Thank you for sharing. I got it out! Now, got to wait for my wife to come home. So that, I can take the old alternator to Auto-zone for replacement. Its a pleasure to watch this. All in Him.
This guy is a LIFE SAVER. Maybe I should say MONEY SAVER.I hope to see EVERY video he post.As an amateur I changed the alternator in my 2002 Lexus es300....I followed every step and I DID IT ! THANKS !
Thanks so much for making this video. My alternator was not putting out any voltage, I could smell burnt electronics and it had a howling sound. I was able to change the defective alternator on my 2006 ES330 with confidence. Also thanks for identifying the nut and bolt sizes - it helps to lay out the tools for the job and not clutter up the bench.
Your no-nonsense approach is effective and appreciated. You’re a good teacher. Thank you for your efforts as you help me a great deal and no doubt save me a few hundred dollars! Bless you my friend.
You are a wonderful person 🙏🙏🙏 thank you so much for taking the time to do this and at night with a light ..... this helped ... May you be blessed for this video 😇
Was it the same alt? My 05 Lexus ES330 needs an alternator.. I have an 07 Scion tC parts car. Just curious if they will interchange... most likely not but I'm hoping
If you hear your alt on one of these cars start to make a funny noise, take note... there's about 90% chance the thing failed or is ready to fail. Mine was "groaning" the other night and in an hour and a half of driving later, it died completely. This video is a decent guide on how to do the job. Also a good idea if your alt has gone completely and you end up getting towed, etc... make sure to charge your battery completely before starting the car with the new alt installed. This way the alt doesn't have to beat itself up to charge the dead battery and you don't have to keep the car running for a long time to do so.
I used a mini/micro air ratchet to get that tension bolt out. I got one at harbor freight and ran it from a twin tube compressor that kept running short of air but worked. A normal 1/4 inch ratchet also works. I didn't even use a swivel.
Thanks for the video upload! Doing my dads Lexus tomorrow. Battery light came on dash, seems like the defective alternator did not provide optimal output as the battery did not charge. No dead cells. Off topic: kind of sad that Toyota still did not use auto tensioner drive belts even on this year/model. Corolla sure, but Lexus v6 rocking mechanical tensioner on an 05? Disappointed.
I cannot get the tension loose enough to get the belt on the alternator. Tried left. Alternator rose. Tried right. Bolt seems to loosen, then tighten. It’s driving me nuts. My vehicle is a 2005 RX330.
Hello, i just watched your video on how to change a alternator on a 2004-06 Lexus ES330. I did exactly what you videoed. And I'm having a serious issue. The brand new- not rebuilt alternator is burning up. And it got so hot, that it melted the belt. So, i replaced it again. And it's trying to do the same thing. Could you please advise me on what I should do next?
Hi great video.. l have a problem . I change alternator .and batery .but the batery light doesn't go off also it drain my batery againg you say something about not disconnecting the babety ..what could of happen if l didint diisconet the batery ..maybe relay or fuse ..l still have the problem thankyou
I recently replaced my alternator and the pulley is getting hot along with the belt squealing. Any ideas of what could be the cause? All the pulleys seem to be In great shape I can’t figure out why it’s doing it.
It took you 1 min to figure out how to install the tension bolt. I've been working on it for 4 hours no luck. I have to hire somebody to get that lined up.
@@spyuhh I paid my mechanic. But just keep adjusting it and trying. I could have done it but my arm was getting bruised pretty badly from trying for so long.
LISTEN to this guy or pay $480 like I had to for alternator repl. @ CarX I got a 2005 ES330 had a recent battery in but showed signs in dash lights flickering to no start at home never stranded It's the oldest of my 3 cars but STILL CLASSY
I used a mini/micro ratchet to get that tension bolt out. I got one at harbor freight and ran it from a twin tube compressor that kept running short of air but worked. A small 1/4 inch ratchet also works. I didn't even use a swivel.
Thank you, was making sure, some lady having trouble with hers she asked if i could do it, i said ive done it before for several cars but they are all different some are easy and some are hard, im actually on my way right now to do it lol
KEVIN CUELLAR I’m doing mine today as well. I got the Autozone alternator and it just went out. I hate changing the alternator in the ES300. It’s unnecessarily extensive process. I could change the alternator in my truck or corolla in a couple of minutes, but the Lexus takes time
KEVIN CUELLAR Absolutely and no belt tensioner... Also the engine compartment is pretty compacted. Not much space. I better get to it and change it right now
I can't believe you actually did that and did not say one curse word.
