Great video finally someone explains the basics of how to make a compass. I have just one question would a stainless steel work in the place of the aluminium, I think stainless steel does not affect the magnetic field of the magnet. And I also wanted to know if the case could be made out of stainless steel. I'm asking this because I want to use the concept to make one that looks vintage.
Thank you for visiting. Please note that some stainless steel components may affect the magnetic field. I think the case can be made of stainless steel, which does not affect the magnetic field
In addition to aluminum, copper, brass and plastic can be used. Anything that disturbs the Earth's magnetism, such as iron or stainless steel, cannot be used. Thank you for watching.
I really like your compass design. We are making 80 of these and I don’t want to have to cut out that many circles from aluminum cans. Could a flexible plastic be used instead?
How is it do u make it so it’s the accurate in terms of North South etc.. This is for a school project so I need to explain how it’s accurate and how it’s magnetic
compass ins interesting but can you put in detail where did u get the parts from (aluminium can) is it from a bottle ? also put the links for the part to buy online if possible?. pretty new to science project and not sure where to buy these parts
Aluminum is a can of juice or beer. Other parts were also purchased at the DIY store. I didn't buy it online. Neodymium magnets and iron screws don't really care about their dimensions. All you have to do is fit it in a plastic case.
Very nice video for making magnetic compass....Please share measurement details of plastic container, nail, small screws and round & long sheets used for making it.
Thank you for visiting. The inner diameter of the plastic is 38mm and the height is 25mm. A neodymium magnet has a diameter of 6 mm and a thickness of 2.5 mm. The countersunk screw has a diameter of 2 mm and a length of 15 mm. The nail is 1mm in diameter and 17mm in length. The aluminum plate has a diameter of 37 mm. The long side of the rectangular paper is 111mm and the widths are 5mm and 10mm.
Thank you for visiting. The inner diameter of the plastic is 38mm and the height is 25mm. A neodymium magnet has a diameter of 6 mm and a thickness of 3 mm. The countersunk screw has a diameter of 2 mm and a length of 15 mm. The nail is 1mm in diameter and 17mm in length.
That's so simple, smart and exactly what I was looking for. Thank you very much!
Thank you for your comment.
@@yattemita4447 brother did you attached the nail attached to magnet uptill the bottom
You have the best example on you tube. Nice and neat.
Thank you for your comment.
That help me soo much thanks alot and I'm thinking of making my own compass 😁
Thank you for your comment.
That's really awesome and easy.. thanks a bunch..!
Guess it's a new project for the children this coming holidays.. hehehe.
どうもありがとうございました
Thank you for your comment.
It's so easy and useful. Thank you for sharing.
Thank you for your comment.
すごい!
コメントありがとうございます
@@yattemita4447どう致しまして
Great video finally someone explains the basics of how to make a compass.
I have just one question would a stainless steel work in the place of the aluminium, I think stainless steel does not affect the magnetic field of the magnet.
And I also wanted to know if the case could be made out of stainless steel.
I'm asking this because I want to use the concept to make one that looks vintage.
Thank you for visiting.
Please note that some stainless steel components may affect the magnetic field. I think the case can be made of stainless steel, which does not affect the magnetic field
@@yattemita4447 Woaw thank you for answering that quickly. Do you have any other kind of metal to recomend me to replace the cardboard pieces?
I think any material that does not affect the magnetic field can be used in place of cardboard. For example, aluminum, brass, copper, etc.
Beautiful job
Thank you for your comment.
@@yattemita4447 are you from United States of America 🌷
No I am japanese.
@@yattemita4447 i love the Japanese because they're smart minded greetings to you 🥀🥀🥀
great and thanks i will try it.
Thank you for your comment.
Please try it.
ok
i am going to try today
@@yattemita4447 are you Japanese I like Japanese.
could please give the in structions on how to make a magnetic compass looks really cool
Please see the video for how to make it.
Is there anything we can use instead of aluminum can ,if yes then please reply as it is my school project . ??
I think a plastic plate is fine.
Say you wanted to make a working compass inside a metal stopwatch. Would it still work or does it need to be plastic?
I think to work as long as such as copper or aluminum, which does not disturb the magnetic field.
@@yattemita4447 okay thank you! I think it's iron tho? I'll look into it. Thanks for answering!
What if the compas magnet is so strong that the compass goes flying to antartica or the North pole
Thank you for your comment.
😂😂😂
Are you gone mad
Very nice
And cool
Thank you for your comment.
This is what was looking for.
Found some magnetic rocks while magnet fishing, do you think those will work?
Thank you for your comment.
I think it will not work with magnetic rocks.
Wow! This is neat, and also amazing!
Thank you for your comment.
Gand
Very nice
Thank you for your comment.
Hi.. your video is nice👌. I have a doubt.. do we have to use only aluminum as base?
In addition to aluminum, copper, brass and plastic can be used.
