F@king thanks man! I was spending time plugging RAMs in and out for a long time. Before giving up completely, this video just was what I found out. By reinstalling processor daming fixes the problem? Dam it worked! Thanks man, really a life helper.....
thank you so much for this i came back here to say that it worked out for me on an msi-h310 and to tell everyone not to use alcohol unless you're 100% sure it is 99% pure and not diluted to 70% coz you're going for the cpu socket ... i did use 70% alcohol but ended up with my motherboard not working for 2 days until all the moisture was gone completely so a cleaner fluid like in the video is a must ....
Thank you so much! I been figuring it out for 3 weeks and this the solution that really worked for me. I just had to fix my processor pins. My ram was fine :)
You were absolutely correct, my friend. I had bent pins in the terribly designed processor slot and slight water ingress under the processor. All cleaned and straightened up and works fine. Cheers!
This happened to my board too. Now I'm down with 8GB ram. And I don't wanna spend money for my rig anymore, because I've already spent too much for it.
If you spray this while the computer is on, not good right ? I tried to spray my CD Lens while the Cd was plugged in to USB, now it doesnt work. I guess its better to spray when everything is off?
I have a new MSI Mag b550 pro tomahawk wifi board and I thought I had a bad stick of RAM at first so I ordered 2 more. Its also two beside rach other b1 and b2. I could probably figure it out eventually even if i have to replace some components but its under warranty so im not touching it. If I put the ram in like it's supposed to go I get a red CPU light and no boot. I'm going to talk to MSI today and see what they say. I just hate having to tear my rig all the way back apart after I just got it all looking how I wanted. If MSI can't give me a answer I guess I'll send it back but I'm definitely going to look at my CPU very well. It's not a cheap one a ryzen 7 5800x but wouldn't a diagnostic test show if it's a RAM slot issue or a CPU issue. Also I did put a little too much thermal paste when I assembled it so some may have gotten to the pins. Im also going to yry my old cpu a ryzen 5 3600 and see if it will boot then before i tear it all apart and send it back.
I have same issue. thank you for this video. I will try this hopefully it will work for me also. Thank you for explanation on your methods. Salamat boss
Sir ask ko lang ginawa ko na lahat ng method pwedeng available na gawin, rineseat ko lahat ng components like GPU, CPU, and RAM and then lininis ko na rin yung RAM and yung Slot gamit ng lighter fluid tyaka ng eraser. pinalitan ko lang thermal paste ko ganito na di na gumana yung slot b1 ko. so pwede ko na ba i conclude na dead na talaga yung DIMM slot b1 ng MOBO ko? gumagana naman sa slot A1 pero pag sa Slot B1 na wala na A320m gamit kong mobo....
Salamat nang madame boss! Money saver & Life saver, tagal na kong naghahanap nang kasagutan dito sa youtube akala ko sira na talaga MB ko muntik na kong mapabili nalang. Same pa tayo nang MB kaya ayos talaga!
so ibig sabihin may na bend na pins sa cpu socket and my chance rin na gumana uli pagka ginamit ko yang cleaner? Kasi ganyan rin nangyari sa second ram slot ko...
I think I have faulty ram slots.. I did memtest ram and they are fine.. tested the ram on the slower slots and pc works fine, on the other slots I get blue screen memory managment.. what do I do ?
@@JojitManlapaz not yet , Im afraid to do more damage.. my mb is just 2 years old, and I dont let dust acumulate.. I'm not sure it will solve anything, its beyond my technical abilities
Hello sir. Sa AMD po pwede din po ba same process po ng ginawa mo sir ? Same problem po kasi sa pc ko one stick lang ang binabasa. Pag dual stick na ayaw na namamatay po.
