Just want to say " perfection on peak" no words to express level of creativity & grip on art...👍👍 Keep growing n achieve milestones never imagined before...👍😊
اللهُم صلِ وسلم وبارك على سيدنا محمد وعلى آله وصحبه أجمعين وسلم تسليما كثيرا إلى يوم الدين حسبي الله ونعم الوكيل ماشاء الله تبارك الله لا قوة إلا بالله العلي العظيم
This is a wonderful design. The addition of micro cord to the basic design is an excellent idea and really makes the result very attractive. I do have a couple of questions for you. It looks like during the set up before you begin to weave, you bring your 2 cords back to the watch and make 2 more hitches giving you a total of 3. Do you find any advantage to do that over the traditional design where instead of hitches, the cords are just fed through the spring bar from the top and then the weaving begins. The only reason I can see for you to do that is to avoid having empty space on the spring bar because your spring bar width is 22-24 mm but 4 cords only takes 15mm. The other question I have is how did you terminate the cords when you finished the design? Your video does not show the female buckle and neither of the underside of the male or female buckle is shown. Thanks and best regards, Murray
Hello, thanks for the comment. First of all, I put all the finishes in the center of the back with a needle after knotting, cut them and melt them with a lighter, and the space of the clock pin is small, but it can be done enough. The cow hitch knot also has a fixation point. If you put the cord side by side and work it, it moves left and right, and it's the same when wearing it, so put a cow hitch knot. First, the cowhitch is single on the buckle and the pins are double. I hope this comment is helpful. If not, please leave a comment. It's 6:30 a.m. here and I answer as soon as I wake up.
Thank you. Please give me a good opinion. And you can use appropriate materials around you. When I write a translator in Spanish, I get a mistranslation and answer it in English.
@@all_knot_macher Lo modelos que ha echo con los tipos de nudos son muy profesionales y me gustan mucho, tengo una colección de 5 relojes y espero ponerles pulseras hechas con paracord y micro con el tejido hecho por usted. Gracias.
I have a LUMINOX, and considering making a band for it. But wondering how you got the watch band pins? Did you order some extras? Or use the pins that came with the rubber bands?
Black is 1.3 meters on one side, microcode is 1.2 meters.
4 года назад
Dont get me wrong, i like this watchband, but as tutorial thi fail hard..would be nice, have atleast one of those knots have without cut in video..and woud be nice to see how you make those strains.
Cow hitch in the middle of the first watch pin and then down with the buckle, double hitch knot, then back up with the pin, then the cow hitch knot, then the trilobite knot.
안녕하세요? 일단 본인의 손목 사이즈을 측정하시고 전체 길이를 얼만큼 하실지 정하셔야 합니다. 왜냐면 무브먼트 두께도 있고 아무래도 파라코드 두께도 있고 보통 손목길이가 18cm 정도면 전체 길이 5/8인치 버클 사용시 22cm하시면 될듯합니다. 무브먼트 두께가 있어서요.궁금한 점 있으시면 또 글 남겨주셔요.
Just want to say " perfection on peak" no words to express level of creativity & grip on art...👍👍
Keep growing n achieve milestones never imagined before...👍😊
اللهُم صلِ وسلم وبارك على سيدنا محمد وعلى آله وصحبه أجمعين وسلم تسليما كثيرا إلى يوم الدين
حسبي الله ونعم الوكيل
ماشاء الله تبارك الله لا قوة إلا بالله العلي العظيم
I have a question, does the bracelet length also count the watch size and the buckle that I use to connect?
Yes. Includes even the watch movement. The actual band length is not long.
Hello, can I have the info about the paracords you used? It's really beautiful and I'm going to do it. Thank you.
Hello, I used normal paracord 3.5-4m/m and tan color 1.18m/m microcode.
@@all_knot_macher Ok thank you.
How many meters do you use from the black and the gold ?
