You're an exception to much of what I have seen in all these videos in that you are using an squematic and solving a problem while understanding the meaning of the diagram. Excellent job man!
Thank you very very much brother.Always keep an eye on the new. Actually we benefit from you and learn from you.thank you He continued according to God and the profession loved us
Hi, I have same laptop, very left LED lighting. I followed your steps but I have B+ (19v) at small RZ13 -56k resistor. It turned out that QZ9 has+5v at its gate which is signal “SUSP”, which coming from QZ8 having 0v at its gate - which is signal “SUSP#” coming from pin 116 of 128pins-controller UE1 (KB9012QF-A3) and UE1 has: pins 9,22,33,67,96,110,111,112 = +3.36volts; pin125=+3.39v, pin102=0volt (all is correct according to schematic). This way that signal “SUSP#” (0v) suspending (blocking) +3VS AND the same way MANY OTHER voltages: +5VS, +1.5VS, +3V_PCH, +VCC_CORE, etc. I checked UE1 specifications but could not find any info about why UE1 can have that signal (0 volts) on its 116 pin - nothing at all. Any suggestions about that? I checked BIOS battery - it was ok, but I changed it anyway and still no help. (so, present are following: B+, +5VALWP, +3VALWP) Thank you.
I have a problem with my dell p inspirion3521 I5 as my display got shorted with me at its terminal socket on the display itself so there was a burnt-out at it so also the cable terminal got shorted but the other side terminal is OK now if I buy a new display along with the new cable for it and replace it will the display work or there might be other problems in the mother board because said now with out display screen power light is on but no bees sounds
Sir mere pass dell inspairon 15 3521 touchscreen laptop hai, light blinking kar rha hai keyboard me power nahi aa rha hai, display bhi nahi aa rha hai, sir aapke pass laptop babwana ho to kaise banwayenge, mai UP EAST se hu
Thanks for your comment, I already say in my video there is two way you can fix this problem if you have parts which is damage you can change, if you don’t have so you ca bypass.
@@Laptop_repair_zone : Yes you did say that but sorry I still don't agree with the way you did the repair, from the videos I've seen so far I'd say your a pretty good tech and I respect that. But repairs like this, lower that level of respect. If I didn't have the part I needed or an equivalent in stock or on a scrap PCB then the customer would be waiting for me to order the part in.
RSC Electrical I know and I also agree with you, but customers they don’t have time they want instant repair less than 1 hour,than what should we do? And customer also agree to bypass, and pay for it .
@@Laptop_repair_zone : Over here in the UK, the only people that normally get 1 - 2 hour repairs would be Commercial or Industrial customers and for that sort of repair we have large stocks of parts and a good set of cross reference books. If you don't mind me asking: Where are you based ?.
Thanks for your comment, first check there is any short or not to +3vs and +5vs line, then check 3v pch if this voltage not present to drain then short that mosfet and check.
Hello, I have here the same mb that shutdown the charger and it has burning the pq101. I had already replaced but it burns again. Could you please help me?
You're an exception to much of what I have seen in all these videos in that you are using an squematic and solving a problem while understanding the meaning of the diagram. Excellent job man!
thanks for your comment.
Thank you very very much brother.Always keep an eye on the new. Actually we benefit from you and learn from you.thank you
He continued according to God and the profession loved us
Thanks for your comment.
Great learning experience with ur wonder full teaching &explanation.. 👍
Very nice advanced laptop repairing!! Gongrats on the repair!
thanks for your comment.
good day sir..new subscriber here....im hoping more videos to come and learned a lot from you..thank you sir.
thanks for your comment.
Never give up.. .. good job.. keep it.. update...
thanks for your comment.
Thank you .. god bless you.. . This video very helpful for me thanks...
You good man👍👍👍👍👍👍
thanks for your comment.
Laptop Repair Zone you deserve more than a comment bro✌️✌️✌️✌️
Nice job... i did same job..and done.. thanks for video..
Great job you have improved spoken English
I have the same MB with 7 beep’s missing +VCC_GFXCORE_AXG any solution?
thanks for your comment.
Thank you very much brother.Good job
thanks for your comment.
Hey next to the card reader on the left hand side has 2 SMD capacitor ,what are those for ?
Time in video is 2:21
Knowledge full video
Grreat video. Thanks.
I have a question. Can I remove the display and use only the tv screen.using hdmi cable? Is it possible?
Now this is excellent work; also,
Hi, I have same laptop, very left LED lighting. I followed your steps but I have B+ (19v) at small RZ13 -56k resistor. It turned out that QZ9 has+5v at its gate which is signal “SUSP”, which coming from QZ8 having 0v at its gate - which is signal “SUSP#” coming from pin 116 of 128pins-controller UE1 (KB9012QF-A3) and UE1 has: pins 9,22,33,67,96,110,111,112 = +3.36volts; pin125=+3.39v, pin102=0volt (all is correct according to schematic). This way that signal “SUSP#” (0v) suspending (blocking) +3VS AND the same way MANY OTHER voltages: +5VS, +1.5VS, +3V_PCH, +VCC_CORE, etc.
