I just finished the video and in a few days I will finish the tutorial, thanks for understanding guys. Leave me a comment if you have a question and I will answer soon.
Hi there, nice vid! I just got a 360 phat with a Falcon board few weeks back and just received JR programmer and coolrunner today. But I also picked up a 360 S (dirt cheap) with a Corona as it has 12v,9.6 A. the question is, am I right in thinking I can only use the coolrunner on the Phat and I need to get a X360ACE S-RGH for this slim ?? Any help suggestions welcome.. I been modd'n ps2 , ps3, vita's,dreamcast and multiple other systems - now doing a ps4 - but never touched an XBox 360.
im honestly just here cause i picked up a xbox 360 phat halo edition that has that cool runner board in it also it has orange led lights i was just doing research wondering what exactly it does
Hi, I have a question. Can you RGH 3.0 your Xbox with the JR programmer? I found this guy and he’s gonna go RGH my console cause I know nothing about soldering so I’m just curious.
so confused, do i plug the xbox in, and just not power it on? --- or am i supposed to turn it on to be able to read the nand, but you're just warning that to do this you could possible damage your xbox having it on, while attached to this programmer? so confused here...
hello can you help me i read nand no problem and i create and write xell no error i try booting the console with eject to get the cpu key it turn on by flashing the middle light only and there is no display neither hd or av im i doing somthing wrong ? im using picoflasher btw the console is japanese falcon
I found the solution for you. www.se7ensins.com/forums/threads/diy-tutorial-matrix-spi-nand-flasher-upgrade-to-cpld-coolrunner-glitch-chip-programmer.1317809/
Nice tutorial!
I just finished the video and in a few days I will finish the tutorial, thanks for understanding guys. Leave me a comment if you have a question and I will answer soon.
you're late. there is rgh 3.0 and it's so much easier than this
Best rgh tutorial on youtube c:
Thanks man
Hi there, nice vid! I just got a 360 phat with a Falcon board few weeks back and just received JR programmer and coolrunner today. But I also picked up a 360 S (dirt cheap) with a Corona as it has 12v,9.6 A. the question is, am I right in thinking I can only use the coolrunner on the Phat and I need to get a X360ACE S-RGH for this slim ?? Any help suggestions welcome.. I been modd'n ps2 , ps3, vita's,dreamcast and multiple other systems - now doing a ps4 - but never touched an XBox 360.
Hello, yes, you are right. You need the Ace V3 and so S-RGH.
So I have a Xenon and I just want to know how to find out if or what the EXT_CLK method is.
im honestly just here cause i picked up a xbox 360 phat halo edition that has that cool runner board in it also it has orange led lights i was just doing research wondering what exactly it does
Hi, I have a question. Can you RGH 3.0 your Xbox with the JR programmer? I found this guy and he’s gonna go RGH my console cause I know nothing about soldering so I’m just curious.
Cat approved
Cool
Thanks my friend
@@ReMARKCHANNEL you're welcome
@@ReMARKCHANNEL I am from Malaysia ipoh and you where you from
@LEE CHIN LEONG I'm from Russia, currently live in China.🙂
i did everything but i don't have the xell blue screen it goes right on the xbox main menue can you help me plz?
Check the wires, bad soldering
If you soldered everything and patched flash memory, your Xbox should not boot normally
After wrote all RGH Data, can inremove the JR Programmer WITH all cables?
Yep, just leave the cool runner.
Could you tell me what did you do when you've got the error: xilinx device not detected ???
Well, sorry for the late answer, I don’t remember this part well, but checking the connection on the motherboard should help.
Hi ! pls help me T.T , I have a xbox 360 zephyr, when I want to create Xebuild it always says wrong CPU key 🤯
1.2 dont work on zephry only ext_clk rgh and you need the Octal450/J-Runner-with-Extras
looking at this video its the old way of rgh 1.2 and it do not work on xenon or zephyr only falcons and jasper ext_clk work on most zephry and xenons
Great video but were can i buy those chips (coolrunner etc.)
eBay, aliexpress
amazon broooooo prime
so confused, do i plug the xbox in, and just not power it on? --- or am i supposed to turn it on to be able to read the nand, but you're just warning that to do this you could possible damage your xbox having it on, while attached to this programmer? so confused here...
just plug it in do not turn it on
@@qhronoz1554i managed to get it all the way done, just adding games through xexmenu now ^_^
Thank you for your video
But the link of timming files not working
I'll check it
Where can I buy the coolrunner and the jr programmer?
AliExpress (China) eBay (USA)
@@ReMARKCHANNEL in 🇦🇪
coolrunner working on xbox 360 silm?
do you know where i can find a rev c coolrunner board?
Aliexpress
hello can you help me
i read nand no problem and i create and write xell no error
i try booting the console with eject to get the cpu key it turn on by flashing the middle light only and there is no display neither hd or av
im i doing somthing wrong ?
im using picoflasher
btw the console is japanese falcon
Same 💔
@@Emulator_test i fixed it
i forgot i have to do the full mod in order to get cpu key
Would this work with the coolrunner REV-D?
Hello, check this video ruclips.net/video/dYMIRV1VyhU/видео.html
@@ReMARKCHANNEL Removed R13 and CAP - works flawlessly
how if i use matrix nand flasher not with jruner
As far as I know, first, you need to modify your Matrix flasher. I will answer your soon after researching
I found the solution for you. www.se7ensins.com/forums/threads/diy-tutorial-matrix-spi-nand-flasher-upgrade-to-cpld-coolrunner-glitch-chip-programmer.1317809/
Thanks bro you're the best
The solder doesn't stick to the motherboard for me
Do u use flux?
i used rosin flux no clean its like watery.
How do I install the drivers
Is this question still actual ?
@@ReMARKCHANNEL yes
@@slickpads4542 will check it and reply
@@slickpads4542 windows 10?
@@ReMARKCHANNEL yes
i would like to know more
Text me on my Instagram.
Ive never seen anyone use that soldering tip....
Knife tip is great. Holds a good amount of solder and rapid heat transfer.
Can you make how to Ace V3 a slim next?
Give me some time, I will finish the tutorial for jasper and I will answer you. Thanks for understanding.
Is it trinity?
ruclips.net/video/OgMYchTNuHk/видео.html use this video, I don't have slim version of the console;)
How to hack xbox 360 E model 2014.11.26