Impressive
Haha. Instead, he said "lovely" when the bolt fell inside the engine bay.
My first alternator replaced! Can’t thank you enough for talking me through. Rewatched in about 40 times and got it done. Great video!
You're welcome. Thanks for watching.
Thank you for sharing. I got it out! Now, got to wait for my wife to come home. So that, I can take the old alternator to Auto-zone for replacement. Its a pleasure to watch this. All in Him.
This guy is a LIFE SAVER. Maybe I should say MONEY SAVER.I hope to see EVERY video he post.As an amateur I changed the alternator in my 2002 Lexus es300....I followed every step and I DID IT ! THANKS !
I agree that because he mentioned the bolt sizes it assured me that I was on the right track. JUST PLAIN AWESOME 👍.
Did your ac go out? When your alternator went out?
Thanks so much for making this video. My alternator was not putting out any voltage, I could smell burnt electronics and it had a howling sound. I was able to change the defective alternator on my 2006 ES330 with confidence. Also thanks for identifying the nut and bolt sizes - it helps to lay out the tools for the job and not clutter up the bench.
You're welcome. Thanks for the great comment!
Your no-nonsense approach is effective and appreciated. You’re a good teacher. Thank you for your efforts as you help me a great deal and no doubt save me a few hundred dollars! Bless you my friend.
This instruction was right on the money for me, straight forward while also addressing the details. Many thanks. Peace.
You are a wonderful person 🙏🙏🙏 thank you so much for taking the time to do this and at night with a light ..... this helped ... May you be blessed for this video 😇
Thanks for the help. Just used this to replace the dead one in my son's car. Went a lot faster than I anticipated.
I just changed one on Scion TC yesterday and today I have to change one on a ES300. I appreciate your video.
Was it the same alt? My 05 Lexus ES330 needs an alternator.. I have an 07 Scion tC parts car. Just curious if they will interchange... most likely not but I'm hoping
Super awesome video thank you so much for sharing. I need to replace my alternator on my 2004 Lexus RX330 same motor same alternator I believe
I realy liked they way you explained step by step. Thank you
Thanks for the info, clear, straight-forward instructions. You have a BLESSED day as well!
Great video bud! Only took an hour and saved a lot of money bc of you. I owe ya a beer or 10!
Thanks for your detail and camera angles. You were a huge help!
No problem.
Great Explanation, THANKS
This was a great help! When I saw this video I figured where the noise was coming from and changed the alternator myself!
Thank you. Your video helped me figure out how to tighten my alternator belt.
Thanking you, wonderfully explained, its a masterpiece video, Hopefully I'll be able to do it with confidence.
Wow! Thanks a lot. Your video was perfect. Step by step. Helped me tremendously. Appreciate it much.
D
Thanks for this very thorough and easy to follow vid! I was able to replace my alternator with confidence!
Thanks for the video! Appreciate the step by step instructions.
Thank you for the video... now let's see how long it takes me to do the same thing.
If you hear your alt on one of these cars start to make a funny noise, take note... there's about 90% chance the thing failed or is ready to fail. Mine was "groaning" the other night and in an hour and a half of driving later, it died completely. This video is a decent guide on how to do the job. Also a good idea if your alt has gone completely and you end up getting towed, etc... make sure to charge your battery completely before starting the
car with the new alt installed. This way the alt doesn't have to beat itself up to charge the dead battery and you don't have to keep the car running for a long time to do so.
Excellent job! Very much appreciated, Keep up the good work! I can tell you're a Pro!
Thanks bro saved me 125 bucks......was a easy job
Thank you!! Great video. Helped us tremendously!
Great work! Thanks for the upload 🙏
Without question & undeniably the best alternator replacement video for the Lexus SUV here on Instagram period undisputed, Case-Closed!!!!!!!!!!👍😁💪😎💪
Thanks for video. Help me complete the job with no problem.
I really appreciate the info! Exactly what I needed
I used a mini/micro air ratchet to get that tension bolt out. I got one at harbor freight and ran it from a twin tube compressor that kept running short of air but worked. A normal 1/4 inch ratchet also works. I didn't even use a swivel.
God bless you, thank you.
That was awesome bro you just help me out a whole bunch I was able to do mine and record time with your video
Thanks bro for your effort
Thank you
Life saver, thanks for posting this video, it has an excellent content.
