestions?
check mo mga sensor yung dinadaanan ng papel sa ilalim at sa taas at yung mga kuntil nya sa sa mga sensor may papel yan na mallit siguro na naka jam diyan
Hi, paper gets stuck in my printer too: I followed your instructions step by step. I have unfortunately verified that my problem is not the spare part you repaired because mine is intact. in your opinion what is my problem?
selamun aleykum I have a Saharp 5618 machine. I am constantly getting a paper jam warning even though I have cleaned the unit and there is no problem in the paper tray. How can I get rid of this warning?
Two problems 1. Start switch doesn't activate to process any operation. 2.doesn't pickup paper from tray for print 3. auto reverse photo copying doesn't carryout...
عشر دقايق نشاهد عمليه حشر الاوراق في الكاسيت ولم تقوم بتنظيف السنسور وربلات سحب الاوراق بل قمت فتح زجاج الاسكاينر و هذا يعد استخفاف بالمشاهد وتضييع للوقت
Galing mo tlga boss gnyan pla itsura sa loob oh may nakaipit na paper kailangan tlga e check minsan
Salamat ☺️ geng
Ayus na ayus talaga son ang pag aayus mo ng printer katulad nyan Yung mga papel na naiipit at napapa gana mo ulit. Keep sharing.
Thank you 😊
Wow, sure wish I had seen this video a couple of days ago! I had the exact same problem with my Sharp MX-M200D. It would have really helped. Had to figure it out on my own. It looks VERY similar inside. The collar on the resistance roller was broken the same way. I used a gel Super Glue to glue it back together. I see that this part is actually pretty easy to get (it must break for a lot of people). Kind of a time-consuming job taking things apart, and putting them back together. My machine is about 14 years old, so I cleaned and lubricated the gears while I had it apart. I wish I had also changed the fuser drive gear, while I had it apart. That gear is starting to wear out on my copier. As part of this repair, I also took apart the fuser, replaced the rollers, bearings and gear on that unit, lubricating the bearings. Machine works like new, again. Keep thinking it's time to replace a 14 year old machine like this, but I've been able to keep it running, so far.
поясни, что за воротник сломался? как он выглядит?
yan ang dati kong hawak before ako mag ibang bansa galing mo sir
galing talaga idol marami na akong nalalaman sa mga vid. mo laking tulong talaga.
Thank you 😊
galing mo pala umayus ng mga printer boss salute
Salamat bro
Yun mismo to bro, solutionnpara sa paper jambsa printer👏👏
thank you
ang galing nman po ser salamat sa pag share ng inyong kaalaman
wala po akong alam dyan
pero ngayon may mga natutunan ako dahil sa video nyo
Thank you 😊
New subscriber here, maraming salamat sa info video kabayan.didnt skip ads 😊
Very good video.. Worth to watch.. Ang galing talaga Jaytech..
Thanks for visiting 😊
Start na ako sa pa harang kuya Jeytech.. galing mo talaga sa mga ganyan kuya
Ang galing linis ng pag ayus matagal din pala bago mabuo
Yes hirap din haha 😄 thanks 😊 for visiting
sana all marunong gumawa,full watch done..
I have a ARM 205 with exactly the same jam in the upper tray. I followed your excellent repair and good camera by the way. I had exactly the same part broken and was able to repair. My problem now is that only copies half the page. Any suggestions?
half copies problem check the coil or re insert properly the drive gear
@@jaytechpinoychannel Ill have to do it over. I wonder if I moved the gears while cleaning? Thanks for your help
hi jay thank you for sharing tips on how to remove paper jam
I like the content and will follow your channel
Awesome, thank you!
Very informative video. Keep it up sir.
Thank you 😊
Thank you 😊
Superb job
too old machine my aalso same problem?
what is the two paste you use?and for glue or lubricating function? thanks before
I can use epoxy paste
Thank you so much for you ❤
Sir new subscriber.. Sir ask ko lang un sa model Ar 5620N pag open p lang nka jam na agad pero wla na papel ano po posibleng sira thanks
check mo mga sensor yung dinadaanan ng papel sa ilalim at sa taas at yung mga kuntil nya sa sa mga sensor may papel yan na mallit siguro na naka jam diyan
Maraming salamat sir
Hi,
paper gets stuck in my printer too: I followed your instructions step by step. I have unfortunately verified that my problem is not the spare part you repaired because mine is intact. in your opinion what is my problem?
good skills you have watching here
Thank you 😊
selamun aleykum
I have a Saharp 5618 machine. I am constantly getting a paper jam warning even though I have cleaned the unit and there is no problem in the paper tray. How can I get rid of this warning?
check all sensor maybe they small paper or check the position of actuator maybe misaligned.
can I get the basic driver of Sharp AR5316 for windows 7 64 bit
you search google i think its available
A copy with the same model that I turn on makes a paper jam. I mean, pressing the power button makes an error. You can not guide me,plz?
you can check fuser gear or solenoid gear maybe they have damage.
Thanku
Good job sir
So nice of you
عند خروج اول ورقة ترجع نفس المشكلة بعد صيانة الترس
I want AR5316 sharp Xerox machine CD drive
you can try download in google
thank you
Awesome big like here ;)
Thanks 😊
Sir. Ask ko Lang. Di ko masyado ginagamit printer ko. Possible ba Yan na maging dry ang ink at Di na sya gagana.?
Di naman Ganda.. as long as Naka Tago NG maayos at safe.. Or Naka lagay NG maayus is Maga gamit din sya ulit.. About sa ink di Yan mag d dry charoot.
Yes maam possible na mag dry sya palit ka nalang ulit ng ink nya
Two problems
1. Start switch doesn't activate to process any operation.
2.doesn't pickup paper from tray for print
3. auto reverse photo copying doesn't carryout...
sir you need general cleaning your machine and replace consumables parts if you dont now how to repair, call service technician near your city
Margie Cajes here dikit po sau
thanks
wow thanks for this
Thank you 😊
ang galing naman //silverkaventuresmembers overnightplayallperks support
thanks you
PL here kapatid
thank you
the problem on minte 17-30
عشر دقايق نشاهد عمليه حشر الاوراق في الكاسيت
ولم تقوم بتنظيف السنسور وربلات سحب الاوراق بل قمت فتح زجاج الاسكاينر
و هذا يعد استخفاف بالمشاهد وتضييع للوقت
Hello po simulan kita here kalerski vlog po
Mar9 magdamag po ulet
Start Switch not working
I want sharp machin technician number
you search near your city
Wala akong alam sa pag gamit ng printer kahit meron kami nyan
Practice ka maam hehe 😅
🙏💥💥💥❤❤❤ THANK YOU SO MUCH from 2024! You are a savior! Tell me, are such parts available for sale, what is their number (article)?