Sir yng isa ko po ram slot ksi bigla nagamoy sunog tpos nung trinay ko po lahat ng ram slot ayaw na gumana pero po nag on pc ko lumalabas lang po No Video Output
sir yung slot 1 ko sira, ayaw mag detect kagaya nyan so yung pins slot po pala ng ram yung lilinisin para mag detect na yung slot 1? meron din ako nyan contact cleaner pero sa ram slot ko lang nilagyan ng contact cleaner hindi sa proc slot
As ive said po check processor socket for bend pins and try to clean it using contact cleaner, ang memory controler po kasi nasa processor wala po yan sa motherboard, once di maganda contact ng processor sa mga pins ng motherboard malaki po chance na di umandar ang mga ram slot
I have the same problem but i just can't fix it..i just can't fix pin that is bent.. whenever i try to make it go straight it just bent as soon as i lift my needle and i just cant make it go straight..what should i do can someone help
maraming salamat sayo sir ..dahil sayo nagkaroon ako ng idea para ma fix ko yung mobo ko ... akala ko talaga sira na slot1 ng RAM ko .. hndi ko tinulugan yung pc ko ng hndi naaayos ,, 2:26 AM ko na sya napagana ulit hahaha ..you deserved more subscribers !! God bless sir! more blessings to come
same problem sa z390 ko pero sinubukan kong gayahin lahat ginawa mo pero wala pa rin eh...ano kaya prob? kahit slot 1 and 3..ayaw eh... if 2 and 4 wala din...ang slot 4 lang talaga gumagana...
thank you boss. first time ko po kasi magpalit ng cpu cooler tas naging makalat yung thermal paste. nung tinry ko iopen biglang di gumana yung 1st ram slot kaya akala ko defective yung mobo ko. then tinanggal ko yung cooler tas nilinis konte yung area sa socket saka yung cpu mismo tas binalik ko yung stock cooler, gumana na ulit yung ram slot! salamat po ulet papa rma ko na po dapat mobo ko eh hahahahaha :)))))
Boss, pwede rin po ba to sa newer motherboard? Kasi yung X570 ko nagkaproblema sa RAM slot eh, pag dual channel di na nagdidisplay, pag isa lang sa isang working slot, okay naman. Pwede rin ba to sa ganyang method?
pwedi pa wd40 ilinis? nag reseat nako ng cpu ko pero di pa rin na dedetect yung isang slot. other slot is working both ram is working but sa isang slot walang display
Bhai mere PC me ram ki problem hai. Bhai ram lagata hu to 2 minute chalta hai fir koi ek perticular color aata hai or PC bhi band nahi hota Please koi batao Kya problem hai. 1-2 minute chalta hai fir koi color aajata hai please help me 😭😭🙏🙏🙏
good day sir pwede po magtanong about sa problem ng pc ko, specs po ng pc ko ryzen 3 2200g, asus prime b350, 8gb ram hyper x, gtx1050 ti, 500watts 80+white psu. ang problem nya po ay nag aauto shutdown tpos kapag ioopen ulit ayaw n mag turn on pero nailaw yung board nya,, tpos sa ram slot nya 1 dimms slot ang gumagana ayaw sa ibang slot. kapag na open naman po sya minsan maghahang na po sya. sana po matulungan nyu po ako..
Sir pano po ayusin to pc ko 2gb ram po sinalpak ko gumagana nabubuhay monitor and keyboard pero pag 4gb ram ayaw mabuhay monitor at keyboard na try ko na din po ibang 4gb ram pati sa kapatid ko na nagana talaga ayaw gumana sa pc ko
Nice boss...ganyan nangyari sa biostar motherboard ko...4 slot ram sya...2 slot nalang nagana...subukan ko to boss sa next na paglilinis ko ...salamat boss...
@@rigidhammer7376 hindi boss...iba pala sira nung sa akin...nagkamali ako ng linis...bended na yung ibang pins...kaya di na gumana yung isang slot ng ram...kaya nagpalit nalang ako ng mobo...