Anything that disturbs the Earth's magnetism, such as iron or stainless steel, cannot be used.
Thank you for watching.
Thanks for sharing.... it's awesome. Can I use hard paper board instead of aluminum?
I don't know because I haven't done it.
No it's not working... Just now trying. Let's try using plastic board.
I really like your compass design. We are making 80 of these and I don’t want to have to cut out that many circles from aluminum cans. Could a flexible plastic be used instead?
If the axis of the compass can be supported, I think plastic is also acceptable. Please try it.
yattemita325 I ordered very thin acrylic discs...I’m going to try it and see if it works and let you know. We will drill tiny holes in the top disc.
I too
Never seen a compass needle react that way before. He's got a magnet under the table.
Thank you for your comment.
That's right. Magnets are in the earth. Far under the desk.
@@yattemita4447 🤣 I'll just leave this conversation there
@@martinbachrodt745 hes not wrong, all that stuff moving inside earths core acts as a magnet
@@yattemita4447
..Excellent reply ! 😄👌🏼🤘🏼💚
What is the cost of that neodymium magnet you used?
And how can I get it?
Thank you for visiting.
I bought it at a nearby 100 yen shop.
It is 100 yen for 8 pieces.
If you don't have a store near you, look for it online.
You can get this magnets from speaker of any earphone 😂
@@yattemita44472:46
How is it do u make it so it’s the accurate in terms of North South etc..
This is for a school project so I need to explain how it’s accurate and how it’s magnetic
This video shows how a compass is made using neodymium magnets, not a school project.
i was doing it for a school
project
Would a ferrite magnet work too? Or would it be not strong enough?
Ferrite magnets may not work because they are not as strong as neodymium magnets. If you have a ferrite magnet, please try it.
Thanks, I really inspired
Thank you for your comment.
other than neodymium magnet, can we use other small magnet ?
I can't say anything because I don't know the size.
How do you balance the tip of the nail
Use iron screws of the same weight.
compass ins interesting but can you put in detail where did u get the parts from (aluminium can) is it from a bottle ? also put the links for the part to buy online if possible?. pretty new to science project and not sure where to buy these parts
Needs more specific details like whats the neodymium magnet dimension 6X2mm or 6X3mm iron screw and nails exact name and dimension if possible.
Aluminum is a can of juice or beer.
Other parts were also purchased at the DIY store. I didn't buy it online.
Neodymium magnets and iron screws don't really care about their dimensions.
All you have to do is fit it in a plastic case.
We have make hole in both the alluminium circles? Or only in the top one?
Looks like both have holes but because the needle had to poke through them, i think only the one on top is the one that actually needs it
Both aluminum circles are perforated.
Very nice video for making magnetic compass....Please share measurement details of plastic container, nail, small screws and round & long sheets used for making it.
Thank you for visiting.
The inner diameter of the plastic is 38mm and the height is 25mm.
A neodymium magnet has a diameter of 6 mm and a thickness of 2.5 mm.
The countersunk screw has a diameter of 2 mm and a length of 15 mm.
The nail is 1mm in diameter and 17mm in length.
The aluminum plate has a diameter of 37 mm.
The long side of the rectangular paper is 111mm and the widths are 5mm and 10mm.
Thanks
Nice video
Thank you for your comment.
Nice😮
Thank you for your comment.
I am gonna make this in my science project😊😊😊
Thank you for your comment.
Awesome
Thank you for your comment.
Nice.
Thank you for your comment.
Op the best compass, best for sci projects and also low budget 😃😊
Keep it up
Thank you for your comment.
Very good
Thank you for your comment.
I do not have alumunium bottle so what can i use instead of that
I think a thin plastic plate is fine.
@@yattemita4447 ok
Plz do a review and use your to find things plz make vedio on it
Can you use a regular magnet instead of a neodymium magnet?
I'm not using.
It's not hard to find a neodymium magnet it's also in handsfree/headphones
Cool! It didn’t work for me tho.. what type of screws and nails did you use
The magnetic pull didn’t work
Screws and nails are made of iron.
Can I use soda can material instead of aluminiam
Can be used if it is not made of iron
if we have no aluminium can, we can use aluminium foil or not ?
I think the aluminium foil is not strong enough to support the magnet.
Is there anything else you can use instead of the iron nails?
If it's not iron, it's impossible because it won't stick to a magnet.
Where can we find the plastic case? Can you give link if it is available online?
I bought it at a 100 yen shop near my house.
@@yattemita4447 oh, but I'm unable to find it.
Unfortunately I do not have any further information.
I don't have round shape neodiyum magnet can I use square shape
I think you can do it with square shape.
Who did you set the magnet in the iron nial
Thank you for watching.
Nice
Thank you for your comment.
Nice 👍
Thank you for your comment.
Is there any replacement for the plastic case ?
I can't think of a replacement.
Great
Thank you for your comment.
Excelent
Thank you for your comment.
