They're not random numbers you have 3 ques and you have 12 shots per que. Your unit gos from 0 to 99 ques eash que has 12 shots for a total of 1200 shots tgat you can exspand it to
That price point beats out the bigger systems for sure. With back yard use, it should be just fine.🎆 🔋Might want to remember to take out the batteries when you're going to put it away. Corroded batteries suck! 🔋
And those numbers don't represent districts/zones or "areas" those numbers represent individual modules. Its up to the person handling the show to keep track of what individual or pair/pairs of modules are linked to a corresponding district.
@@pyromike3002 Yeah I know but when you first get it they are programmed that way and you can change them to whatever area you want you said you didn't know why they were numbered and now your an expert
Hello, love the video. Very informative. Quick question: can you plug in multiple igniters into the same slot on the receivers. So if your using regular wire igniters, can you plug in 2 igniters leads into cue 1 on the module. I know this isn’t practical for a show but would it work.
Yes you can and it is practical. Lots of people do it. But when doing so i wouldn't do more than 3. And if you're using the talon clips they need to be connected differently than when using standard ematch or blue firewire. Talon connects need to be wired in parallel, ematch needs to be wired in series if you're using more than one of either per cue. If you need info on how to wire in parallel and or series you can search it on RUclips.
Hi Mike, Is it possible to program 2 receiver boxes to cue 1 Area 1 so that when on area 1 when you press #1, cue 1 fires on 2 receivers? Also, have you found a manual for this anywhere? Or at least a youtube video that subs as a manual?
Yes, for ease of understanding i call them modules and cues, each module has 4 ques. With my show i had 3 stations, left center and right. My left and right stations were identical so i had 2 module 1's, 2's and 3's ect. Not sure what the limit is. But for me on district/area 1, i had 2#1 modules so when i hit cue 1 i actually figured 2 of the same firework on 2 different shooting stations. Hope that helps
@@pyromike3002 This is exactly what I am looking to do, I will have a station way left, and then one way right, both stations will have duplicate fireworks that need to go off at the same time but off the same cue, but off of different modules because the stations are so far apart
Yes. The system has 100 districts/channels. 12 cues or modules can be programmed on each district/channel. In order to fire only 1 module/4cues at once. You would have to have only 1 4 cue module assigned to a district/channel then simply hit the all fire button.
I take it you got the "random numbers" figured out.
They're not random numbers you have 3 ques and you have 12 shots per que. Your unit gos from 0 to 99 ques eash que has 12 shots for a total of 1200 shots tgat you can exspand it to
That price point beats out the bigger systems for sure. With back yard use, it should be just fine.🎆
🔋Might want to remember to take out the batteries when you're going to put it away. Corroded batteries suck! 🔋
Thanks for the info fellow pyro
They aren’t random numbers those are the areas each area has 12 ques then you can keep adding areas
Or called districts and if it wasnt random there would be 3 1s, 3 2s and 3 3s
And those numbers don't represent districts/zones or "areas" those numbers represent individual modules. Its up to the person handling the show to keep track of what individual or pair/pairs of modules are linked to a corresponding district.
@@pyromike3002 Yeah I know but when you first get it they are programmed that way and you can change them to whatever area you want you said you didn't know why they were numbered and now your an expert
@@raa6317What i said was they were random as in not in order
Hello, love the video. Very informative. Quick question: can you plug in multiple igniters into the same slot on the receivers. So if your using regular wire igniters, can you plug in 2 igniters leads into cue 1 on the module. I know this isn’t practical for a show but would it work.
Yes you can and it is practical. Lots of people do it. But when doing so i wouldn't do more than 3. And if you're using the talon clips they need to be connected differently than when using standard ematch or blue firewire. Talon connects need to be wired in parallel, ematch needs to be wired in series if you're using more than one of either per cue. If you need info on how to wire in parallel and or series you can search it on RUclips.
Hi Mike, Is it possible to program 2 receiver boxes to cue 1 Area 1 so that when on area 1 when you press #1, cue 1 fires on 2 receivers? Also, have you found a manual for this anywhere? Or at least a youtube video that subs as a manual?
Yes, for ease of understanding i call them modules and cues, each module has 4 ques. With my show i had 3 stations, left center and right. My left and right stations were identical so i had 2 module 1's, 2's and 3's ect. Not sure what the limit is. But for me on district/area 1, i had 2#1 modules so when i hit cue 1 i actually figured 2 of the same firework on 2 different shooting stations. Hope that helps
And yes there is a video on how to program the system
If you'd like i can make a video how to program or just tell you
@@pyromike3002 This is exactly what I am looking to do, I will have a station way left, and then one way right, both stations will have duplicate fireworks that need to go off at the same time but off the same cue, but off of different modules because the stations are so far apart
Can u link me to the video? I cant find a manual online for this thing and that's pretty disconcerting...I will get the unti in a couple of days
Can I program this system to puss 1 button and all of 4 cues fired at the same time on module 2??? Thanks
Yes. The system has 100 districts/channels. 12 cues or modules can be programmed on each district/channel.
In order to fire only 1 module/4cues at once. You would have to have only 1 4 cue module assigned to a district/channel then simply hit the all fire button.
Can I firing this 1200 bilusocn with DB04r channels??? Thanks so much
@@cropyrotechnics5368 i do not know. I have other modules that look the same but are not compatible
How can you program it so if u press 1 both 1s fire on two or more modules?
Take toothpick, press toothpick in hole and hold until module blinks, then press number 1 on system
PyroMike300 could u make a seperate video on that?
@@exxeyes Yeah i will today after work
PyroMike300 thank you very much! I subscribed!
PyroMike300 hey so when is the video gonna come out?
👍👍👍 I subbed.
Thanks bud ill have more videos soon