F@king thanks man! I was spending time plugging RAMs in and out for a long time. Before giving up completely, this video just was what I found out. By reinstalling processor daming fixes the problem? Dam it worked! Thanks man, really a life helper.....
thank you so much for this i came back here to say that it worked out for me on an msi-h310 and to tell everyone not to use alcohol unless you're 100% sure it is 99% pure and not diluted to 70% coz you're going for the cpu socket ... i did use 70% alcohol but ended up with my motherboard not working for 2 days until all the moisture was gone completely so a cleaner fluid like in the video is a must ....
Thank you, it turns out removing and re-installing my processor fix my RAM slot. I thought it was dead and I already browsing for used motherboard.
Thank you so much!! I think there was a thermal paste inside my chip lol
Thank you so much! I been figuring it out for 3 weeks and this the solution that really worked for me. I just had to fix my processor pins. My ram was fine :)
but how to fix socket pins?
@@fennec5447if you dont see any missing pin, Just clean it with isoprophyl alcohol, maybe there's dust in between.
You were absolutely correct, my friend. I had bent pins in the terribly designed processor slot and slight water ingress under the processor. All cleaned and straightened up and works fine. Cheers!
This happened to my board too. Now I'm down with 8GB ram. And I don't wanna spend money for my rig anymore, because I've already spent too much for it.
If you spray this while the computer is on, not good right ? I tried to spray my CD Lens while the Cd was plugged in to USB, now it doesnt work.
I guess its better to spray when everything is off?
Yes off, and let it dry a 2 minutes
thank u so much sirrr.. truly effective!!! reinstalling processor worked!! new subscriber hereee!!!
grabe ka bosss!!!! till now solid ng idea mo!!❤❤❤
Thank you po! Bibili sana ako ng 16gb na ram. Buti nalang ok na. More power po sainyo!
What are you using to clean?
Thank you sa video na to sir... Naaayos ko ung 6 motherboards ko sa shop using this technique👍👍👍
Hello I did the same thing. My slot started working but only for 1 day, and it was broken again. Do I need to reapply that spray everyday?
Kua, paano po kapag 2x4g ram ang nakalagay. Both working. Pero 4 gig lang binabasa. Working din naman po ang both ram slot. Nilipat ko, gumana naman.
may ganyan plang panglinis.. salamat sir try ko yan.. laging blower lng pang linis ko.. at dko binubuksan mga parts takot ako bka masiraan..
Galiiiing sir! Salamat
pwede bang 99% isoprophyl alcohol gamitin ko pang spray?
I have a new MSI Mag b550 pro tomahawk wifi board and I thought I had a bad stick of RAM at first so I ordered 2 more. Its also two beside rach other b1 and b2. I could probably figure it out eventually even if i have to replace some components but its under warranty so im not touching it. If I put the ram in like it's supposed to go I get a red CPU light and no boot. I'm going to talk to MSI today and see what they say. I just hate having to tear my rig all the way back apart after I just got it all looking how I wanted. If MSI can't give me a answer I guess I'll send it back but I'm definitely going to look at my CPU very well. It's not a cheap one a ryzen 7 5800x but wouldn't a diagnostic test show if it's a RAM slot issue or a CPU issue. Also I did put a little too much thermal paste when I assembled it so some may have gotten to the pins. Im also going to yry my old cpu a ryzen 5 3600 and see if it will boot then before i tear it all apart and send it back.
u got my main driver as ur spare cpu😂
Damn hell thats so sick
Removing cpu and cleaning the things there was actually the best fix now its working fine
Also i applied new thermal paste
what about amd motherboards?
YOU DID NOT STATE THIS IS NON-ENGLISH TUTORIAL.
yo dude theres Caption 😂
tap CC
Y u mad
@@bsitworldwide2020 auto gen captions wouldnt work
Yung sa akin na detect niya 8Gb RAM pero 3.99 RAM lang ang usable. Bakit kaya ganun? Sinubukan ko na din sa MSconfig wala pa rin.
Ok lang po ba WD 40 contact cleaner ang ipang linis?
I have same issue. thank you for this video. I will try this hopefully it will work for me also. Thank you for explanation on your methods. Salamat boss
Update Idol? Nag work ba?
