Glad that you finally like it! We have been adjusting various details these weeks, and apart from magnets and tension, we have also changed the accessories, added a pamphlet to introduce the difference among the four versions. As for the reason why we put so many rings in maglev, it's because if there are only 2 rings, the tension will change sharply with the distance change. We add more rings to make the tension change closer to linear, which will be more stable than traditional maglev. We set these cubes at competitive prices, hope more people would like to have a try on it and chose Tianma X3 as your main!
@@moretrycube6882 It must've had a link. RUclips usually deletes those. Anyway, congratulations! Responding to the community is one of the best ways of gaining our trust and respect. I'm now personally considering your team as a potential Gan Hype Breaker.
I honestly can’t wait to buy the snap one. I have a gan 12 which I currently main but the snap might just squeeze in there :) Edit: I just got the tengyun from the cubicle and holyyy it’s good
Most importantly: This needs more likes! Also props to MoreTry for listening to the feedback and making some improvements and thanks for the updated video.
Engineer here: IMO the multiple magnets is super interesting TLDR potentially more linear (spring-like) force curve & varying number of magnets adds another slightly different stiffness adjustment. These magnets are in series repulsion based on how this is marketed and how they stack when out of the core but still on the screw. One of the core engineering differences between maglev and spring compression is the nonlinear force curve seen in maglev. It's explained really well in a post on r/Cubers. Because only a fraction of the compression force- distance curve is used, the maglev ends up feeling approximately linear (like a spring). However, as you move the compression window on a maglev, you’re not only moving the preload force, but the area of the curve you operate at, meaning as you tighten the cube you have more nonlinear effects. Might serve to make the operating range more linear but not sure off the top of my head. IDK how useful it is, but varying the number of series magnets would allow a third adjustment variable which controls the area of the compression curve you’re operating at (aka the nonlinearity / stiffness ratio) at a potentially lower cost than providing lots of replacement magnets. Not sure how much of a noticeable effect either the linearity or extra adjustment would have but either way it’s super interesting and innovative!
@@thesphyrth All the extra magnets might be a bit fiddlier to reassemble. I suspect they didn't market /consider the extra adjustment because of that and I imagine it's quite difficult to tune given it's so dependent on the tension setting, but I'm a perennial tinkerer so I'd play with it for sure. The normal 2 adjustment mechanisms should be just as easy as in normal cubes though(it looks identical to my rs3m .
Magnets spring rates are progressive, the difference between setting 5 and 6 will be more than 1 and 2. Moretry Man said that by using 6 weaker magnets with smaller gaps between makes it more linear, still a curve but closer to a straight line. As a mountain biker who messes with suspension a lot, I find making a progressive thing more linear very interesting.
I believe they were initially going for the +2 Finisher with their original magnet strength, but failed. Their Snap Version seems to be their real flagship. And at least now we can see why they don't offer adjustable magnets, and why there are 4 versions. They are now essentially different cubes.
I feel like I should get the maglev one just for the purpose of stealing 2 of the 6 magnets to cram into my 3d design 4x4 (and maybe even 6x6, depending on whether I get a 3d printer) The maglev magnets appear smaller the RS3 ones (unless someone measures them and proves me otherwise) so it might be easier to deal with the space constraints of an even cube.
My main cube now is MoreTry Tianma X3 Triple (Snap) and it feels really amazing. I just need to learn new alg so I can reach sub-15 and sub-10 if possible
Hey guys. Nice video. Just wanted to ask if the drawings for the giveaway already happen. And if it did,who won? I entered and can't remember the drawing day. Thanks.
Sad to hear that the magnets have been made weaker. I was looking forward to a cube with super strong magnets, not really for speed, I just really like the feel of strong magnets. Oh well, I will probably give this one a miss now. Glad I didn't pre-order it yet.
I actually prefer the term "Snap" over "Leap". The former makes more sense if you think about it. They try to accomplish the same thing using different mechanisms. So they won't get into any patent issues.
@@thesphyrth they actually behave differently. The Leap uses attracting magnets to align the cube from above 30° while this one uses repelling magnets to "snap" past the 45° mark. However, this one doesn't fully align the cube
Glad that you finally like it!
