Svaka cast 😊 Veoma mi je drago da je neko sa nasih prostora ovoliko marljiv, trudi se i svet prepoznaje kvalitet. Da li bi mogao u opisu klipa da postavis koji su to delovi korisceni za pravljenje ovoga, kojih dimenzija itd itd ...? Veliko hvala i pozdrav 👋
Watched your diy hose reel build which lead me to here AWSOME work going to build this as well. Subscribed you definitely got some talent and good ideas 👍. Is there anything you would change about this build if you did it again.cheers
Задумка отличная, лайк! Но есть вопрос - расстояние между центральным валком и крайними при изменении угла меняется не пропорционально, оно разное, выходит, что гибка осуществляется только при прокате в одну сторону?
You need to put grooves in the bars that you’re rolling your stock with to keep it straight otherwise instead of a circle you’re going to end up with a spring. Jim
No, you don't need grooves. Just make sure you're lined up straight and it will roll straight. It's not gonna stray off coarse once you start rolling as long as you rollers are even with each other
@@peChoOO You're very welcome. If you like, you can contact me at jon at our url, and I'll give you a coupon code so you can join our forum for free and post your videos whenever you like. Looks like you're one of us :)
Nice roll. Good job on the build. May I suggest one thing, don't roll your metal both directions. Only go one way and you'll get much better results. Rolling it both ways is like rolling it then backfilling it over and over again and that gives you different degrees of roll. But seriously, good job
Mate I love your videos and your work. The content is outstanding But can you please think about losing the music. Its annoying and distracting Just a gentle request
Svidza mi se :D...trebao bi napraviti ovako nesto da imam kuci, nije los alat. Samo nisi mere pisao. Gde si nasao semu, deluje mi kao da si negde video i imao mere.
Hi I got the idea from make it Extreme ? I also made a greenhouse for myself. make an electric drive. and on the main shaft knurling. and fasten the loop!!!
![YoungBoy Never Broke Again - Missing Everything [Official Video]](http://i.ytimg.com/vi/dTYeMZGzOzw/mqdefault.jpg)
I would like to Thank You for your KIND support!!!
Muy buena maquina quiera comprar una
@@mico26az p
Brilliant build my friend.. Really enjoyed watching this one..
ABSOLUTELY OUTSTANDING. THANK YOU FOR SHARING.
Extra ordinary roller bender by peChoO. Sprocket to make rolling process easier.. love the idea. Thanks peChoO.
Can you post a detailed sketch to help on sizes etc, many thanks.
Looks a brilliant design
Many thanks
Rich
Svaka cast 😊
Veoma mi je drago da je neko sa nasih prostora ovoliko marljiv, trudi se i svet prepoznaje kvalitet.
Da li bi mogao u opisu klipa da postavis koji su to delovi korisceni za pravljenje ovoga, kojih dimenzija itd itd ...?
Veliko hvala i pozdrav 👋
So much talent!Really enjoyed all of your project videos.I wish i was as much talented and skillful as you are.
Svaka cast kao I uvek na nivou zadatka, pozdrav za najboljeg Pirotskog majstora. Samo cepaj
Decko odlican rad , vrh nema sta.
ΕΙΣΑΙ ΤΕΛΕΙΟΣ ! ΜΠΡΑΒΟ ΠΟΛΥ ΩΡΕΑ ΔΟΥΛΕΙΑ!
Bravo Peko majstore 👍🏻💪🏻
It's ART...Great job...from Argentine fans !!!!..
One must possess big knowledge of physics or mechanics or whatever to be able to pull off something this creative.
Du superbe travail!! Autant dans l'idée que dans son exécution! Franchement, Bravo !
Bravo kako ti samo nadjes resenje za sve 💪🤙
Now that is proper clever
Like from Pakistan good work
Nice job mister peChoO... Keep going on... 👍👍👍
Great job sir
Very smart!
You 're a genius!
Bravo, odličan projekat😃
So I have to get an welding machine! Great!
Hey man I really really need to build one of these can you list all the materials you used for this build... Thanks
Grande bellissimo progetto 😜😜
Clever design, well-executed. Subscribed.
Wow, me parece espectacular tu ingenio, felicidades!!
So nice and perfect job
So wonderful
So practical
Congratulations
👍👍👍👍👍
Hamid BENABBOU from Morocco
Watched your diy hose reel build which lead me to here AWSOME work going to build this as well. Subscribed you definitely got some talent and good ideas 👍. Is there anything you would change about this build if you did it again.cheers
Odličan posao. Možeš li dati dimenzije lima sa rupama na koji ide ležaj UCF 205?
Impressive work
Superexcelent work.
