The labyrinth isn't to control the flow. The opening size does that. Instead, it's to create turbulence so it doesn't plug. Nice hand waving though as you say that, quite convincing.
If my drip is above my sprinkler anti siphon rain bird valve . How can I prevent the water back flowing back down to the anti siphon valve ? I have rain bird pressure compensating drip emitters with check valves built in . I also installed a 3/4” pvc check valve inline right after anti siphon valve . Still the water back flows after the timed station is complete not at once but gradually throughout the day . I made sure it’s not from diaphragm side. The water is causing erosion and doesn’t drain away fast enough. Rain bird said to install a pressure reducing inline filter... i control pressure with the knob on the valve so I don’t see how that would prevent back flow...
How do you clean the Clog Free ones? all eight in our wall clogged and the company was good getting us new ones. Within a week, the new ones started clogging.
Is there any type of drip emitters that serves with a really tiny deipping rate like 0.005 us gallons per day ? Is it possible for me to set such a system in my room ?
Not that I've found. At that point you're probably best making a little hole in a soda bottle or some kind of system that slows the water down, like a series of overflow brims.
Does anyone test drip emitters? I read so many posts about them not working. I need to install about 300 of them over 300 feet, and I really need to know they will work. I need the one at 1 foot and the one at 300 foot drip the same amount of water.
The labyrinth isn't to control the flow. The opening size does that. Instead, it's to create turbulence so it doesn't plug. Nice hand waving though as you say that, quite convincing.
What is the best drip button that doesn't struck in mud by not stopping water..please suggest
If my drip is above my sprinkler anti siphon rain bird valve . How can I prevent the water back flowing back down to the anti siphon valve ? I have rain bird pressure compensating drip emitters with check valves built in . I also installed a 3/4” pvc check valve inline right after anti siphon valve . Still the water back flows after the timed station is complete not at once but gradually throughout the day . I made sure it’s not from diaphragm side. The water is causing erosion and doesn’t drain away fast enough.
Rain bird said to install a pressure reducing inline filter... i control pressure with the knob on the valve so I don’t see how that would prevent back flow...
Thank you for this series! Where do you guys get your hardware from?
www.dripdepot.com/item/bowsmith-non-clog-dripper-dripper-model-sb-20-flow-rate-2-0-gph
Dan Gurney thank you!
very informative, thanks a lot!
How do you clean the Clog Free ones? all eight in our wall clogged and the company was good getting us new ones. Within a week, the new ones started clogging.
then you must study thoroughly your water sources then come up with right filter
Is there any type of drip emitters that serves with a really tiny deipping rate like 0.005 us gallons per day ?
Is it possible for me to set such a system in my room ?
Not that I've found. At that point you're probably best making a little hole in a soda bottle or some kind of system that slows the water down, like a series of overflow brims.
how is the water cycle for zipgrow towers with these emitters ? ( for example : 2h off - 4 hours on )
Can put dripping on pvc pipes
Does anyone test drip emitters? I read so many posts about them not working. I need to install about 300 of them over 300 feet, and I really need to know they will work. I need the one at 1 foot and the one at 300 foot drip the same amount of water.
Damn...That F**king commercial on "STOP WATCHING AQUAPONIC VIDEO'S"
We tried the clog free ones. Failure after failure with them.
how so?
That’s surprising, I have sold millions without issue. I am guessing you are not pre filtering?
@@bakobasque We have very hard water here. Constantly cleaning.
So sad that you guys are no longer around.
How so? They're not making content anymore or did the company close?
The founder sold the company and joined another agro start up.
@@impactodelsurenterprise2440 If he sold it, then someone must be running bright agro still. Or did they go under a different name?
Zipgrow.
zipgrow.com/blog-the-blog-is-back/
what happen if clogs 😭
Hi, thanks for your question. You can always remove the emitter and clean it up under running water to remove any clog.