We have been adjusting various details these weeks, and apart from magnets and tension, we have also changed the accessories, added a pamphlet to introduce the difference among the four versions.
As for the reason why we put so many rings in maglev, it's because if there are only 2 rings, the tension will change sharply with the distance change. We add more rings to make the tension change closer to linear, which will be more stable than traditional maglev.
We set these cubes at competitive prices, hope more people would like to have a try on it and chose Tianma X3 as your main!
I don't know why my previous comment disappeared😥
@@moretrycube6882
It must've had a link. RUclips usually deletes those.
Anyway, congratulations! Responding to the community is one of the best ways of gaining our trust and respect.
I'm now personally considering your team as a potential Gan Hype Breaker.
I honestly can’t wait to buy the snap one. I have a gan 12 which I currently main but the snap might just squeeze in there :)
Edit: I just got the tengyun from the cubicle and holyyy it’s good
@@awooopibutcube5224 ah
@@thesphyrth maybe youtube tired of getting rick roll
I'm so glad they listened to feedback! I think the snap version might find itself in my mailbox.
Already bought it
@@AvneetKaur-kc5gm How is it?
Most importantly: This needs more likes!
Also props to MoreTry for listening to the feedback and making some improvements and thanks for the updated video.
every company will do the same think
They just can't release cube that everyone dont like they will went out of business
@@pesudion4149
They released their test cubes with the full intention of getting feedback and responding to it.
@@thesphyrth those companies have the brightest future ahead of them. Listening to the criticism is always a good start,
Engineer here: IMO the multiple magnets is super interesting TLDR potentially more linear (spring-like) force curve & varying number of magnets adds another slightly different stiffness adjustment.
These magnets are in series repulsion based on how this is marketed and how they stack when out of the core but still on the screw.
One of the core engineering differences between maglev and spring compression is the nonlinear force curve seen in maglev. It's explained really well in a post on r/Cubers.
Because only a fraction of the compression force- distance curve is used, the maglev ends up feeling approximately linear (like a spring). However, as you move the compression window on a maglev, you’re not only moving the preload force, but the area of the curve you operate at, meaning as you tighten the cube you have more nonlinear effects. Might serve to make the operating range more linear but not sure off the top of my head.
IDK how useful it is, but varying the number of series magnets would allow a third adjustment variable which controls the area of the compression curve you’re operating at (aka the nonlinearity / stiffness ratio) at a potentially lower cost than providing lots of replacement magnets. Not sure how much of a noticeable effect either the linearity or extra adjustment would have but either way it’s super interesting and innovative!
Professional👍🏻
Good info!
I can accept the cumbersome adjustment system since this company is just starting.
@@moretrycube6882 Thanks for the comment and for making a cool cube! Oh and my initial comment got deleted too (reddit link I think)
@@thesphyrth All the extra magnets might be a bit fiddlier to reassemble. I suspect they didn't market /consider the extra adjustment because of that and I imagine it's quite difficult to tune given it's so dependent on the tension setting, but I'm a perennial tinkerer so I'd play with it for sure. The normal 2 adjustment mechanisms should be just as easy as in normal cubes though(it looks identical to my rs3m .
If MorTry tries more cubes, Phill has more tries to do more videos with more MoreTry cubes.
nic-
Underrated
the more MoreTry tries, the more Phil tries MoreTry cubes
@@thoperSought underrated
Yes! They finally released them!
I think the cubicle should make a custom cube for Pablo so he can have his own cube with cubehead
agreed
Magnets spring rates are progressive, the difference between setting 5 and 6 will be more than 1 and 2. Moretry Man said that by using 6 weaker magnets with smaller gaps between makes it more linear, still a curve but closer to a straight line.
As a mountain biker who messes with suspension a lot, I find making a progressive thing more linear very interesting.
5:54 That was the most sus sound made by a human I've ever heard
OWHHH
-Phil yu 2022
I believe they were initially going for the +2 Finisher with their original magnet strength, but failed.
Their Snap Version seems to be their real flagship. And at least now we can see why they don't offer adjustable magnets, and why there are 4 versions. They are now essentially different cubes.