Update?
Ok lang ba kahit walang gamit na contact cleaner?
Sir nag lo loop na bsod Yung aken TAs nakalagay machine check exception sa ram slot Rin Po ba ito?
still helpful. thanks a bunch
Thank you very much sir. Effective
Salamat po boss di na ako gumamit nung spray cleaner nag brush lang ako sa surface nang processor socket Salamat po Marami boss 🤘🍻
Sir ask ko lang ginawa ko na lahat ng method pwedeng available na gawin, rineseat ko lahat ng components like GPU, CPU, and RAM and then lininis ko na rin yung RAM and yung Slot gamit ng lighter fluid tyaka ng eraser. pinalitan ko lang thermal paste ko ganito na di na gumana yung slot b1 ko. so pwede ko na ba i conclude na dead na talaga yung DIMM slot b1 ng MOBO ko? gumagana naman sa slot A1 pero pag sa Slot B1 na wala na A320m gamit kong mobo....
It work bro on msi h110m pro, before just one slot ram is functioning…after both ram are good to go 😂😂 tq bro
will buying a 16gb single Ram help? I tried man nothing is happening
Went back here to give my Thanks, Like and Subscribe.
I was able to fix the exact issue I had with my old pc because of this.
Working na po sir, thank you
Maraming salamat po... May bago na naman ako natutunan..may bagong tech idol na naman.😃
Already subscribed..
ito lng ba problema ng 4th gen na MSI MOBO ganito din sakin wla post bumili ako ulit msi din mga ilang years same problem parin lol ma try nya to
Can you help me beacouse my motherbord vram and cpu blinking light. But not show on bio i did many time ram swap and 1 and 2 slot and still same
Best basic trouble shoot naman sir.. good job👍
Maraming salamat idol! Biglang ayaw gumana ng isang ram slot ko after ko mag repaste ng CPU, buti na lang napanood ko 'to at naayos na.
thank you i learn a lot
Salamat nang madame boss! Money saver & Life saver, tagal na kong naghahanap nang kasagutan dito sa youtube akala ko sira na talaga MB ko muntik na kong mapabili nalang. Same pa tayo nang MB kaya ayos talaga!
What if walang contact cleaner Boss?
Salamat bossing sa processor slot nga problema . Nilinisan ko at gumana nga yung kabilang slot. 😊
Nangyayari rin po ba yan sa mga ryzen?
Thank you, this actually worked, except i was using brake cleaner
Thanks po, pero chineck ko wala namang bent pin or broken pin, ano kaya yung ibang possible na sira nito? Amd a320 pro msi po yung mobo.
so ibig sabihin may na bend na pins sa cpu socket and my chance rin na gumana uli pagka ginamit ko yang cleaner? Kasi ganyan rin nangyari sa second ram slot ko...
update bro naayos mo ba?
I think I have faulty ram slots.. I did memtest ram and they are fine.. tested the ram on the slower slots and pc works fine, on the other slots I get blue screen memory managment.. what do I do ?
Have you try cleaning the mem slot?
@@JojitManlapaz not yet , Im afraid to do more damage.. my mb is just 2 years old, and I dont let dust acumulate.. I'm not sure it will solve anything, its beyond my technical abilities
Sir ask ko lang po yung isa ko pong slot dina kaka detect tapos yung isa naman nakaka detect pero nag turn on tapos nag turn off
pano naman sir pag nag power cycle lang?
Effective din kaya to idol sa laptop
Sir tinry ko to parang may nakita kong bent pins. Kaya ayaw gumana magkano po kaya yung pagawa nun? Thanks po.
Tanong lang sir pwede ba yung wd-40 Wala Kasi akong contact cleaner
Thank you from 🇺🇸 helped me %100 bless u
which language ?
Sir parehong problema sir...8gb ram sa simula pagkatapos ko linisin 4gb na lng ang bananas.. tapos mag beep pa...