Thanks for the video upload! Doing my dads Lexus tomorrow. Battery light came on dash, seems like the defective alternator did not provide optimal output as the battery did not charge. No dead cells.
Off topic: kind of sad that Toyota still did not use auto tensioner drive belts even on this year/model. Corolla sure, but Lexus v6 rocking mechanical tensioner on an 05? Disappointed.
Thank you so much 🙏😇
Thank you! What do I do if belt smokes? Too tight? Trying to loosen but seems like adjusting bolt is hand loose already….
I cannot get the tension loose enough to get the belt on the alternator. Tried left. Alternator rose. Tried right. Bolt seems to loosen, then tighten. It’s driving me nuts. My vehicle is a 2005 RX330.
Thank you very much
Hello, i just watched your video on how to change a alternator on a 2004-06 Lexus ES330. I did exactly what you videoed. And I'm having a serious issue. The brand new- not rebuilt alternator is burning up. And it got so hot, that it melted the belt. So, i replaced it again. And it's trying to do the same thing. Could you please advise me on what I should do next?
What was your fix?
Did u first install an undersized alternator?
Hi great video.. l have a problem . I change alternator .and batery .but the batery light doesn't go off also it drain my batery againg you say something about not disconnecting the babety ..what could of happen if l didint diisconet the batery ..maybe relay or fuse ..l still have the problem thankyou
Does bolt go into the belt fastener first and then the alternator???
How powerful is your air ratchet? Mine is 50#ft,but won't turn two side bolts. Thanks
I have a 2005 Camry xle v6 with a 3.0, is this process as similar with the 3.3 Lexus
I recently replaced my alternator and the pulley is getting hot along with the belt squealing. Any ideas of what could be the cause? All the pulleys seem to be In great shape I can’t figure out why it’s doing it.
Did u overtighten the tensioner bolt?
Thank a lot. It's help to replace alternator.
Thank you for video, you help me to save much money :)
What type and model of electic screwdriver do you use at this video?
This is the same process (which I just completed) for a 2003 Toyota Camry v6 xle
It took you 1 min to figure out how to install the tension bolt. I've been working on it for 4 hours no luck. I have to hire somebody to get that lined up.
did u get it? i am at the same crossroad.
@@spyuhh I paid my mechanic. But just keep adjusting it and trying. I could have done it but my arm was getting bruised pretty badly from trying for so long.
Took me half an hour omg
I hate that damn thing
Does the lock bolt go on the fastener thing first and then onto the
LISTEN to this guy or pay $480 like I had to for alternator repl. @ CarX
I got a 2005 ES330 had a recent battery in but showed signs in dash lights flickering to no start at home never stranded
It's the oldest of my 3 cars but STILL CLASSY
How can I get the pivot bolt off without a swivel socket??? Any help would be appreciated!!! I’m down right now and this is my only vehicle.
Torrian Frazier you may be able to use a 1/4 in ratchet and 12mm socket. I've never done it that way, but could be possible.
I ended up using a universal joints with hand tools which helps get you a place to swing the ratchet, if only a little.
I used a mini/micro ratchet to get that tension bolt out. I got one at harbor freight and ran it from a twin tube compressor that kept running short of air but worked. A small 1/4 inch ratchet also works. I didn't even use a swivel.
I want to know what is right order of the color for alternator plug
My 2002 Lexus alternator belts are two belts. Why may I ask
Thanks you help me thru it
Would this be the same process for a 2002 lexus se300
Yes, that's the one I have. It's the same process
Thank you, was making sure, some lady having trouble with hers she asked if i could do it, i said ive done it before for several cars but they are all different some are easy and some are hard, im actually on my way right now to do it lol
KEVIN CUELLAR I’m doing mine today as well. I got the Autozone alternator and it just went out. I hate changing the alternator in the ES300. It’s unnecessarily extensive process. I could change the alternator in my truck or corolla in a couple of minutes, but the Lexus takes time
Lol i think that bracket thing its what makes it a harder process lol, ive done some in like 20 min max
KEVIN CUELLAR Absolutely and no belt tensioner... Also the engine compartment is pretty compacted. Not much space. I better get to it and change it right now
Blessings, John 3:16. Jesus loves you.
that bracket is a pain in butt
Thank you for this, it was super helpful
thank you
This was a very good demonstration, helped me a lot! Thanks for taking the time to video.