I built a 24 lbs. Fat Bike a few years ago and it's my favorite bike - I ride it all year round on the same single tracks where I ride my FS Trail bike.
@@syedzgaming Frame direct from factory Chinese Carbon frame for $550, (yes, all carbon bike frames are made in China), Whisky 9 carbon Wheelset, Raceface Next SL crankset, Sram XX1 11 speed drivetrain, Raceface carbon bars, carbon seat post, Wolftooth grips, Cake Eater tires, Hope huds, and Hope brakes..
Beautiful! Lots of grease used there! Maybe that why my old bikes are all frozen up- not enough lube! Surprised to see grease on the handlebar clamp though, we NEVER put grease there, your bars will never stay put! Maybe it is necessary with the carbon fiber bars? I just ordered a Gravity Bullseye Monster 5 for my first fat bike. Those RockShocks cost more than my whole bike!
Sweet jeeves that was insane! Superslick editing, magical winter light - and the siiiickest fatty in the world. You've never seen a Canyon like that before!
Is the grease on the handlebars specific to carbon fiber bars? Coming from BMX and being an offroad newb, I would have thought reducing friction would be a bad thing.
Hmmm. Well, basically it was a stock Canyon Dude but slowly parts were swapped out for what you see if the video. All bought separatelty. So, all in, what would it be, 6k eur? Of course selling off stock bits, you make some back
Fantastic video! Shredding Bliss - I would be really interested to know if you are using an after-market rim strip to set-up Tubeless? Couldn't quite work out from the video and have been having some trouble with the Dude I have just taken delivery of (obviously with a different wheelset, but hoping principle is the same!)
Thanks a lot, glad you liked it! These are carbon rims from a company called Nextie. They have a 32mm wide rim tape on (enough to cover middle channel), after market yes. With alloy, fat rims you have more issues sealing it because of the gaping holes in the rims. I’ve used gorillatape in the past. In any case, as long as your tape covers the widest part that can let in air, you should be good
@@ShreddingBliss really appreciate it thanks! Maybe the Nextie's can be a future purchase down the line! Keep up the great videos, I watched this about 10 times before hitting the button with the Dude! Fantastic quality.
@@JIMBOTHECANNON you won’t regret it! If you really want to put versatility into the Dude, get a pair of 650B wheels (eg carbon) and run 3.0” tyres. Then if you ride in the snow, put on 4” snow tyres.
I just bought a SRAM FAT5 crankset and I wasn’t aware of the -4mm offset chainring. You have an Absolute Black chainring with what appears to be a negative offset (reverse dish) yet they don’t have any on their website and I have emailed them and it is not something they make. Do you know what your chainring offset is?
That was the first thing I thought when I saw this as well. As someone who has tried mounting their AB oval onto a SRAM direct mount crank, the oval timing isn’t in the right place when you flip the ring for negative offset. The chainring in this video would probably ride horrible lol. One would need to reverse a regular circle chainring for the same gold look.
It’s in the video, near the end. A little over 13kg. It’s heavier now with the 3,8” Hodags. In non deep snow conditions, it sports 3.0” Bombolonis and is around 12,5kg
@@edugiselle1 search for ”SRAM XX1 Eagle DUB Fatbike Crank 1x12 | FAT5 X-SYNC 2 Direct Mount chainring”. At least here in Europe there are several online sites that sell these.
@@ShreddingBliss I have found it but not a golden color like the one in your video, I see a difference in the product shown in your video. I want exactly the same from your video
One of the employees at the bike shop I went to , owned a 20 pound fat tmmountain bike it was awesome. You could put a down payment on a house, for the cost of that bike lol
It went together easily in less than an hour. ruclips.net/user/postUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L Make sure the front fork is forward or the pedals will hit the front tire. Tires are both a little soft so it needs air before I ride it. The rear wheel didn't come with a clamp regular bolts hold it on. The front had the clamp. No scratches out of box. Rims are a little off with a slight wobble. They could have spent more time with the spoke tool fixing the run out. So far out of the box I'm happy with it. I did replace the pedals with a nice aftermarket set. After riding it a bit my A$$ is a bit sore so I ordered another seat. Overall I'm nearly 60 and didn't ride a bike in 30 years. I like my new 29" Schwinn. It will be used for casual rides with my friend.