Can I use cardboard instead of aluminum
I haven't used it, but I think it's possible
Is there any another idea to make compass please share the link here
I also made a compass that floats a magnet in water.
Please see that as well.
ruclips.net/video/H_GnSLuuVHY/видео.html
I don't want to make water compass
Please share the link compass but it should be not water compass
How yo have balanced centre pin?
It uses two aluminum discs.
Then, use a screw of the same weight.
T
he nail passes through both the holes?
Both are drilled.
Can we use paperboard instead of aluminium can?
I don't think it's impossible.
@@yattemita4447 ok thx
Good bro
Thank you for your comment.
Which type of plastic we can use instead of aluminium can
I think a plastic plate is fine
Hey buddy done well
Thank you for your comment.
how can i get a plastic case just like yours
I bought it at a 100 yen shop.
could you give me the instructions I would like to try this please
Which instructions?
Do galvanized nails work too?
I think it work too.
Can we use a plastic glass
I don't use it so I don't know
Can we use simple paper
I don't know because it's not made from paper.
Can we use aluminium foil please tell
I think the aluminium foil is not strong enough to support the magnet.
What is the name of that steel cutting machine.
The tool that cuts aluminum plates into circles is called a ``circle cutter,'' which is a compass with a blade attached.
Where I get magnet from
If you can't find it in a store near you, I think you can get it online.
Can i use cardboard instead of aluminium?pls tell me ASAP
I don't know because I didn't do it with cardboard.
I think a plastic sheet would work
@@yattemita4447 will a paper sheet will work?
I think paper sheet will don't as well as plastic.
@@yattemita4447 I used plastic sheet but it didn't worked it remained still pls help
Is it necessery to use 2 aluminium can
You don't need two aluminum cans, one is enough.
Can we use cardboard instead of aluminium can
Why do some people say “north north” east/west or “south south” east/west why do they say it twice?
I don't know why
I believe its because some compasses have more than just the regular N S W E and NW NE SW SE written down
Is there anything else we can use instead of aluminium can?
I think brass would be fine too.
@@yattemita4447 thanks
Can we use foil paper
I think that foil paper is not strong enough.
I tried to make my own compass seeing your video but I used paper board instead of aluminum foil.. It didn't worked. why?? ☹️🤔
Can the magnet rotate freely?
@@yattemita4447 no
Try adjusting it to rotate freely
@@yattemita4447 okay. Thank you
Asomwme super godo exsclent
Thank you for visiting.
What is the use of the two tin plates
This is to hold the nail in the center.
@@yattemita4447 Oh now I understood,thanks
Good
Thank you for your comment.
Heello
I have a doubt what about east and west can u pls give me a solution 😊
What questions do you have about east and west?
nice video but what are the measurements of the things?
Thank you for visiting.
The inner diameter of the plastic is 38mm and the height is 25mm.
A neodymium magnet has a diameter of 6 mm and a thickness of 3 mm.
The countersunk screw has a diameter of 2 mm and a length of 15 mm.
The nail is 1mm in diameter and 17mm in length.
@@yattemita4447 thank you so much! this was really helpful
Thnk you so much
Thank you for your comment.
Arigatō
I am from India want to learn Japanese
Thank you for your comment.
Komento arigatougozaimasu.
If we have no aluminium can so what we use.
What can you prepare.
WOW!!!!!
Thank you for your comment.
Can we use other magnets
I don't know because it is not made with other magnets.
I think neodymium magnets are the best.
Thanks it works
Thank you for your comment.
exlnt.............
Thank you for your comment.
Name of the container???
Thank you for visiting.
A container with a lid.
@@yattemita4447
..What type of container it is...Where did you get this one from?
I made this but this is not working please reply me
Does it work just by attaching two iron screws to a neodymium magnet?
Is plastic case necessary?
Yes.
Thank you for watching.
Amazing
Thank you for your comment.
Nice work! low budget compass! Awesome (Y)
Thank you for your comment.
Super
Thank you for your comment.
Is this really working one
Thank you for your comment
It's working fine
can i use round magnet instead of neodymium magnet?
Thank you for your comment.
Please tell me the dimensions of the round magnet.
@@yattemita4447 is it important to have those cut circles aluminium?
It can be cut into clean circles.
Op love it I always try that 💋💋💋💋😭😭😭💗💗💗💗💗💗
Thank you for your comment.
In which country you live
I live in japan
Very tuf
Thank you for your comment.
Please make a easy water compass
Thank you for your comment.
I don't make a water compass because it's not practical.
Which country did you belong
Is Japan.
I uploaded a video of a easy water compass.
ruclips.net/video/H_GnSLuuVHY/видео.html
I am from India
What we can use instead of aluminium can please tell
Please tell fast 👆
I think a plastic plate is fine
Can we use paper glass or plate
??
I don't know until I try.
can i use aluminum foil???
I don't think aluminum foil can be used.