Thank you sir. Very helpful. Subscribed!
sir pwede bang alternative ung acetone? same issue sa asus H81m-k ko sir, nuon nmn ok ung ram,.
Sir pano po pag 3 beeps po. Sa channel 1 slot gumagana po pero sa channel 2 slot di po gumagana. Kahit ayos po ang ram.
Nice channel. Learned something new!
I just changed ram and when i played my game half way the entire thing froze is it because of ram slot too?
yes, i've faced it too , maybe you need to clean or reseat the ram..
ano po yung bent pins?
Napapalitan po ba yung ram slot? Upgrade ko po kasi sana DDR2 to DDR3
Hindi po
Hello sir. Sa AMD po pwede din po ba same process po ng ginawa mo sir ? Same problem po kasi sa pc ko one stick lang ang binabasa. Pag dual stick na ayaw na namamatay po.
yes and konting ingat sa processor hirap makita dyan kung meron broken pin
@@JojitManlapaz Thank you so much sir 🙏
Napapalitan po ba yung ram slot? DDR2 sya upgrade ko sana sa DDR3
Pwede ba ung wd40 gamitin ?
gagana din poba to sa amd procy?
Sir yng isa ko po ram slot ksi bigla nagamoy sunog tpos nung trinay ko po lahat ng ram slot ayaw na gumana pero po nag on pc ko lumalabas lang po No Video Output
Yes mine msi din! Ganyang ganyan problem. Same slot din ang sira
Sir ano kaya problem nung sakin ayaw gumana nung isa 2x 4GB Ram pero isa lang nagana
sir yung slot 1 ko sira, ayaw mag detect kagaya nyan so yung pins slot po pala ng ram yung lilinisin para mag detect na yung slot 1? meron din ako nyan contact cleaner pero sa ram slot ko lang nilagyan ng contact cleaner hindi sa proc slot
As ive said po check processor socket for bend pins and try to clean it using contact cleaner, ang memory controler po kasi nasa processor wala po yan sa motherboard, once di maganda contact ng processor sa mga pins ng motherboard malaki po chance na di umandar ang mga ram slot
@@JojitManlapaz sige po sir ty, subscribed
ang galing mo idol salamat gumana na!!! next nmn idol kung papano mag upgrade ng pc ung mga binbili is compatible sa motherboards
I have the same problem but i just can't fix it..i just can't fix pin that is bent.. whenever i try to make it go straight it just bent as soon as i lift my needle and i just cant make it go straight..what should i do can someone help
salamat master sa pag bahagi mo ng kaalaman, naka kuha ako ng idea kapag ganyan ang problema ng cpu..
pwde b jn sir ung lighter fulid ..
Bro, pano yung me image sya pag nk slpak yung dalwang rams pero isa lang detected?
nice lods yan din problema ng interl motherboard ko itry ko nga salamt sa tut mo lods
salamat idol ganyan mga problema ng msi motherboard ko 6piraso. subukan ko ngayon gawin ginawa mo salamat.
Thank you idolo, New idea nanaman keep it up😇🙏❤️
Thanks a lot.❤️❤️
maraming salamat sayo sir ..dahil sayo nagkaroon ako ng idea para ma fix ko yung mobo ko ... akala ko talaga sira na slot1 ng RAM ko .. hndi ko tinulugan yung pc ko ng hndi naaayos ,, 2:26 AM ko na sya napagana ulit hahaha ..you deserved more subscribers !! God bless sir! more blessings to come
Hello Po kuya Yung Cpu socket kulay brown na may I ask kung paano maging malinis Yung Cpu socket ko?
same problem sa z390 ko pero sinubukan kong gayahin lahat ginawa mo pero wala pa rin eh...ano kaya prob? kahit slot 1 and 3..ayaw eh... if 2 and 4 wala din...ang slot 4 lang talaga gumagana...