I was kinda dumbfounded by the fact that you didn't have the bike in the stand after mounting the wheels. As a bike mechanic myself i know that bending your back and being on your knees like that destroys your body. otherwise a clean and well greased bike bild
@@ShreddingBliss Hi, i was wondering as well, how did you manage to get the bike frame in all Black? As i saw on Canyon's website, the stock colour of the frame for all Dude models isn't in full Black as seen in your video, did you custom paint it or something? Any advice would be great! Great video btw! 👍🏻👍🏻👍🏻
@@ShreddingBliss Mine too. Put it on the car rack outside my house, went into change clothes, came back out 10 minutes later and it was gone. So I got a new Dude. Amazing ride year round, particularly with a mastodon, 27.5 and hodags.
@@alexanderjendreck6356 even the stock sram GX chainring is reverse dish for FAT 197mm. This is the same. So I don’t really know what more to say other than I’m fairly certain it’s supposed to be reversed. Not that it’s my bike, mind you..
Excellent vidéo. I’m more struck by the beauty of the tools you’re using. Have fun. 🤩
Thanks so much! Yes, lovely tools 😍
Dispenses grease from dedicated tool. Spreads it with finger anyway. Not sure what the point of some of these tools is! 😂
One of the most beautiful and peaceful videos I’ve seen. Amazing ❤️
Oooh thank you so much! 🙏🏻🙏🏻
awesome build!! bit surprised with the weight ,
I built a 24 lbs. Fat Bike a few years ago and it's my favorite bike - I ride it all year round on the same single tracks where I ride my FS Trail bike.
Nice!! 🙌🏻🙌🏻
Wow thats light, more details on the build please
@@syedzgaming Frame direct from factory Chinese Carbon frame for $550, (yes, all carbon bike frames are made in China), Whisky 9 carbon Wheelset, Raceface Next SL crankset, Sram XX1 11 speed drivetrain, Raceface carbon bars, carbon seat post, Wolftooth grips, Cake Eater tires, Hope huds, and Hope brakes..
Enjoyed watching your video thanks for sharing
🙏🏻🙏🏻🙏🏻🙏🏻
Bike with Gold chain I like it👌👌👌👌
Ok, forget the motorcycle. You got me.
This is passion at it's finest! Love it!
Gorgeous bike! Great tools!
F a n t a s t i c !
Beatiful video and bike
Excellent wheelset.
Epic edit,sick looking bike,Matt black with gold components very nice indeed
Thanks so much! Stoked that you like it! 🙏🏻
that's a good bike i use it with the bafang 750 mid-drive 44mph the bike and wheel combo are fantastic.
Bellissima 👋👋
Complimenti
Mil grazie! 🙏🏻
Amazing... I want to build FatBike for myself in near future and hope that it will be as easy looking as your build. Great video.
Sounds like fun. Enjoy!! 🙌🏻🙏🏻🙏🏻
Masterpiece!
Beautiful!
Lots of grease used there! Maybe that why my old bikes are all frozen up- not enough lube!
Surprised to see grease on the handlebar clamp though, we NEVER put grease there, your bars will never stay put! Maybe it is necessary with the carbon fiber bars?
I just ordered a Gravity Bullseye Monster 5 for my first fat bike.
Those RockShocks cost more than my whole bike!
Such a beautiful bike!
cool bike
This was so satisfying and piece ! I love it man
Thanks so much. Glad you liked it!!
Sweet jeeves that was insane! Superslick editing, magical winter light - and the siiiickest fatty in the world. You've never seen a Canyon like that before!
You have my subscribe! love that sweet ride!
nice movie off a very nice build. still weighs a lot.
Sweet!
Nice build. Glad I’m not the only one that needs to fiddle around with a seat for a bit to get the rails in 😅
The struggle is real, 100% 😅
W😲W!!!Beautiful fatbike!!👍🏻👌🏻
Glad you like it!! 🙏🏻
Beautiful
Is the grease on the handlebars specific to carbon fiber bars? Coming from BMX and being an offroad newb, I would have thought reducing friction would be a bad thing.
It’s carbon paste. Sand-like grease to keep carbon components from slipping under force when torqued to low specs
@@ShreddingBliss makes sense, thanks for the reply!
Fabulous Build Sir!!
Wow! Fantastic fat bike build video. What would one like it cost me?
Hmmm. Well, basically it was a stock Canyon Dude but slowly parts were swapped out for what you see if the video. All bought separatelty. So, all in, what would it be, 6k eur? Of course selling off stock bits, you make some back
@@ShreddingBliss Very nice swapping your stock to a dream. Love it...
Hey Mate. I love your Canion Dude and you video is very peacefull. I wish i could work in a bike repair shop. I have a fat bike too.
Thx so much! Glad you liked it!
