DigiTrak - Falcon F5 Training- Transmitter Selection and Frequency Optimization
HTML-код
- Опубликовано: 6 фев 2025
- In this video, Digital Control Inc. Worldwide Training Manager Mark covers the transmitter selection and Frequency Optimization screens for the DigiTrak Falcon F5 HDD Locating system used in Horizontal Directional Drilling.
Looking good 👍👍😘😍
Please explain the down band vs up band. I must have missed that part. I understand they are different but why and whats the reason? Can you switch in the middle of a shot?
Hi Steve, The reason for 2 bands is to give you 2 options to combat interreference along your bore path. You are able to switch mid bore using our 10-2-7 Roll Sequence. If you ever need any assistance with these things, please call us at 1-800-288-3610. Our Customer Support Team can walk you through all these things step-by-step, as needed.
My question is when you select the different frequencys do you always chose the lowest frequency
Good question! The answer is yes, but not always. Some frequencies perform better in certain environments. As a general rule lower frequencies perform best in areas of passive interference, higher frequencies work better in areas of active interference and the mid-range works best for depth. So in some cases you may choose a frequency band that shows slightly more interference than another. For example, if you were drilling under a sidewalk I would almost always program in band 7 on a wideband transmitter. If I were around power lines I would almost always program band 43. Regardless of the band you chose doing some above ground range testing prior to beginning your bore should give you assurance that you have the signal strength needed to complete the project without interruption. Hope this helped! Feel free to call us at 800-288-3610 for additional help.
How do I put a pin code on the f5 ?
Good
Sou Brasileiro e gostaria de mim escrever , para um curso traduzido em português
You guys need to figure out a way to switch frequencies without having to take it out of the head, it hurts production when we jump around alot
You can switch frequencies down hole using the 10-2-7 roll combination just like in the regular F5. If you need help walking through this, call DCI at 800-288-3610, or head to digitrak.com and download the manual.
I wuant to know if you have somenting for concret,because is so hard to do the jomp when i Cros concret and rebar
WHAT I'M LOOKING FOR IS AUTOMATIC, JUST SWITCH ON, READY USED NO MORE TOO MUCH TALKING
Looking good 👍👍😘😍