check for bent pin sa motherboard cpu socket
Help sir i tried using contact cleaner and even bought a new mobo pero yung isang ram slot talaga ayaw gumana
thank you boss. first time ko po kasi magpalit ng cpu cooler tas naging makalat yung thermal paste. nung tinry ko iopen biglang di gumana yung 1st ram slot kaya akala ko defective yung mobo ko. then tinanggal ko yung cooler tas nilinis konte yung area sa socket saka yung cpu mismo tas binalik ko yung stock cooler, gumana na ulit yung ram slot! salamat po ulet papa rma ko na po dapat mobo ko eh hahahahaha :)))))
Pede po ung Botny Contact cleaner?
ung iyo po kase hardex Contact cleaner
any brand naman po pwede, basta contact cleaner po
@@JojitManlapaz sana maayos akin 2 ram di nagana saken di ko magamit pc
Boss... Pano kung may bend pin nga talaga
Boss, pwede rin po ba to sa newer motherboard? Kasi yung X570 ko nagkaproblema sa RAM slot eh, pag dual channel di na nagdidisplay, pag isa lang sa isang working slot, okay naman. Pwede rin ba to sa ganyang method?
Check mo sir baka may putol pin ng processor mo. Di kasi kita minsan sa mata need ng lens, or zoom mo gamit ang camera ng cp
Salamat po sa Dios Thank you po sir God Bless Po
pwedi pa wd40 ilinis? nag reseat nako ng cpu ko pero di pa rin na dedetect yung isang slot. other slot is working both ram is working but sa isang slot walang display
Baka meron na deep sratch pcb ng board mo. Kapag ganyan mahirap na. Big no sa wd40!
@@JojitManlapaz not sure typical linis lang ako kanina then repaste pagbalik ko isang slot di binabasa
Bhai mere PC me ram ki problem hai.
Bhai ram lagata hu to 2 minute chalta hai fir koi ek perticular color aata hai or PC bhi band nahi hota
Please koi batao Kya problem hai.
1-2 minute chalta hai fir koi color aajata hai please help me 😭😭🙏🙏🙏
boss paano kung AMD board at same problem.
aligtas muku keng gastus kabalen, dakal a salamat
good day sir pwede po magtanong about sa problem ng pc ko, specs po ng pc ko ryzen 3 2200g, asus prime b350, 8gb ram hyper x, gtx1050 ti, 500watts 80+white psu. ang problem nya po ay nag aauto shutdown tpos kapag ioopen ulit ayaw n mag turn on pero nailaw yung board nya,, tpos sa ram slot nya 1 dimms slot ang gumagana ayaw sa ibang slot. kapag na open naman po sya minsan maghahang na po sya. sana po matulungan nyu po ako..
Pano naman sir pag na auto shutdown?
Gantong ganto problem ko after ko ideepclean ung pc.. di na gumagana ung isang ram slot
Yung akin pag linis ko ng cpu tinanggal ko.. yung ram isa di na nag work. Ano kaya dahilan
try nyo linisin yung ram pin using Pencil Eraser
Sir pano po ayusin to pc ko 2gb ram po sinalpak ko gumagana nabubuhay monitor and keyboard pero pag 4gb ram ayaw mabuhay monitor at keyboard na try ko na din po ibang 4gb ram pati sa kapatid ko na nagana talaga ayaw gumana sa pc ko
Nice boss...ganyan nangyari sa biostar motherboard ko...4 slot ram sya...2 slot nalang nagana...subukan ko to boss sa next na paglilinis ko ...salamat boss...
kumusta boss?
naayos ba?
@@rigidhammer7376 hindi boss...iba pala sira nung sa akin...nagkamali ako ng linis...bended na yung ibang pins...kaya di na gumana yung isang slot ng ram...kaya nagpalit nalang ako ng mobo...
@@ianvincentrosales785 awts
Lods pano po pag nag beep po sya pag nakalagay sa isang ram slot 1, pero pag nasa ram slot 2 sya, ok naman nag boot. Sana matulungan nyo po ako.
tagal kona nag bubuild ng pc ngayun ko palang nalaman to, It helps a lot sir thanks, naligaw lang ako sa video na to,