Incredible!!!!
Hope I get the budget to build like one! I have all stock Trinx M516D
Nice build 😎👍
I wonder where to buy those I9 hub 197mm?
wow..dream bike
Works Component headset, topcup mark front & lower cup mark towards rear wheel ( slack or steep? )
Slaaaaaaack 🙌🏻
@@ShreddingBliss great👍🏻 so i just follow in your video. Nice Bike S.Bliss
Does Canyon Dude original headset has lower cup?
@@Ganda-ze1hu i am not sure, actually!
loud but gangsta.
Hi
Beautiful build
What Q factor is your XX1 crank?
Is it fat4 or fat5?
197 rear hub spacing.
Se puede adquirir con amortiguadores Fox 38 y Marco 27.5
Which grease did you use? Beautiful bike build video 👍🏻
Motorex white grease
@@ShreddingBliss thanks
i love it:-))
Fantastic video! Shredding Bliss - I would be really interested to know if you are using an after-market rim strip to set-up Tubeless? Couldn't quite work out from the video and have been having some trouble with the Dude I have just taken delivery of (obviously with a different wheelset, but hoping principle is the same!)
Thanks a lot, glad you liked it! These are carbon rims from a company called Nextie. They have a 32mm wide rim tape on (enough to cover middle channel), after market yes. With alloy, fat rims you have more issues sealing it because of the gaping holes in the rims. I’ve used gorillatape in the past. In any case, as long as your tape covers the widest part that can let in air, you should be good
@@ShreddingBliss really appreciate it thanks! Maybe the Nextie's can be a future purchase down the line! Keep up the great videos, I watched this about 10 times before hitting the button with the Dude! Fantastic quality.
@@JIMBOTHECANNON you won’t regret it! If you really want to put versatility into the Dude, get a pair of 650B wheels (eg carbon) and run 3.0” tyres. Then if you ride in the snow, put on 4” snow tyres.
I have a Dude 8 that came with the rigid fork and I want that Bluto. It looks like 27.5 x 3.8 barely fit with that fork. Any issues?
No issues at all! That’s a 3.8” 650B tyre! (Stock wheels are 26”).
I just bought a SRAM FAT5 crankset and I wasn’t aware of the -4mm offset chainring. You have an Absolute Black chainring with what appears to be a negative offset (reverse dish) yet they don’t have any on their website and I have emailed them and it is not something they make. Do you know what your chainring offset is?
Use absolute 3mm and instal it backward
@@neverstockjp it’s SRAM not Raceface. They don’t mount backwards.
That was the first thing I thought when I saw this as well. As someone who has tried mounting their AB oval onto a SRAM direct mount crank, the oval timing isn’t in the right place when you flip the ring for negative offset. The chainring in this video would probably ride horrible lol. One would need to reverse a regular circle chainring for the same gold look.
Let me know when you are gonna sell this beauty. ❤
Already sold, actually! 😭
What did you inject in the wheel
tubeless sealant! 🙌🏼
Rad bike, dude ;)
😍🙏🏻
What price?
Dream's bike
Was that tubes plus Stans no tubes?
Hah, no sir! No tubes here!
Awesome
🙏🏻
Do you mind telling us what the offset is on the rockshox Bluto. Thanks
Hmm, I don't actually know! Does the Bluto come in multiple offset options?
What is the weight of this beauty?
It’s in the video, near the end. A little over 13kg. It’s heavier now with the 3,8” Hodags. In non deep snow conditions, it sports 3.0” Bombolonis and is around 12,5kg
What size is the crankset gold ? today a technician told me that there is no sram xx1 gold for fatbike
This is an XX1 crankset for 197mm rear hub spacing fat framw
@@ShreddingBliss I have tried to find this crankset and it is nowhere to be found. Where can I buy it and what is the price?
@@edugiselle1 search for ”SRAM XX1 Eagle DUB Fatbike Crank 1x12 | FAT5 X-SYNC 2 Direct Mount chainring”. At least here in Europe there are several online sites that sell these.
@@ShreddingBliss I have found it but not a golden color like the one in your video, I see a difference in the product shown in your video. I want exactly the same from your video
@@edugiselle1 ah you mean the chainring. Ok. So that’s actually an Absolute Black oval chainring installed on an XX1 Eagle crankset
One of the employees at the bike shop I went to , owned a 20 pound fat tmmountain bike it was awesome. You could put a down payment on a house, for the cost of that bike lol
LOCA!!!!🤭😜🔝⚡👉🚴♂️✊🤙👏👏👏👏👏👏👏👏
Total cost ???