Hi?about gold2m and black one side 1.7m
@@all_knot_macher oh hi, i'm apologzie
What brand of watch is that , cool video
thank you. watch brand is LUMINOX
This is a wonderful design. The addition of micro cord to the basic design is an excellent idea and really makes the result very attractive. I do have a couple of questions for you. It looks like during the set up before you begin to weave, you bring your 2 cords back to the watch and make 2 more hitches giving you a total of 3. Do you find any advantage to do that over the traditional design where instead of hitches, the cords are just fed through the spring bar from the top and then the weaving begins. The only reason I can see for you to do that is to avoid having empty space on the spring bar because your spring bar width is 22-24 mm but 4 cords only takes 15mm. The other question I have is how did you terminate the cords when you finished the design? Your video does not show the female buckle and neither of the underside of the male or female buckle is shown. Thanks and best regards, Murray
Hello, thanks for the comment. First of all, I put all the finishes in the center of the back with a needle after knotting, cut them and melt them with a lighter, and the space of the clock pin is small, but it can be done enough. The cow hitch knot also has a fixation point. If you put the cord side by side and work it, it moves left and right, and it's the same when wearing it, so put a cow hitch knot. First, the cowhitch is single on the buckle and the pins are double. I hope this comment is helpful. If not, please leave a comment. It's 6:30 a.m. here and I answer as soon as I wake up.
Me gusta esto del micro cord aquí donde vivo es muy difícil conseguir esta cuerda.
Gracias Amigo.
Thank you. Please give me a good opinion. And you can use appropriate materials around you. When I write a translator in Spanish, I get a mistranslation and answer it in English.
@@all_knot_macher Lo modelos que ha echo con los tipos de nudos son muy profesionales y me gustan mucho, tengo una colección de 5 relojes y espero ponerles
pulseras hechas con paracord y micro con el tejido hecho por usted.
Gracias.
I have a LUMINOX, and considering making a band for it. But wondering how you got the watch band pins? Did you order some extras? Or use the pins that came with the rubber bands?
I used the original pin as it was.
Why did you cut off the beginning and end of each process? +
If you look at my videos, there is the same method of finishing as the beginning, and the video was short because it was a repetitive work.
@@all_knot_macher What are the name of the knots that you used?
Did you just make 3 cow hitches at the pin?
How long does it take?
each color
Black is 1.3 meters on one side, microcode is 1.2 meters.
Dont get me wrong, i like this watchband, but as tutorial thi fail hard..would be nice, have atleast one of those knots have without cut in video..and woud be nice to see how you make those strains.
Thanks for the advice, I had no experience since I filmed this video in the early days of RUclips. It would have been better if I filmed now.
Very pretty. What is the needle called?
micro stitch paracord needle
@@all_knot_macher thank you!
Did I miss where you started this project?
I think it would be good to start from both sides of the watch.
Cow hitch in the middle of the first watch pin and then down with the buckle, double hitch knot, then back up with the pin, then the cow hitch knot, then the trilobite knot.
갤럭시 워치 46mm에 맞는 22mm로해서 내손목에 마춰서 만들고 싶으나 으악 어려워보이지??????
안녕하세요? 일단 본인의 손목 사이즈을 측정하시고 전체 길이를 얼만큼 하실지 정하셔야 합니다. 왜냐면 무브먼트 두께도 있고 아무래도 파라코드 두께도 있고
보통 손목길이가 18cm 정도면 전체 길이 5/8인치 버클 사용시 22cm하시면 될듯합니다. 무브먼트 두께가 있어서요.궁금한 점 있으시면 또 글 남겨주셔요.
Paracord Knot Academy 알겠습니다
혹시 해당 영상과 똑같은 시계줄을 주문제작 가능하신가요?
답글 늦어 죄송합니다.제작 가능합니다.
시계뭉치 보내 주시고면 됩니다.
문의는 카톡 아이디 fzb8749입니다.
멋지내요 최고입니다