I always use t1 only so just one back of module temperature probe. Basically I’m comparing two tests that happen with in ten minutes or something like that of each other so it’s the delta between dirty and clean modules. I want to compare more than to make a super accurate quantitative value. So if the temps and irradiance are constant and similar that’s what I need.
Paul, another great detailed video. How have the CAB cable systems worked out for you? We have similar concerns with ours being installed now, low to the ground and the vegetation concerns
Well so far we have had them weed whack and spray a 4 or 6 foot wide path underneath those CAB trays. I found a bird nest in one but they are only about a year old now.
Yes I realized that after posting that and made a follow up video with results and explanations. Here is the link and I will make sure I put that in the discriptioin of the set up video. ruclips.net/video/6yXZvfoGsdc/видео.html
I realized people want to see the test results so I added a link in the description with the test results. Here it is again. Thanks for watching. ruclips.net/video/6yXZvfoGsdc/видео.html
i watched 15 minutes for you to not show any results, and not show the results of the cleaning test, and not show the results of the solar tester device.
Why you didn't connect T2.? If T2 didn't connect how to get average temp in final report...
I always use t1 only so just one back of module temperature probe. Basically I’m comparing two tests that happen with in ten minutes or something like that of each other so it’s the delta between dirty and clean modules. I want to compare more than to make a super accurate quantitative value. So if the temps and irradiance are constant and similar that’s what I need.
Paul, another great detailed video. How have the CAB cable systems worked out for you? We have similar concerns with ours being installed now, low to the ground and the vegetation concerns
Well so far we have had them weed whack and spray a 4 or 6 foot wide path underneath those CAB trays. I found a bird nest in one but they are only about a year old now.
No shots of the results of the I-V curves. Seems like a fake promotional video
Yes I realized that after posting that and made a follow up video with results and explanations. Here is the link and I will make sure I put that in the discriptioin of the set up video. ruclips.net/video/6yXZvfoGsdc/видео.html
I realized people want to see the test results so I added a link in the description with the test results. Here it is again. Thanks for watching. ruclips.net/video/6yXZvfoGsdc/видео.html
The DC cables should goes burried in conduits
i watched 15 minutes for you to not show any results, and not show the results of the cleaning test, and not show the results of the solar tester device.
David, that is a good point, my goal was just how to set it up but I will plan a follow up video showing the testing and the report results.
Here are the Test Results and more ruclips.net/video/6yXZvfoGsdc/видео.html
Showw
Test Results and more ruclips.net/video/6yXZvfoGsdc/видео.html
Waste of 15 minutes
Just for you the Test Results and more ruclips.net/video/6yXZvfoGsdc/видео.html