Microsoft Teams Direct Routing with CUCM using Audiocodes SBC
HTML-код
- Опубликовано: 4 окт 2024
- Step by Step video to configure Audiocodes SBC to integrate with Microsoft Teams and CUCM.
Here is the blog link that covers all the step by step procedure to configure audiocodes sbc to integrate with ms teams and cucm.
www.uccollabin...
#uccollabing
#uccollabing.com
Integrate Microsoft Teams with CUCM using Audiocodes SBC
Audiocodes
MS Teams
Microsoft Teams
Integration
Direct Routing
Direct Routing with MS Teams
CUCM Direct Routing
Audiocodes Direct Routing
SBC
Audiocodes SBC
Mediant
Audiocodes Mediant
Audiocodes Gateway
Integration
Audiocodes Integration with Cisco Call Manager
Cisco Voice lab
Cisco IPT lab
Cisco IP Telephony lab
Cisco UC lab
Cisco Call Manager Lab
CUCM lab
VOIP Lab
Cisco
Upgrade Cisco Unified Communications Manager
Upgrade CUCM 12.5
cucm 12.5 upgrade
cucm upgrade 11.5 to 12.5
cucm upgrade to 12.5
CUCM installation guide
CUCM 12.5
Call Manager 12.5
CUCM 11.5
cucm licensing
Cisco UC
Cisco Unified Communications
Callmanager
cisco unified communications manager training
CUCM on ESXi
Call Manager on ESXi
Collaboration
call manager
cisco collaboration
Cisco Call Manager
cisco cucm training
Cisco Smart licensing
CUCM
CMS
VOIP
Azure
Microsoft
SSO
SingleSignOn
SAML
LDAP
LDAPS
SecureLDAP
CUCMSecureLDAP
This video is masterpiece and your blogs are impressive.. Thanks you
Thanks for watching the video and sharing the feedback. I am glad that you liked it.
Very knowledgeable video and help to understand the SBC concept
Glad to hear that, appreciated your feedback
A very good and nicely explained content.
Will look forward for many such ones. Thanks for sharing this
Excellent, Thanks for sharing the Knowledge
Excellent , thank you!
Thank you! for sharing this impressive content which is hard to find.Looking forward to more such blogs and learning
Thank you Labh.. i am glad that you liked the content. Ill try my best to share as much as possible. Do you have anything in mind that you want to learn?
Great job! Very easy to understand. How did you connect Teams to the on-premises SBC? Did you use a public IP? I also noticed that calls weren't made directly from the Teams application. Did you emulate Teams using another on-premises PBX?
The video is informative. I was searching for a video on audiocodecs and came across this one. I've learned some good basics. If you create more videos on audiocodecs, that would be wonderful.
Follow this playlist.
Setting up Microsoft Teams from Scratch for Direct Routing: ruclips.net/p/PLBWMbk37x9pOX8Fl1oOW-96C1l8Z7ImdU
Thanks a lot. This video is very detailed and helped a lot.
Good Job bro, really liked the content, Fresh & New
Thank you Dheeraj. Glad that you liked the content.
great content bro! keep it up
This is really very good video for quick learners. Request you to please share video for generate CSR for Audiocodes SBC and upload the signed Certificates (All three you mentioned in this video)
Thank you Gaurav, I'll try to make video of the certificates soon.
Nicest video. Very informative.
Appreciate the content and brief explanations.
Suggestion ~ if you could include the source for your knowledge and brief explanations, it'd give opportunity for us to clarify more on the same. Hoping you'd consider it positive feedback
Thank you for the feedback, i appreciate it. I take it as a positive feedback and I'll try to give more explanation in my upcoming videos.
Excellent !
Glad you like it!
Good one avinash !!
Thank you.
Excellent
Worth to watch this session, just had couple of questions while you are configuring on SBC side what configuration and why we are doing on SBC of you could explain in next session that would help to understand better...like Proxy set, ip to ip routing, Interface etc still unclear is it only require when we are doing direct routing or any other config it has to perform??
Glad you enjoyed it. I will try to come up with the detailed explanation soon.
Excellant lecture. Wondering, how can I get audiocode virtaul SBC?
It;s really good video for understanding SBC, how can I get the audiocodes mediant ve image for Vmware just for testing thanks
Nice video and it is very informative thanks. May I know If CUCM is not at another end how it's configured with the trunk provider?
Thank you Sonal. Though i have not used it in real, it should be simple, on the other end, instead of putting CUCM IP, you need to put service provider ip address and relevant sip config related to your service provider like ports, protocol etc.
Which sip trunk you’ve used for this ?
Standard sip trunk
Nice tutorial. Do you have tutorial for integration MS Team with Cisco CUBE ?
Not yet, but will try to make one soon.
Can you explain how the message manipulation works ?
please make a video to setup lab environment
Sure, will try
Thanks for the video. Is Audiocodes SBC training available in India? please advise.
Not that I know of
Can we get the paid training of SBC ?
So in your video you state you have ...10001 assigned to teams and call manager but in the video it seems teams is 10003. Can you have your cucm extension assigned to teams as well? Its something we have been looking into but have been getting mixed answers.
In this video, we have 10001 assigned to cucm and 10003 assigned in teams which falls in same range 100xx. However you can have same number assigned to teams and cucm, please have a look in this video.
ruclips.net/video/sxvBD3T7uGA/видео.html
@@UCCollabing awesome thankyou so much.
Please share download link of sbc VM
You can try downloading the file from official audiocodes website if you have access to the site
A very good and nicely explained content.
Will look forward for many such ones. Thanks for sharing this.
Thank you Krishna, appreciate your feedback.