Installing an internal boot opening button (after I was told not to) | Citroen C5 Tourer

Поделиться
HTML-код
  • Опубликовано: 28 ноя 2024

Комментарии • 21

  • @asaflevy1540
    @asaflevy1540 3 дня назад +1

    14:02 The shock, awe and happiness on your face is that thing we all get every time we solve a problem on these cars ❤

  • @ST-ds3sp
    @ST-ds3sp 3 дня назад +1

    So smart idea 👍😊
    I had the same emotion as you when i fix smthg on my car and now i will try to plug this button also, thnaks again for your videos and your kindliness 🙏

  • @nigelnightmare4160
    @nigelnightmare4160 3 дня назад +1

    As a disabled driver the fact that you could ONLY open the tailgate remotely but had to go to the open boot and try to reach up to the switch to close the damn thing was/is my biggest bugbite!

  • @remispsa8590
    @remispsa8590 3 дня назад

    Hi. Glad you done it. For lighting this trunk button you only need one wire connect to left side buttons (parking assistant + check). I you need i can check which pin.

    • @comcarclub
      @comcarclub  3 дня назад

      Thanks for the info. I know which pin, but is it the ground wire?

    • @remispsa8590
      @remispsa8590 3 дня назад

      @comcarclub No. It's +12v interior lighting wire. From left side buttons (check + parking space measurement buttons) wire number 5 will be. Or front cigar lighter wire number 1 will be.

  • @EudesRJ
    @EudesRJ 3 дня назад +2

    The connector already have a ground, I believe based on guessing that you need only the illumination “power” to it work.

    • @comcarclub
      @comcarclub  3 дня назад

      Thanks for answering. Any idea which wire it is?

    • @EudesRJ
      @EudesRJ 3 дня назад

      @ I don’t know but you could tap the illumination signal (probably just 12V) on each remaining pin to see if the light go on.
      (Maybe a multimeter on continuity mode just to be sure that one of those pins isn’t another ground.)
      If plug on the wrong one (the other buttons) nothing happens because isn’t pressing it.
      Maybe using a 9v battery connecting to the buttons ground and just tapping it on the other pins to see who is the light on.

    • @nigelnightmare4160
      @nigelnightmare4160 3 дня назад +1

      @@comcarclub Disconnect the switch from the cars electric system.
      You already know which pin is earth then connect 12v power to the different pins in the switch till it lights up.
      Then splice a wire from the lighting circuit to that pin.
      HTH

    • @oaenusaochuenaocuao
      @oaenusaochuenaocuao 3 дня назад +1

      @@comcarclub I'd guess you just need to find a wire from another illuminated element. Use a Voltmeter to find a wire that has 12V only when lights are on. I've found suitable fuses to splice into for my Dashcam in this way.

    • @comcarclub
      @comcarclub  3 дня назад

      @@nigelnightmare4160 thanks!

  • @oaenusaochuenaocuao
    @oaenusaochuenaocuao 3 дня назад

    The fact that it also closes is truly amazing. I know what I've got to do... Thanks a lot.
    By the way, do you have heated seats and are they broken? I'm looking for a cheap fix. My mechanic friend tells me working on the seats is a real pita. Lumbar adjustment is also broken...

    • @comcarclub
      @comcarclub  3 дня назад

      No, no heated seats in my C5. I wouldn't mind getting them but that would mean new seats. Do you know if the rear seats can be heated or just the front ones? Thanks!

    • @remispsa8590
      @remispsa8590 3 дня назад

      @@comcarclub Only front seats for C5 X7.

    • @comcarclub
      @comcarclub  3 дня назад

      @@remispsa8590 thank you. And I hope you enjoyed this video

    • @remispsa8590
      @remispsa8590 3 дня назад

      @@comcarclub I enjoyed video as always. I've been watching videos on this channel for two years now.🙂

  • @Proton622
    @Proton622 2 дня назад +1

    citroen and peugoet share parts so it shouldn’t cause problems? anyway enjoy using your button! :)