Thanks mate for the great video, what about if we need to connect outdoors by wifi? could you please show us how to do it as there is sometimes its impossible to run cables
In vdp DS-kV6113-WPE1 there is a terminal AIN1 and GRD, with 5v in open condition, to connect door sensor alarm, after connecting a reed swtich door sensor, where to configure alarm, whether alarm will display in Monitor DS-KH6320-WTE1 or in Hikiconnect phone. I have connected a magnetic reed contact on the terminal but no alarm aprears anywhere. Please help
u have to check on ivms-4200, under "Door Parameter" try refer this on ur scenario. Sorry i didnt tried this before. ruclips.net/video/IAf5V2dRUlM/видео.htmlsi=xb5pxrB2M-Y_2gEG
Hi bro, sorry below are very technical. I hope u understand, if not understand. Try get somebody to help u do or look for Hik engineer at ur region. if KV6113 running WiFi and powered by 12DC. This I have tested and working but need very tricky. 1. Make sure u get the latest firmware from Hik Website or from Local Dealer 2. Remember, your WiFi router make sure need do Reserved IP for all ur device include KH6320 and KV6113 as well. (Means lock ur MAC address and that certain IP, obtained by DHCP) 3. Your device, KH6320 and KV6113 must run under DHCP. (Running static IP is a bad idea, cause this device behaviour is under Wifi must run DHCP, if u run static IP, it will refer to ur LAN port) 4. that above thing is everything need to monitor to do. After that, nothing issue. If still issue, u try ping ur WiFi device, the “ms” cannot more than 30ms. That all I can advices.
Can, but the SSID must be simple as “admin123” it not able contain symbol. Make sure need to do IP reserve on outdoor as well, if not the IP will run, den intercom will not function.
@@technicalmani1000 thw WiFi router will give DHCP to the indoor however we need to bind the IP for indoor station WiFi become static. The indoor station, it set static IP, will face some issue on connection to outdoor. However, we need to static it from router. Want to know details, u can email me secur1ty.fai@gmail.com
Thanks mate for the great video, what about if we need to connect outdoors by wifi? could you please show us how to do it as there is sometimes its impossible to run cables
My Indoor Unit does not show up when I try to change my Wifi Router after the initial installation was done.
If you have change your wifi router you have to redo the setting again
In vdp DS-kV6113-WPE1 there is a terminal AIN1 and GRD, with 5v in open condition, to connect door sensor alarm, after connecting a reed swtich door sensor, where to configure alarm, whether alarm will display in Monitor DS-KH6320-WTE1 or in Hikiconnect phone. I have connected a magnetic reed contact on the terminal but no alarm aprears anywhere. Please help
u have to check on ivms-4200, under "Door Parameter" try refer this on ur scenario. Sorry i didnt tried this before.
ruclips.net/video/IAf5V2dRUlM/видео.htmlsi=xb5pxrB2M-Y_2gEG
can the MASTER Station DS-KM9503 possible connect to the Indoor Station thru Wifi connection?
Sorry this device does not support wifi connection
What is the difference between DS-KV6113-WPE1, DS-KV6113-WPE1(B) and DS-KV6113-WPE1(C) panels?
that is version, ofcoz get the latest (c) panel are the best to get most compatible.
Is it possible to connect 3 indoor and 3 outdoor units together? I want all 3 indoor units to ring whenever any one outdoor unit is pressed.
Hi, I never try this setup before. But you could try to follow my previous video to try the setup. I belive it can works too
Part 1 : ruclips.net/video/mTr3LqZeHl8/видео.html
Part 2 : ruclips.net/video/3qkzsaGH4eg/видео.html
Part 3 : ruclips.net/video/1nzL0WRyFkA/видео.html
May i use ds kis-603 without wifi connection??
Yes u can, for the setup u can refer this link. ruclips.net/video/mTr3LqZeHl8/видео.html
if we are connecting the indoor and outdoor unit wirelessly, what is the maximum distance that can be between them?
Their using IP, so if have networks switch, will be 80-100m
@@securityproducthelper2971 sir I'm talking about wireless through wifi
Without cable connection between indoor and outdoor unit
@@SatishMandan by wireless, are depend AP or router coverage, cannot more than 10ping
@@securityproducthelper2971 ok sir
Thankyou so much
Sir, I've one question.. In DS kis 603p kit if we connect indoor and outdoor unit on same wifi network, will they works even without internet??
Hey my friend! Great review. Only when the ds-kv6113 run on wifi and 12v power supply the monitor dont ring. Please help hero!
Hi bro, sorry below are very technical. I hope u understand, if not understand. Try get somebody to help u do or look for Hik engineer at ur region.
if KV6113 running WiFi and powered by 12DC.
This I have tested and working but need very tricky.
1. Make sure u get the latest firmware from Hik Website or from Local Dealer
2. Remember, your WiFi router make sure need do Reserved IP for all ur device include KH6320 and KV6113 as well. (Means lock ur MAC address and that certain IP, obtained by DHCP)
3. Your device, KH6320 and KV6113 must run under DHCP. (Running static IP is a bad idea, cause this device behaviour is under Wifi must run DHCP, if u run static IP, it will refer to ur LAN port)
4. that above thing is everything need to monitor to do. After that, nothing issue.
If still issue, u try ping ur WiFi device, the “ms” cannot more than 30ms.
That all I can advices.
@@securityproducthelper2971 can you please share a video. Where you from?
@@securityproducthelper2971 you are mine hero!!!!
Hi can the outdoor can connect by WiFi
Can, but the SSID must be simple as “admin123” it not able contain symbol.
Make sure need to do IP reserve on outdoor as well, if not the IP will run, den intercom will not function.
Can I install 3 indoor monitor?
Yup, can. U can make 1 outdoor, 3 indoor
@@securityproducthelper2971 can I configure in indoor station or I need laptop.
If 3 outdoor station cause I have 3 gate can install?
Wifi router ip static or DHP
@@technicalmani1000 thw WiFi router will give DHCP to the indoor however we need to bind the IP for indoor station WiFi become static.
The indoor station, it set static IP, will face some issue on connection to outdoor. However, we need to static it from router.
Want to know details, u can email me secur1ty.fai@gmail.com
Gargabe