Thanks for the great information Sid 👍 I like this machine a lot. I saw in your last test with the Kruzer, Nox and Deus. What impressed me was the Kruzer was the only machine able to detect past the unknown lump of coke in the clod and picked up the target. I was looking at the Nox for my next machine but now Kruzer has made me think again 🤔
I do appreciate the tips Sid, May I ask,.....I've seen your 3tone setup,,,,, is the DEEP setup the same as your 3tone? notch/disc/tone etc etc? #learning
What would be a suitable setting for stubble field. The reason I ask is I run 3 tone on 89 gain. But when I swipe through the stubble it’s constant chat so it’s getting in the way of a genuine signal. I can swipe over the top of the stubble but at 8 inches above I’m loosing so much depth. Any ideas
loving the vids on the kruzer, just got one myself. can i ask how you attached the cam to your spade shaft as the supplied bracket on mine is to small for the shaft GL & HH
Nice vid sid 👍Just a question on the ground balancing , when you say drop the sensitivity do you mean the gain setting ? Can’t get mine to ground balance properly at all .
Hi Sid, 1.You Make me bye a "Makro Multi Kreuzer" ! I 'am satisfied by the quality for it. Can't you explain (I quote you) you say "sentevisity at 60-70" -> do you not mean "Gain" down to 60 -70"I can't find sensitivity ??? 2.Please Sid can't you make at "How to maske the Save "SETTINGS" for open water / Dive / Snorkel / Scrubber dive Seart with the Makro Multi KruzerI Can't Make the Settings for snorkling with it. Best Regatrds - DK MD DIGGERS Henrik.
gain /sensitivity is same mate... to save settings... options, scroll down to save then push left/right until you see sd and then click select... if you see fd then thats how you do a factory default
thesearchermag Okay maby my elglish is not that good, I trayed I 2th question to ask you, how do I do when I 'am snorkling/scuberdiving about program Beach / deep, and gain setting, "I know SD & FD, I have read the manual and it dosn' t say mutch about going under water metal detecting. Sorry for the misunderstanding. Best regards Henrik
Thanks for the great information Sid 👍
I like this machine a lot. I saw in your last test with the Kruzer, Nox and Deus. What impressed me was the Kruzer was the only machine able to detect past the unknown lump of coke in the clod and picked up the target.
I was looking at the Nox for my next machine but now Kruzer has made me think again 🤔
Roman Isca Detecting I’m trying to decide between the Nox 800 and the Multi Kruzer. What did you decide?
Thanks for the demo! Just ordered my Multi K after watching
Awesome video I've got a kruzer on the way I can't wait to use the machine it looks to be pretty impressive
Cheers Sid, good tip on ground balancing, looking forward to using my Kruzer, seems a decent upgrade on the Racer 2
I do appreciate the tips Sid, May I ask,.....I've seen your 3tone setup,,,,, is the DEEP setup the same as your 3tone? notch/disc/tone etc etc? #learning
Oui le makro multi cruzer que j’ai en bretagne et une très bonne machine
Ça marche tjours bien??
Do you use the same settings on deep mode as for 3 tone? Or is it similar and you tweak the settings a bit?
What do you mean with "under 90 3 tones is rapid fire"? Does it mean that the signals are detected quickly?
What would be a suitable setting for stubble field. The reason I ask is I run 3 tone on 89 gain. But when I swipe through the stubble it’s constant chat so it’s getting in the way of a genuine signal. I can swipe over the top of the stubble but at 8 inches above I’m loosing so much depth. Any ideas
loving the vids on the kruzer, just got one myself. can i ask how you attached the cam to your spade shaft as the supplied bracket on mine is to small for the shaft GL & HH
Great video this, thanks sid
Nice vid sid 👍Just a question on the ground balancing , when you say drop the sensitivity do you mean the gain setting ? Can’t get mine to ground balance properly at all .
something else to try if it wont ground balance is switch the machine on with the coil well off the ground and select your programe before gb
Looks like a good machine!
Cheers Sid
Make a video using the Makro Gold Kruzer. Please ???
which program did you used ???
Is it better than equinox 800 or XP Deus?
My Kruzer is coming tomorrow, I hope
how much you pay?
- In my country price is 1000e :/
Good tips .just can't see the screen
Brilliant good review Sid
#thetoffeedigger
Do you use EUD.
i don't very often to be fair.. ill dig a signal with any sign of none ferrous anyways
It’s like your on a mini tv screen😂
This machine wont go deeper that 1 ft and no 6.4ft deep🤨 as told by dealer.
Please lower the Volume of the intro music.
Hi Sid, 1.You Make me bye a "Makro Multi Kreuzer" ! I 'am satisfied by the quality for it.
Can't you explain (I quote you) you say "sentevisity at 60-70" -> do you not mean "Gain" down to 60 -70"I can't find sensitivity ??? 2.Please Sid can't you make at "How to maske the Save "SETTINGS" for open water / Dive / Snorkel / Scrubber dive Seart with the Makro Multi KruzerI Can't Make the Settings for snorkling with it. Best Regatrds - DK MD DIGGERS Henrik.
gain /sensitivity is same mate... to save settings... options, scroll down to save then push left/right until you see sd and then click select... if you see fd then thats how you do a factory default
thesearchermag
Okay maby my elglish is not that good, I trayed I 2th question to ask you, how do I do when I 'am snorkling/scuberdiving about program Beach / deep, and gain setting, "I know SD & FD, I have read the manual and it dosn' t say mutch about going under water metal detecting. Sorry for the misunderstanding. Best regards Henrik
Can not see anything