Bro what🤣 its like since 2021 all we see is s1krr and m1krr. Simple youtube search gives you at least 10 different guys running about the same set up and same trap speeds. We need something different.
There isn’t much you can do to those bikes. The videos that are already up, are basically all you can do to them. They’re complicated bikes because of their tech. I’d rather see more GSXR, Busa and ZX10 videos. They’re faster, more supported and easier bikes to work on.
Can’t wait to see the full carbon tail on this bike! The tank I did set the bike off and I hope mani’s painter in Miami does a good job on the tail, this bike deserves the best!
I want to go back and watch the comparison videos between the V4R and new M1000RR. For me it's all about where the bike makes their power. The V4R actually makes less power than the V4S in the low to mid rev range...the V4R just signs off so much farther out and continues to build. For long straights that could be great for the average rider. But having more mid range power between that 7k -13k mark is money. It's just about how you plan on using the bikes. I will say you could stay in the meat of that higher power of the V4R on the track by gearing down...but I'd cry for weeks if I dumped my V4R on the track.
Okey quick question stock v4r vs stock m1000rr fresh out of the factory which one will be faster ? I know v4r doesn't make any were close 240hp which Ducati claims atleast on whp & m1000rr has less whp loss compared to v4r so which one will be faster & have higher topend with rider having the same weight
Now I have to find the old videos of the m1000 vs v4r. Was it that big of a difference cause I thought the m1000 had a better top end or was that the Ape??
I don’t think people are putting the effort on it like 5 to 10 years ago. Back then you would build a bike to ride for a few years. Now a days these youtubers are just building bikes to use for a year or two. The aftermarket support has been in the decline. Headers, air filter, ecu flash, swing arm and chain and sproket conversion and thats it.
shouldn't your bike be on a dyno for another ecu tune after installing new velocity stacks and new sprint airfilter? you got to fine tune your bike after adding more airflow. even brenn tuning knows that
I'd do anything to have one of your bikes. I have a 2010 CBR 600RR with almost 30,000 miles on it. I'll trade you my bike and car 2018 Chevy Malibu for one of your bikes even an older one of your. Both vehicles are paid off. This will prolly make you laugh but I am serious hope to hear from you.
Nice to know a confident mechanic
M1000rr and BMW s1000rr!! Need more vids of those bikes
ruclips.net/video/aQvUGqTswzA/видео.htmlsi=fiJpJyq13Uji9fIj
Bro what🤣 its like since 2021 all we see is s1krr and m1krr. Simple youtube search gives you at least 10 different guys running about the same set up and same trap speeds. We need something different.
There isn’t much you can do to those bikes. The videos that are already up, are basically all you can do to them. They’re complicated bikes because of their tech. I’d rather see more GSXR, Busa and ZX10 videos. They’re faster, more supported and easier bikes to work on.
Love Zacks independent truck jumper. Takes me back to my skateboarding days.
this man is a strange dude but I can't help to watch this shit lol hahahah
Panigaleeeeeee 😬
I cant wait to see the race with art is fast and teach him a leasson 🔥🔥
That sounds absolutely amazing!
so you are looking for any weight saving but you didn't get ride off the useless cable which not necessary to reconnect to air box?
I see you have some new beef with art. Take that joker out ib!
We will race soon 🦾🦾🦾
Have you thought about getting the Brentuning flex fuel tune for the BMW M1000? Pretty sure that would close the gap if not pass the V4R.
Like to see the MXR too here pretty soon!
Can’t wait to see the full carbon tail on this bike! The tank I did set the bike off and I hope mani’s painter in Miami does a good job on the tail, this bike deserves the best!
M1000 RR making more power 😍🔥🙏🏻
WHAT A SOUND ❤💪💪💪
Are you planning on racing the white gtr? I’m super pumped
Yes I am!
The lawn mower at the end threw me off 😂
I want to go back and watch the comparison videos between the V4R and new M1000RR. For me it's all about where the bike makes their power. The V4R actually makes less power than the V4S in the low to mid rev range...the V4R just signs off so much farther out and continues to build. For long straights that could be great for the average rider. But having more mid range power between that 7k -13k mark is money. It's just about how you plan on using the bikes. I will say you could stay in the meat of that higher power of the V4R on the track by gearing down...but I'd cry for weeks if I dumped my V4R on the track.
Will always like a video with Zack.
grass cutting machine enhancement!!!!
I want to know more about that lawnmower 🌈🦄🏁
Okey quick question stock v4r vs stock m1000rr fresh out of the factory which one will be faster ? I know v4r doesn't make any were close 240hp which Ducati claims atleast on whp & m1000rr has less whp loss compared to v4r so which one will be faster & have higher topend with rider having the same weight
Do you still do the new bike builds?
Yes, we are working on a 2023 Aprilia RSV4 Factory Speed White now
@@650ib joined
BMW M1000RR km200🎉🎉🎉
after several tests on the bench I validated the Alpha racing speed batteries which are cheaper and perform better than those from Brentuning
Share more information please
Now I have to find the old videos of the m1000 vs v4r. Was it that big of a difference cause I thought the m1000 had a better top end or was that the Ape??
Just ordered my helmet 😈😈
I wish Zach the master mechanic could look at my 2023 s1000r.. I swear he could find my slow oil leak
Ship the bike to him at Sills Motor Sales in Cleveland Ohio 216.749.1363
Is the lawnmower getting a flash too? 😆
Yes, Yes, Yes👍👍👍
Anyone in the USA got the rrr blade to 215hp + ?
I don’t think people are putting the effort on it like 5 to 10 years ago. Back then you would build a bike to ride for a few years. Now a days these youtubers are just building bikes to use for a year or two. The aftermarket support has been in the decline. Headers, air filter, ecu flash, swing arm and chain and sproket conversion and thats it.
Oooooo,sounding sweet afterwards!!! ; >)
Just needs ohlins forks now
shouldn't your bike be on a dyno for another ecu tune after installing new velocity stacks and new sprint airfilter? you got to fine tune your bike after adding more airflow. even brenn tuning knows that
Let’s gooo
I'd do anything to have one of your bikes. I have a 2010 CBR 600RR with almost 30,000 miles on it. I'll trade you my bike and car 2018 Chevy Malibu for one of your bikes even an older one of your. Both vehicles are paid off. This will prolly make you laugh but I am serious hope to hear from you.
#650ib♥️
beutiful m1k
more power less rrrr's🙏
So now it's fast, you going to learn to ride it??
😉💙👌