You have done a great job explaining this display sir. I searched KD 21c and found this the best explanation on RUclips. Kudos to you my friend and thank you.
Bike is set to top speed , is there a way to override this through settings or do you need an extra bit of kit? 15mph limit needs adjusting. Explanation of the menus spot on.
Robert in the controller ( not the display control)there is a shunt you can add a bit of solder to it will give a bit more power .or just change it for a better controller.
I tried out your key combinations on the newer Eskute Pollino controller to no avail. Tried pretty much every key combination I could think of to access any menu but nothing. I'd love to set it up for a bit of off-roading. Thankyou for the video.
Hello, the Eskute Polluno has another display than its predecessor Voyager/ Wayfarer, for support please reach out to your Eskute dealer's website, thank you
0:39 If I'm not mistaken this is only the KD21C display. The controller should be more like a box. It is probably embedded in the battery frame? Robert, could you please talk a bit about a sensor-based controller and sensorless controller? What is the difference and what wastes most Power? Thank you for the video.
My new EBike uses a different display called a 410S, and one of the options is "OF" and it ranges from 0-10. I haven't reached out to the vendor yet but any idea what this could mean?
Please excuse me! I have a question: Is the output of your Display 5 or 6 PIN? The fact is that my display is stripped down from the factory and I have the opportunity to set only the first three values: UO l SC a CU r
Ive brought a brand new battery for my bike fully charged it up but the display says its only on 1 bar it wont go to four bars any ideas its a macwheel 28
@@chrisdixon1191 yes At the top of the battery housing behind where the key is for the batt is the control unit. Lift it out and there is one white wire with a connection in the middle. Just unconnected this and it removes the limiter
My throttle setting is on, and the throttle will work when in the menus, but not when on the main screen; do you know why this might be and how to fix it?
@@ThinkingandTinkering it should be a standard setting for every ebike. Giving them a slightly more proper reason to be. I wrote some thoughts about this in a comment to the unboxing video of this bike. Thank you once again for your channel. (PS electricity for using my phone for this message comes from muscle power)
I think I'm right in saying you can't have regen on a geared motor which I think this particular bike is. Only the gearless motors will be able the charge the battery up when braking.
@@recumbentrocks2929 I'm not thinking about regen when breaking. I'm thinking that electric bikes should generally be able to be turned into (stationary?) generators.
At 7:50 he talks about the max speed setting. It comes with a Max speed of 40 kph, aka 24.8 mph. Besides that, you could try tricking the controller by telling it you have a smaller wheel size.
@@McRootbeer thx for that but he is only showing the default setting which can only be lowered... What I think is the speed controller needs to be tricked into thinking it's not going 15.5mph and therefore will continue to give electric help
Sell yourself to the money god and end up into the limbs. And all your knowledge with you. You do it for money, not for sharing anything to us. So i'll take my account down to stop financing your stuffs.
You think everyone on youtube should be doing it for love or what? Think of how much he must spend on some of the projects he has done let alone the time involved.
You have done a great job explaining this display sir. I searched KD 21c and found this the best explanation on RUclips. Kudos to you my friend and thank you.
Best explanation l have heard … logical and calming…GREAT JOB!
Hello thank you for the video. Is there a way to clear everything back to original settings?
I’m trying to figure that out to
Push (+) (pwr) at the same time set dEF to Y
The speed limit default is already set at 40........... but the motor stops at 25kmh...is there a way of delimit this for off road?
Great video with lots of great advice & tips.
Would you kindly let me know how to RESET TO FACTORY SETTINGS please.
Many thanks 🙂
Thank you for making this video, so I can understand how my menu works. I appreciate it sir.
Can you reset the miles ?
Bike is set to top speed , is there a way to override this through settings or do you need an extra bit of kit? 15mph limit needs adjusting. Explanation of the menus spot on.
Great video, any idea where I can source a new controller unit for the display? My Dad's has died and we can't seem to find a replacement
Robert in the controller ( not the display control)there is a shunt you can add a bit of solder to it will give a bit more power .or just change it for a better controller.
Hi mate did you find out any more info about the shunt anywhere else other than youtube? Or did you find an alternate controller?
I tried out your key combinations on the newer Eskute Pollino controller to no avail. Tried pretty much every key combination I could think of to access any menu but nothing. I'd love to set it up for a bit of off-roading. Thankyou for the video.
Hello, the Eskute Polluno has another display than its predecessor Voyager/ Wayfarer, for support please reach out to your Eskute dealer's website, thank you
0:39 If I'm not mistaken this is only the KD21C display. The controller should be more like a box. It is probably embedded in the battery frame?
Robert, could you please talk a bit about a sensor-based controller and sensorless controller? What is the difference and what wastes most Power?
Thank you for the video.
Perhaps controls (rather than controller) would have been a better choice of words?