I checked UE1 specifications but could not find any info about why UE1 can have that signal (0 volts) on its 116 pin - nothing at all. Any suggestions about that? I checked BIOS battery - it was ok, but I changed it anyway and still no help. (so, present are following: B+, +5VALWP, +3VALWP)
Thank you.
Thanks for your comment.
Susp# before power button 0v after power button 3v
Susp before power button 5v after power button 0v
Great! very good job. Very informative.
Thanks for your comment. Please share my videos and channel.
thank you so much sir, i just fixed my costumers laptop by following your procedure. 🙂👏👏👏❤
Good solutions sir
thanks for your comment.
Thanks bro God bless u
Thanks for your comment.
Thank sir , I appreciate
ncie work sir .. i have this mother board with other problem the power led blinking 1Amber 1 White , Amber White ,,, what is the right solution ??
Thanks for your comment, is your laptop running?
I like your clip.
Thanks for your comment, please share my videos.
Is the 3v_pch mosfet from graphics chip?
this guy is good really good at what he does.what is contact?
Thanks for your comment.
I have a problem with my dell p inspirion3521 I5 as my display got shorted with me at its terminal socket on the display itself so there was a burnt-out at it so also the cable terminal got shorted but the other side terminal is OK now if I buy a new display along with the new cable for it and replace it will the display work or there might be other problems in the mother board because said now with out display screen power light is on but no bees sounds
I don't understand using schematic the way u are mentioning andmeasuring signals..
Pls can u help ..what are the important signals for power
Thanks for your comment,you must need schematic diagram to repair laptop.
Good job.
thanks for your comment.
thanks
what you said every vales are same but Everything working but display not turning on what to do
Thank u bro 😊💓😁
Sir mere pass dell inspairon 15 3521 touchscreen laptop hai, light blinking kar rha hai keyboard me power nahi aa rha hai, display bhi nahi aa rha hai, sir aapke pass laptop babwana ho to kaise banwayenge, mai UP EAST se hu
good job
thanks for your comment.
whenever I plugged in my charger, charger's indicator light went off. what should I do now? Is it got short circuit?
thank you sir
thanks for your comment.
brother good one
Thanks for your comment.
Please, I have the same problem. The processor voltage on the pl 701 -- 2.3 volt
Great job Sir. I have one having this same problem. I am gonna try it too
5 v near the ram capacitor in not present what to do,... It show 4.7 v
It was lovley video but i check all the voltages are there still no display need your help
Thanks for your comment, any beeps?
@@Laptop_repair_zone just one beep and QV4 have no voltage at drain and QV5 hv voltages at drain but not othet sides
1 beeps means BIOS error, please flash bios then try.
Wow.
schematic downloading site link pls give me
You make some good video content but I don't agree with bypassing components, they're there for good reason.
Thanks for your comment, I already say in my video there is two way you can fix this problem if you have parts which is damage you can change, if you don’t have so you ca bypass.
@@Laptop_repair_zone : Yes you did say that but sorry I still don't agree with the way you did the repair, from the videos I've seen so far I'd say your a pretty good tech and I respect that. But repairs like this, lower that level of respect. If I didn't have the part I needed or an equivalent in stock or on a scrap PCB then the customer would be waiting for me to order the part in.
RSC Electrical I know and I also agree with you, but customers they don’t have time they want instant repair less than 1 hour,than what should we do? And customer also agree to bypass, and pay for it .
@@Laptop_repair_zone : Over here in the UK, the only people that normally get 1 - 2 hour repairs would be Commercial or Industrial customers and for that sort of repair we have large stocks of parts and a good set of cross reference books. If you don't mind me asking: Where are you based ?.
7 beep help me i found 0V in PL600 and 0V in PL700, where is the problem dell 3521
+3vs and +5vs is not present 4:03 I have 19 voltage in second resistor. Now where should I check?
Thanks for your comment, first check there is any short or not to +3vs and +5vs line, then check 3v pch if this voltage not present to drain then short that mosfet and check.
Hello, I have here the same mb that shutdown the charger and it has burning the pq101. I had already replaced but it burns again. Could you please help me?
Thanks for your comment, 19 volt short to GND please fine short component by inject voltage from DC power supply then replace .
How can I know b+.thanks boss and what is even b+
Thanks for your comment,i already explain in this video.
i dont have eny idea for schematic downloading sites pls help me
Thanks for your comment.please search in google.
ok sr
thanks for your comment.
how to fix dell inspiron 3542 flickering and vertical lines problem?
Thanks for your comment,you need to change your laptop LED screen.
Tnx
You most welcome, please keep supporting and sharing my video.
😍
Красава
BIN FAILS PLZ
Nice sir good sir phone number
Nice job please can I get your email 📧
How can I contact you
thanks
thanks for your comment.