Amazing vid really nice to see that the cubes has improved
I feel like I should get the maglev one just for the purpose of stealing 2 of the 6 magnets to cram into my 3d design 4x4 (and maybe even 6x6, depending on whether I get a 3d printer) The maglev magnets appear smaller the RS3 ones (unless someone measures them and proves me otherwise) so it might be easier to deal with the space constraints of an even cube.
06:31 Had to rewatch it several times at 0.25x speed to understand that wicked magnetic sorcery 😂
I’m actually considering getting this
5:54 MOM I SWEAR ITS JUST A CUBING VIDEO
My moyu Rs3m also did the same U5 and M2 without much effort when it reached 😅🤣
It's good to be back!
Will the Johnthanon and benmajin shirts be on the cubicle?
When are you going to bring back the stickerless version of the snap 3 x 3 more try 😢😢😢😊😊😊
Can you please send these new more try cubes to cubehead, especially the snap version
0:00 nice tank top 👍
Great content like always!
Seems no matter what corner of RUclips I'm in, Max0r finds a way to make an appearance
I'm kind of worried that if I flip a magnet and get it stuck in the center piece, it won't ever come out.
5:53 best
0:53 ah yes
The six magnets each repel each other. It's not like there's a stack of 5 that sticks together, and then repells against the big one.
great vid and loving the jothanon merch
I've been waiting forever for it to even ship
My main cube now is MoreTry Tianma X3 Triple (Snap) and it feels really amazing. I just need to learn new alg so I can reach sub-15 and sub-10 if possible
This is so exciting!
Why does this cube's piece design looks so similar to wrm 2021
They call me ranch cause I be dressing
They call me kid who fell in a pool cause I be dripping
💀
82 pets so far
.what
Hey guys. Nice video. Just wanted to ask if the drawings for the giveaway already happen. And if it did,who won? I entered and can't remember the drawing day. Thanks.
י אלוף עולם נודר
Sad to hear that the magnets have been made weaker. I was looking forward to a cube with super strong magnets, not really for speed, I just really like the feel of strong magnets.
Oh well, I will probably give this one a miss now. Glad I didn't pre-order it yet.
Go for the v4 then
Make a rs3m 2022 before September pls
So excited 😲
PRAISE JOTHANON
Hey so I ordered the snap but it's been over a month should I wait or just get the gan 11 duo some help would be appreciated ty
Do TheCubicle's gift card expire? ( I won one at one of their giveaways that's why I am asking)
Hi what would you recommend more the gan 11 m pro or the more try snap?
5.55 daddy Phil 😫
love the shirt
So still no adjustable magnets :(
I have the mat in the background
The MoreTry Has 120 Magnets
And The V4 Has 132 Magnets
Wassap Jonathon
Shoutout to Damian for Snap
lol
No
I actually prefer the term "Snap" over "Leap". The former makes more sense if you think about it.
They try to accomplish the same thing using different mechanisms. So they won't get into any patent issues.
@@thesphyrth they actually behave differently. The Leap uses attracting magnets to align the cube from above 30° while this one uses repelling magnets to "snap" past the 45° mark. However, this one doesn't fully align the cube
How many tries can moretry try if moretry can try more?
nice editing
I wasnt expecting a max0r mgrr meme, oh well
make jothanon shirt merch
nice
5:54 😳
I will try to get all 4
xman tornado, wrm 2020 or this, I need to buy a new cube pls tell me
Xman tornado
5:54 HAHAHAHA
When are these shipping?
Nice
Why did you rotate for your a perm you use zz
why do people think that ZZ has to be rotationless lol
No cuz I love how this thing is only 15 dollars I think its defitnetly worth it
5:53 HAHAHAHAHA I don't know butthis sounds funny for me.
5:52 what was that noise?
Lol
Snaps for Phil 😆😆
(Legally blonde)
5:53
What was that Phil?
pog
my wrm can do a easy m4 with one flick *flex*
also super funny vid thanks cubicle for making my day better :)
5:54
Wow
7:30 THIS IS NOT A SPRING, PHIL
Hi yo
damn why does phil look hot in that shirt
*pun intended*
Jothanon.
:)
Gan 11 m duo or this
I'm the 777th person to like this. YAY
Do they still have the embossed logos?
IM THE 25TH COMMENT LESS GO
16th. xd.
600th like
nice