@@kingfishercomputing9497 Well I don't know for sure but I suspect it is only the display unit with configuration ability.
mine will not do 40kph? how come is this
hello great video, by setting on sc you can set the speed and unlock it from 25kmh to 40kmh? thank you
My new EBike uses a different display called a 410S, and one of the options is "OF" and it ranges from 0-10. I haven't reached out to the vendor yet but any idea what this could mean?
Great clear and useful information .Many Thanks
Very helpful as I have a second hand macwheel, which is the same bike just different name.
That's not the controller that's the instrument display monitor.
Thanks for your efforts and sharing 👍🇬🇧
cheers mate
Do you have a more comprehensive video showing how to do the other settings that you mentioned? And which are which?
Please excuse me! I have a question: Is the output of your Display 5 or 6 PIN? The fact is that my display is stripped down from the factory and I have the opportunity to set only the first three values: UO l SC a CU r
Hi Robert, please is there a way to change everything back to the original settings?
To make it go faster just change wheel size to a smaller setting.
@@kenadams4359 extremely late, but thank you, now it’s extremely fast the bike
Ive brought a brand new battery for my bike fully charged it up but the display says its only on 1 bar it wont go to four bars any ideas its a macwheel 28
When you switch it then press and hold the + button does it turn the headlight on or just the backlight display
How do you turn the headlight on
Can you do this on the netuno plus
Some good info I must say, what’s your thoughts on this being a first e-bike as I’m thinking of getting one?? Cheers 👍
I have this bike and im haveing problems with the display screen cutting off does anyone know what this could be
Hi Sir! Do you know how to erase the total mileage shown in the odometer? It seems that you can only erase the mileage of a single trip.
Have you tested it? Does the rear wheel actually spin up to 40 km/h when lifted on a full throttle?
No 25
@@markohrncic8338 25 MPH not kmh
It’s 25km
Hiya! I've got problem with key screen.. It won't start.. What can I do than please
What setting should sp 5 be at mine is at 1
Great job as per usual.
Cheers mate
Thank you! Cheers!
i have bike mac wheel wrangler 6 thanks for instruction i have question one you can buy for you bikr second baterry?
Do you know the model number for the display that comes with the new netuno
Change the speed settings does not change the max speed, I've tried but still maxes out at 15.5 mph or am I missing something
Same issue, did you find a way to resolve this?
@@chrisdixon1191 yes
At the top of the battery housing behind where the key is for the batt is the control unit.
Lift it out and there is one white wire with a connection in the middle. Just unconnected this and it removes the limiter
My speedometer doesnt go off zero any ideas!
My throttle setting is on, and the throttle will work when in the menus, but not when on the main screen; do you know why this might be and how to fix it?
Did u fix it?
Thank you. Is it a lot of work to change it to pedal powered charging of it's own battery?
interesting question - I will have to look into that
@@ThinkingandTinkering it should be a standard setting for every ebike. Giving them a slightly more proper reason to be. I wrote some thoughts about this in a comment to the unboxing video of this bike. Thank you once again for your channel. (PS electricity for using my phone for this message comes from muscle power)
I think I'm right in saying you can't have regen on a geared motor which I think this particular bike is. Only the gearless motors will be able the charge the battery up when braking.
@@recumbentrocks2929 I'm not thinking about regen when breaking. I'm thinking that electric bikes should generally be able to be turned into (stationary?) generators.
Want to see Luke strapped on doing 40km - Yipeeee
lol
Hi .. bit of a tease there ..was hoping u was gonna show how to get the motor to work passed 15.5mph ... Can u do that please on the eskute 👍👍
At 7:50 he talks about the max speed setting. It comes with a Max speed of 40 kph, aka 24.8 mph. Besides that, you could try tricking the controller by telling it you have a smaller wheel size.
I showed how to get it up to 40kmph - that's 25mph - but I get what you mean
@@McRootbeer thx for that but he is only showing the default setting which can only be lowered... What I think is the speed controller needs to be tricked into thinking it's not going 15.5mph and therefore will continue to give electric help
Isn't this the ESKUTE wayfarer ... Cheaper and more powerful for the American market
@@soft16stick70 Hi, 40 is not the default setting, its the max. 27.5 is the default or 15.5mph. i knocked mine up to 40 no problem.
error 30 on that exact same bike?
Does anybody know how to enter the settings for the Netuno
What is error 11
My speedometer worked for 16 kilos
Interesting 😀👍
Glad you think so!
Is this just another ad???. All these controllers are much to complex esp when trying to ride.
what an odd way of putting it
You don't do this when you are riding you set it up before you ride lol.
Off road use. Yay!
Terrible bike starts off all good. Battery is terrible and the horn stops working. I have had three replacements of the battery.
Hettinger Village
👍🙏🙏🙏👍
cheers mate
Col bike
for sure mate - cheers
Sell yourself to the money god and end up into the limbs. And all your knowledge with you. You do it for money, not for sharing anything to us. So i'll take my account down to stop financing your stuffs.
You think everyone on youtube should be doing it for love or what? Think of how much he must spend on some of the projects he has done let alone the time involved.