Like from CZ :-)
Hammergeile Sache. 👍👍👍
Задумка отличная, лайк! Но есть вопрос - расстояние между центральным валком и крайними при изменении угла меняется не пропорционально, оно разное, выходит, что гибка осуществляется только при прокате в одну сторону?
You need to put grooves in the bars that you’re rolling your stock with to keep it straight otherwise instead of a circle you’re going to end up with a spring. Jim
No, you don't need grooves. Just make sure you're lined up straight and it will roll straight. It's not gonna stray off coarse once you start rolling as long as you rollers are even with each other
Muy bueno lo venden ?
Follow you from Egypt Everything you make is wonderful❤❤😀😃
Superb... great.
You loved🤩🤩🤩🤩🤩🤩
Excellent, congratulations
fantastico... maravilhoso e fácil de fazer, tenho 72 anos e me animou fazer esta roladora São José do Rio Preto SP- JMartins
Wow, you are incredible !
Really nice!! 👍🏽💪🏽
Looks like a work in progress, when you really perfect it, make another video for us.
Wow good job., sir
Nice one... Maybe Im gonna try this at home! ;)
Pozdrav,svaka čast kako radiš,zanima me koju smešu koristiš za mig zavarivanje ,hvala unapred,pozdrav👏👏👏😃😃🇷🇸.
Hola, me gusto mocho la dobladora, podrías enviarme el listado de materiales para hacerme una?? Gracias y felicitaciones.
+ добавить вертикально различные насадки для накатки сбоку профиля (для красоты или жесткости).
verry skillful !!!
Başarılı,seyredilir
Beautiful, subscribed. We posted your video on our homemade tools forum yesterday, credited to you of course :)
Thank You,
I appreciate it
@@peChoOO You're very welcome. If you like, you can contact me at jon at our url, and I'll give you a coupon code so you can join our forum for free and post your videos whenever you like. Looks like you're one of us :)
Can you please tell me where you got the green bearings? There are so many different types of bearings and I have no idea what I am looking at.
Excelenteee! PechoO¡¡¡
Perfect
Nice roll. Good job on the build. May I suggest one thing, don't roll your metal both directions. Only go one way and you'll get much better results. Rolling it both ways is like rolling it then backfilling it over and over again and that gives you different degrees of roll. But seriously, good job
لطيف هذا العمل.. احسنت
Can u give me the PDF copy.. , will be appreciate 😁
I'm going to make one of these.. thank you.
Parabéns solução muito inteligente!!🇧🇷👍👍🇧🇷
Muito bom seu trabalho, gostei muito parabéns continua postando me deu ideia de fazer um pra mim
muy bueno. like y suscrito
Hmmmm !! jsi borec !
Sangat bagus keren luar biasa 👏👏
Мне понравилась как в потолок попал 😂
interesante artilugio
Svaka cast brate, pozdrav iz Obrenovca!
Koji co2 aparat koristis?
I wonder if I mighty get the plans how thick can it bend and was going to say what about getting a corded drill with forward and reverse
I am impressed. You did a great job sir. 👏👏👏Subscribed. Thank you for sharing this
Mate I love your videos and your work.
The content is outstanding
But can you please think about losing the music. Its annoying and distracting
Just a gentle request
Brate, svaki ti je dobar...
Muy bien video gracias. Tiene planos para esta rola dora
To je umetnost...
Ur just awesome
Excelente Parabéns.
wonderfull!!!!
Which welding machine do u use ??
Moram ti priznati da si me oduševio!
Hey awesome job man, what kind of paint do you use for your projects?
What is the name of that bearing?
Hi, I want the size of the welding weld used
👍
Svidza mi se :D...trebao bi napraviti ovako nesto da imam kuci, nije los alat. Samo nisi mere pisao. Gde si nasao semu, deluje mi kao da si negde video i imao mere.
Which camera do you use to record videos?
sony RX100 I
@@peChoOO Thanks
Moze li workshop tour
Hi I got the idea from make it Extreme ? I also made a greenhouse for myself. make an electric drive. and on the main shaft knurling. and fasten the loop!!!
Jaki to profil i jaka grubość
Alal ti vera!
👍👍👍👍👍👍
Esti român ?
This video is missing one thing.... a million ads!
Si pudieran decir medidas para saber como hacerlo gracias
Топ
👊🏽🤩😂🤣😂🤣😂😉👍🏽top.
🌿🌸😍
👍🌹🤝🤝🙋♀️
عفارم
Have ever set fire to those lace curtains when grinding next to them? 😂
This guy makes real good things but for so many people watching his vids and asking questions and no response.. he is just being a dick. FTP