HOW TO MAKE A SINGLE MOTOR RC JET/RC PLANE(F15 EAGLE)
HTML-код
- Опубликовано: 25 мар 2021
- Hello everyone hope you guys are fine..!!
This vedio is about how to make a single motor jet.
JET MODEL: F15 EAGLE
PRODUCTS:
Brushless Motor- T-MOTOR 1450kv
Propeller-Gemfan APC 9''
ESC-HITSAN HTIRC Hornet 2-6S 60A
Li-po Battery-Jia Long Xing 6000mAh 11.1V 3S
T-plug to XT60 converter
Metal gear servo
Servo accessories
Servo extentions
TRANSMITTER&RECEIVER:
FLY-SKY FS i6x
BODY Material:
Styrofoam 0.5''
If you enjoyed the vedio give a thumbs up and HIT the subscribe button.....!!!
comment bellow your thoughts about the video....
Stay tuned with ''FLIGHT DECODE''
HAVE A NICE DAY...!!!
''STAY SAFE''
LOVE YOU 3000 
Наука
![Skilla Baby - Misfits (Feat. Polo G) [Official Video]](http://i.ytimg.com/vi/IjsylSnNMyw/mqdefault.jpg)
Using brown paper to increase strength of thermocoal was a new idea for me. It's changes my whole dependence on depron and corosheet.Thanks
The use of thermocol laminated with brown paper is pretty neat idea, the flight was also very smooth but , i would personally recommend running atleast a little aerofoil in the wind as flat wings fly solely on thrust angle and the lift coefficient is pretty low .
all in all the design is pretty simple and would be a great weekend build but for something slightly more crash resistant i would recommend running a spar near the prop line.
Great job 😊
Plan pdf bro?
Wow.. impressive 👌
Carry on❤️❤️❤️🔥
It’s amazing🖤🖤
❣️💘
It's op..
Very very nice friend
Very cool 👍 man. I'm thinking of trying one with a 80mm edf I have laying around.
nice plane
Absolutely amazing bro 👏
Thanks for the visit
Very good plane
❤️🔥
Amazing video bro, the final outcome is stunning. I have never seen any one to use thermocol like this before great idea, thanks for sharing with us.Take love 🥰🥰😍
Thank you very much!
Carry on bro🥰🥰
good job my baby
ভাগিনা আগায় যা 🖤
Super bro nice 👍👍👏👏
Thank you so much
Good work I liked how I made that thermacola flexible nicee 🔥🔥🥺
Thank you! 😊
Pls continue bro
Assalamualaikum. Bro...Nice👍
Congratulation for 3k subscription...❤️🎉🎉
Thank you so much 😀
🖤🖤
Super bro amazing I like it very much add a video to make a rc car please bro
Joxx😇
Excellent video and instructions!
Nice simple make mate. One like from me; this is nevertheless not a jet, but a propeller. I expected a DIY jet plane.
nicr
will 1000kv motor with 1045 propeller work on this plane?
what kind of glue do you use to attach the brown paper with thermocol sheet?
This is great bro.
can we install a camera to do the mapping of the earth's surface?
If you hear it buzzin your losing thrustin'.... open up that hole let that prop breathe a little more.
Aí loved is plane
Jazakallah
Superb bro and the flight was stable in its flight. Such a rich look...
Thanks a ton
Ware r u using brown paper and thermocol twist glue
information. at 20:32, at this point, three-point-eight of the 'wheels have come off' your project. eg.,
the decision to use a prop-slot design;
the decision to use a TWO engine fighter jet as a reference design;
the decision to make an OVER-large TUBULAR structure beneath the wing;
the decision to use a (symmetrical) no-lift wing profile;
the decision to use tailerons;
and INCORRECTLY configured control horns.!!!
cheers googletranslate
Great english
ইনশাআল্লাহ
Flying weight?
Bhai mere pas 1400kv motor or 8045 prop hai is it work
This material is like foam bord
Can you provide us with the design of aircraft
Nice plane..what size your plane bro...
Length 108cm and width 76cm.
Walakum
model plane measurement?
Can i use cardboard?
Hey young man is there an email I may reach you pertaining to a airplane design?
😋😋
Can I get the plan
[UPGRADE] Add camera setup to this model.
we'll add a camera in a next model, till then stay tuned with Flight DeCode.!
No plans?
Detail drawing pls
bhai battery wait kya h
bro browan paper links bro
Los planos ??
Hello, I am from Saudi Arabia. I hope you will write me all the elements in detail so that I can make one for my engineering graduation project🙏🙏
I hope for your reply
@@user-ly8ls6xl3s bro are you asking for electronics. ? Should I tell.
@@RcKing-uz7qh
Yes
Bhai essme thrust angle kitna hai please baatao
thrust angle is horizontally straight. 0 ,the elevator and ailerons are used to change the thrust flow in order to change directions for the plane. Hope you get it.
dommage pour l'imprécision du centrage..pas de pdf.sinon je l'aurai fait !
Propeller size??
9 inch Gemfan APC propeller.
Do you have the plans in PDF?
sorry, we don't.
ভাইয়া আপনি মোবাইল দিয়ে ভিডিও করেন?
নাকি ক্যামেরা দিয়ে?
-cpscs
এই ভিডিও টা ডিএসএলআর দিয়ে করা আগে ফোন দিয়েই ভিডিও করতাম...
RC plane ki pumaish kya inchi tape se bataen kitni Jo Shadow wale pankh hai kya unki inki tape se bataen aur drawing ka jo hai main link dijiye Ham use Bank ko
iss jet plane ki pdf mil jaegiii bhaiii
Can you give pdf .? Plane design
sorry, we don't have any digital copy.
one thing that aal you forgot its landing gears
Thanks for your comment and landing gear isn't compulsory for small rc plane.
are u bangladeshi?
হ্যাঁ, আমি বাংলাদেশী
@@RCMemberBD tnx a lot
Chalu...... 🧏♂️🧏♂️🧏♂️🧏♂️
ভাই এই বিমানের নকশার কাগজ গুলো যদি পিডিএফ ফাইল করে দিতেন তাহলে আমি বানাতে চেষ্টা করতাম। প্লিজ ভাই যদি পারেন তাহলে দিয়েন।
ভাই আমাদের এই প্লেনের কোন ডিজিটাল কপি নেই
Fight diagram please
small motor heavy body :(
Send me model pdf please
bai please ap moje is model ki full kit ki photo email kar do please
please,cheak the video description all parts are named there for this model..
mey samaj nahi raha ho please debo
Brother I want that exact dimensions bro
sorry, we tried our level best to give the exact dimensions in the video.
Mama eto valo english kobe shikhli???😬
This is totally incomplete video..there are no proper measurements and the angles not mentioned
we had used a 9 inch propeller and the motor angle is parallal with the planes body sheet.
All the dimensions are shown, you just need to pause the video to copy them. The paper surfaces are a good idea. If you have access to a large format printer you can print out a coloured top surface for the wing to get a decorated effect. It will add strength, but I suspect that the plane doesn't need it, so you can save time by not covering the styrofoam. Great stuff, well done.