Nesse 2º vídeo vou mostrar de forma simples e rápida a parte de preenchimento do prusa slice. Nosso site: 3dzilla.com.br instagram: / 3dzillabr Facebook: / 3dzillabr
Start Gcode G21 ;metric values G90 ;absolute positioning M82 ;set extruder to absolute mode M107 ;start with the fan off G28 X0 Y0 ;move X/Y to min endstops G28 Z0 ;move Z to min endstops G1 Z15.0 F9000 ;move the platform down 15mm G92 E0 ;zero the extruded length G1 F200 E3 ;extrude 3mm of feed stock G92 E0 ;zero the extruded length again G1 F9000 ;Put printing message on LCD screen M117 Printing...
End Gcode M104 S0 ;extruder heater off M140 S0 ;heated bed heater off (if you have it) G91 ;relative positioning G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure G1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more G90 ;absolute positioninga G1 X0 Y200 F3600 ;move extruder out of the way by moving the baseplate to the front for easier access to printed object M84 ;steppers off
ah uma outra dica seria trabalhar a retração na peça com o Prusa.
mto legal suas explicações, parabéns amigo.seu canal e dos poucos que fala sobre o prusa, estou usando e me adaptei bem com o fatiador. valeu!
Top seus videos meu brother teria com vc manda os start g-code e endg-code da tarantula ?
Start Gcode
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
G1 Z15.0 F9000 ;move the platform down 15mm
G92 E0 ;zero the extruded length
G1 F200 E3 ;extrude 3mm of feed stock
G92 E0 ;zero the extruded length again
G1 F9000
;Put printing message on LCD screen
M117 Printing...
End Gcode
M104 S0 ;extruder heater off
M140 S0 ;heated bed heater off (if you have it)
G91 ;relative positioning
G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more
G90 ;absolute positioninga
G1 X0 Y200 F3600 ;move extruder out of the way by moving the baseplate to the front for easier access to printed object
M84 ;steppers off
valeu tmj.....