Priceless! 🫣
$10,000 build at least. Canyon frames are very nice and very expensive.
It went together easily in less than an hour. ruclips.net/user/postUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L Make sure the front fork is forward or the pedals will hit the front tire. Tires are both a little soft so it needs air before I ride it. The rear wheel didn't come with a clamp regular bolts hold it on. The front had the clamp. No scratches out of box. Rims are a little off with a slight wobble. They could have spent more time with the spoke tool fixing the run out. So far out of the box I'm happy with it. I did replace the pedals with a nice aftermarket set. After riding it a bit my A$$ is a bit sore so I ordered another seat. Overall I'm nearly 60 and didn't ride a bike in 30 years. I like my new 29" Schwinn. It will be used for casual rides with my friend.
HOOOOTTT!!!!!!
🥰🙏🏻
Mitä tuo angle setin asennus vaatii?
Tähän ei muuta tarvittu kuin prässiä. Helppo asentaa 👌🏼 Kunnon työkalut auttaa
What kind of lubricant are you using?
You didn’t put blue thread locker on the disc brakes
White grease!
I was kinda dumbfounded by the fact that you didn't have the bike in the stand after mounting the wheels.
As a bike mechanic myself i know that bending your back and being on your knees like that destroys your body. otherwise a clean and well greased bike bild
Fat Bike 👍👌👌👍❤️
What is the frame is this?
Is a carbon Canyon Dude frame
@@ShreddingBliss Iam from Bangladesh can I get this from Bangladesh?
@@thatsmahim822 you will have to go on Canyon’s website to check to where they ship
@@ShreddingBliss Hi, i was wondering as well, how did you manage to get the bike frame in all Black? As i saw on Canyon's website, the stock colour of the frame for all Dude models isn't in full Black as seen in your video, did you custom paint it or something?
Any advice would be great!
Great video btw! 👍🏻👍🏻👍🏻
@@l00kie4m3 this model is a few years old. They used to have it in full black
Че за белая смазка которую он пихает везде?
👏👏👏👏👏👍
Hello dude.wt brandname this fatbike
It’s a Canyon Dude!
Ok, I was off by about $2500 - that's a $12,500 build.
Mikä eturatas ja millä offsetilla?
Taitaa olla Absolute Black ovaali eturatas ja olisiko 6mm offsetillä? En ole varma, pyörä ei ole minun.
@@ShreddingBliss oliko ratas käännetty toisinpäin että ketjulinja pysyy?
@@emiliaf-p1410 en ole varma voiko sitä asentaa ’toisinpäin’, mutta joo se tulee ulospäin. Ketjulinja hyvä
im gonna need a loan!
i want one
Dream bike build and you use bontragers
Not many tire brands’ compounds are good in the mega cold and snow! 🤙🏻
Can you give me that bike because I want a fat bike i'm in the Philippines
Hehee, sorry buddy, it's not my bike to give away :)
@@ShreddingBliss ok
the head stem is un even uuuuuuuuuuuuuuuuuuuu
Top ,compra 1 dessa eu nao tenho condiçoes , mas se alguen tiver 1 encostada que nao usa, e quiser doa eu aceito 😊
Hello johnny sins
Sir can u make a bike for me
Well, I can always film one! 😅🙏🏻
@@ShreddingBliss please
Reply please
@@nanasahebargade3988 name the time and place, brother! 😇😅
Painfull to watch since mine got stolen
Oh no, that sucks!!!
@@ShreddingBliss Mine too. Put it on the car rack outside my house, went into change clothes, came back out 10 minutes later and it was gone. So I got a new Dude. Amazing ride year round, particularly with a mastodon, 27.5 and hodags.
Well i treat myself and buy a brand new one from canyon… so happy right now
Онанизм
Chainring is wrong installed😂😂
Nope, it’s in the intended orientation. It’s an absolute black
@@ShreddingBliss i know i ride them too but as a mechanic its wrong
@@alexanderjendreck6356 it is reversed, yes. But the rear hub spacing of this bike is 197mm, that’s why it’s reversed. Chainline is good.
@@ShreddingBliss but u know that it is wrong😂 how ever even if you look on the picture from the Video maybe you check what i mein😂
@@alexanderjendreck6356 even the stock sram GX chainring is reverse dish for FAT 197mm. This is the same. So I don’t really know what more to say other than I’m fairly certain it’s supposed to be reversed. Not that it’s my bike, mind you..
How much it cost?
Hmm. With all the upgrades? 5,5k?