johansson mikrokator comparator | construction and working of johanson mikrokator

#modimechanicalengineeringtutorials,
#mechanicalmagicmechanicallearningtutorials,
In this video, I explained about Mechanical Comparator.
A Johansson Mikrokator (also called Abramson's movement) is a mechanical comparator used to obtain mechanical magnification of the difference in length as compared to a standard. It works on the principle of a button spinning on a loop of string. A twisted thin metal strip holds a pointer, which shows the reading on a suitable scale. Since there is no friction involved in the transfer of movement from the strip to the pointer, it is free from backlash.
A metallic strip is twisted and fixed between two ends as shown. Any longitudinal movement (in either direction) will cause the central portion of the strip to rotate. One end of the strip is fixed to an adjustable cantilever and the other end is fixed to the spring elbow. The spring elbow, in turn, is connected to a plunger, which moves upwards or downwards. The spring elbow, which consists of flexible strips and a stiff diagonal acts as a bell crank lever and causes the twisted strip to change length whenever there is a movement in the plunger. This change in length will result in a proportional amount of twist of the metallic strip. The magnification can be varied by changing the length of the spring elbow.
The instrument is initially calibrated to the standard, and the zero is set to this value. Then, the test specimen are placed on the measuring table and are slid below the plunger of the instrument. Any difference in the measured dimension of the specimen will result in either the lowering or rising of the plunger. The lowering or rising of the plunger will cause the bell crank lever to move in forward or backward direction, and in turn, will twist or untwist the metallic strip. The centre line of the strip is perforated in order to prevent excessive stress.
__________
Welcome to My RUclips Channel
MODI MECHANICAL ENGINEERING TUTORIALS.
This channel is Containing of fundamental concepts of Mechanical engineering.
In some videos passing trick of subjects of engineering, passing tricks for GATE,PSU,UPSC,GPSC etc…. examinations.
Subscribes, like and share
In My Channel Easy explanation about more Mechanical engineering concepts, which are really helps you in your future.So,
Subscription Link: / @modimechanicalenginee...
Prof. Mayur S. Modi
Mechanical Measurement and Metrology.
Comparators | Application |characteristics
• Comparator explained |...
Dial Indicator | Principle | Construction and Working | Application | How to Used
• dial indicator | worki...
Johansson Mikrokator | Mechanical Comparator | Construction and Working with Application
• johansson mikrokator c...
Reed Type Mechanical Comparator |Construction | Working | Application |Indirect Measurement
• reed type mechanical c...
Sigma Comparator | Metrology | Mechanical Measurement | Construction ~ Working and Application
• sigma comparator | Met...
Mechanical Optical Comparator | Metrology | Mechanical Measurement
• mechanical optical com...
Pneumatic Comparator | Solex Comparator | Comparator |
• pneumatic comparator |...
Zeiss Ultra Optimeter | comparator | Metrology | Mechanical Measurement
• zeiss ultra optimeter ...
Electrical Comparator | Working principle LVDT | How to use LVDT | Metrology|Mechanical Measurement
• electrical comparator ...
Effective Diameter by Two Wire Method
• Effective Diameter by ...
Best Wire Size Method | Effective diameter | Screw thread
• best wire size for thr...
Classification of Fits | Types of Fits | Definition | Clearance |Interference |Transition
• classification of fits...
Clearance fit in details | Classification of fit | Metrology | Mechanical Measurement
• clearance fit | types ...
Interference fit | Explained |Mechanical Measurement | Metrology
• Interference fit | typ...
Transition fit | Classification of fit | Mechanical Measurement | Metrology | GATE
• Transition fit | Class...
Allowance | Difference between Allowance and Tolerance | Mechanical Measurements.
• Allowance | Difference...
Hole and Shaft Basis System | Clearance fit | Interference fit | Transition Fit |Metrology
• hole basis system and ...
johansson mikrokator,johansson mikrokator comparator,johansson mikrokator animation,johansson mikrokator working,johansson mikrokator working animation,johansson mikrokator construction,mechanical comparator,how mechanical comparator works,how johansson mikrokator works,working principle of mechanical comparator,johansson mikrokator comparator animation,construction and working of johanson mikrokator,learn engineering,engineering explained,metrology by nptel,ekeeda

[@lokeshpatel9350]

KEEP IT UP

[@modimechanicalengineeringt8780]

Thanks

[@xoxo.1732]

ghar ghar modi
har har modi❤

[@royalsoldier9098]

हिंदी में नही है क्या